• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.15-25
• /
• 2003

Wireless ad-hoc networks are only composed with mobile devices. Unlike the traditional wired networks, those devices are mostly operated with battery power. Since the battery-operated power is limited, the efficient energy resource managements becomes an important issue in wireless ad-hoc networks and various studies that considered these characteristics are progressed. One of those studies is an energy efficient routing using coordinators. In this method. only devices elected as coordinator participate in data transmissions in ad-hoc networks, while other devices remain in sleep node. The overall energy consumption of a system can be reduced. In order to minimize energy consumption of a total network, previous results try to maximize the number of nodes in sleep mode. However, minimizing the number of coordinators does not ensure to increase the system lifetime. In this thesis, we propose an algorithm that can elect coordinators with considering the amount of necessary energy to transmit assigned data and a connectivity of nodes in the networks. The result of proposed coordinator election algorithm can increase the system lifetime of an Ad-hoc network from the results of existing coordinator election algorithms.

• Journal of Life Science
• /
• v.29 no.6
• /
• pp.740-746
• /
• 2019

It is well known that exercise may have a positive effects on dementia. However, most of dementia-related studies were performed about symptom care, diverse treatment and drug treatment. Although regular physical exercise plays an important role of brain function and dementia prevention, only a few research studies showed the effect of physical exercise on dementia and brain function. This study is to investigate about the sleep-related factors (melatonin, serotonin), dementia-related factors (BDNF, beta-amyloid, IGF-1, Irisin, GLUT) with physical exercise. This study revealed that Myokine (Irisin, IGF-1), GLUT and Melatonin is an important factors to improve or sometimes delay the symptoms of dementia through BDNF activation following endurance exercise. However, these results were controversal following the various kinds of exercise type, mode, duration and exercise intensity and so forth. Therefore, further mechanism study about exercise and dementia is urgently needed in this area.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.45-50
• /
• 2016

This paper reports a Ringer's solution detector and transceiver design for the efficient management of patients. The ringer's solution detection and transceiver consisted of the main control part, ringer's solution detection part, display and warning light part, wireless transceiver, and power supply part. The light receiving part of the ringer's solution detection part employed TSL260R-LF photodiode; light permeating part, Water-Clear type LED; and wireless transceiver part, the RF wireless data transceiver module, NR-FPCX. As a result of this Ringer's solution detector and transceiver design that can manage the patient efficiently, it was found that when the ringer's solution was detected by the double photodiode, the operating frequency was 11.95kHz; when it was not detected, the number was 9.6kHz. In the ringer's solution receiver, when the ringer's solution was detected, the number was 0. The corresponding unique RF code was displayed when not detected. The power used in the ringer's solution detection part was converted to the Sleep mode to operate under battery save mode. The ringer's solution transceiver can exchange wireless communication approximately within a 700m radius.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.11
• /
• pp.393-402
• /
• 2014

We have experienced an explosive increase of the IoT(Internet of Things) technology based devices including smart phones and the wireless communications. Also the growing power consumption in IEEE 802.11 WLANs(Wireless LANs) driven by these dramatic increases in not only mobile users and but also wireless APs(Access Points). To reduce the power consumption, this paper proposes a wireless AP power saving algorithm, which minimizes the transmission power without decrease the transmission and carrier sense ranges. A wireless AP which is use in our algorithm checks its own original coverage periodically for whether there is a new STA(Station) or not when its transmission power is decreased. Moreover, if there are no signaling message to connect the wireless AP, it changes its operation mode Wake-up to sleep. A Result shows that the proposed AP algorithm can reduce the total power consumption of the wireless AP approximated 18% and 35% compared to the conventional wireless AP with and without the existing power saving algorithm, respectively.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2009

The sensor nodes that form a wireless sensor network must perform both routing and sensing roles, since each sensor node always has a regular energy drain. The majority of sensors being used in wireless sensor networks are either unmanned or operated in environments that make them difficult for humans to approach. Furthermore, since many wireless sensor networks contain large numbers of sensors, thus requiring the sensor nodes to be small in size and cheap in price, the amount of power that can be supplied to the nodes and their data processing capacity are both limited. In this paper, we proposes the WSN(Wireless Sensor Network) algorithm which is applied sensor node that has low power consumption and efficiency measurement. Moreover, the efficiency routing protocol is proposed in this paper. The proposed algorithm reduces power consumption of sensor node data communication. It has not researched in LEACH(Low-Energy Adaptive Clustering Hierarchy) routing protocol. As controlling the active/sleep mode based on the measured data by sensor node, the energy consumption is able to be managed. In the event, the data is transferred to the local cluster head already set. The other side, this algorithm send the data as dependent on the information such as initial and present energy, and the number of rounds that are transformed into cluster header and then transferred. In this situation, the assignment of each node to cluster head evenly is very important. We selected cluster head efficiently and uniformly distributed the energy to each cluster node through the proposed algorithm. Consequently, this caused the extension of the WSN life time.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2020

The thermal image device support image to detect infrared light from the object without light. It can use not only defence-related industry, but also civilian industry. This paper presents a new thermal image processing module using common image processor. The proposed module shows 10~20% performance improvement with normal mode and 50% performance improvement with sleep mode compared with the previously thermal image module based FPGA. and it guarantees high scalability according to modular system. In addition, the proposed module improves modulation and reuse, so it expect to have reduction of development period, low development cost. various application. In addition, it expect to have satisfaction of customer requirements, development design, development period, release date of product.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.20-27
• /
• 2011

A CMOS Image Sensor(CIS) mounted on mobile appliances always needs a low power consumption because of the battery life cycle. In this paper, we propose novel power reduction techniques such as a data flip-flop circuit with leakage current elimination, a low power single slope A/D converter with a novel comparator, and etc. Based on 0.13um CMOS process, the chip satisfies QVGA resolution($320{\times}240$ pixels) whose pitch is 2.25um and whose structure is 4-Tr active pixel sensor. From the experimental results, the ADC in the middle of CIS has a 10-b resolution, the operating speed of CIS is 16 frame/s, and the power dissipation is 25mW at 3.3V(Analog)/1.8V(Digital) power supply. When we compare the proposed CIS with conventional ones, the power consumption is reduced approximately by 22% in sleep mode, 20% in operating mode.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.675-687
• /
• 2010

Structural Health Monitoring (SHM) is the science and technology of monitoring and assessing the condition of aerospace, civil and mechanical infrastructures using a sensing system integrated into the structure. Impedance-based SHM measures impedance of a structure using a PZT (Lead Zirconate Titanate) patch. This paper presents a low-power wireless autonomous and active SHM node called Autonomous SHM Sensor 2 (ASN-2), which is based on the impedance method. In this study, we incorporated three methods to save power. First, entire data processing is performed on-board, which minimizes radio transmission time. Considering that the radio of a wireless sensor node consumes the highest power among all modules, reduction of the transmission time saves substantial power. Second, a rectangular pulse train is used to excite a PZT patch instead of a sinusoidal wave. This eliminates a digital-to-analog converter and reduces the memory space. Third, ASN-2 senses the phase of the response signal instead of the magnitude. Sensing the phase of the signal eliminates an analog-to-digital converter and Fast Fourier Transform operation, which not only saves power, but also enables us to use a low-end low-power processor. Our SHM sensor node ASN-2 is implemented using a TI MSP430 microcontroller evaluation board. A cluster of ASN-2 nodes forms a wireless network. Each node wakes up at a predetermined interval, such as once in four hours, performs an SHM operation, reports the result to the central node wirelessly, and returns to sleep. The power consumption of our ASN-2 is 0.15 mW during the inactive mode and 18 mW during the active mode. Each SHM operation takes about 13 seconds to consume 236 mJ. When our ASN-2 operates once in every four hours, it is estimated to run for about 2.5 years with two AAA-size batteries ignoring the internal battery leakage.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.121-124
• /
• 2005

The High Rate Wireless Personal Area Networks (WPAN) is mainly targeted to consumer electronics and portable communication devices which need high rates and QoS. To achieve these goals, the WPAN provides data rates up to 1Gbps and adopts a Time Division Multiple Access (TDMA) MAC protocol. Since IEEE 802.15.3 MAC is based on TDMA scheme, it has good performance in dealing with real traffics. But it does not give better results for dynamic traffic. For dynamic traffic, IEEE 802.15.3 MAC needs a kind of request and response policy that brings about the degradation of performance in order to adapt to network changes. To overcome this problem and enhance the data throughput, this paper proposes a superframe structure which uses the Enhanced Contention Access Period (ECAP) to transmit data during sleep-CTA in PM mode.