• ETRI Journal
• /
• v.32 no.4
• /
• pp.596-602
• /
• 2010

This paper proposes a computationally efficient learning-based super-resolution algorithm using k-means clustering. Conventional learning-based super-resolution requires a huge dictionary for reliable performance, which brings about a tremendous memory cost as well as a burdensome matching computation. In order to overcome this problem, the proposed algorithm significantly reduces the size of the trained dictionary by properly clustering similar patches at the learning phase. Experimental results show that the proposed algorithm provides superior visual quality to the conventional algorithms, while needing much less computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.85-92
• /
• 1986

Hangeul wordprocessor, workstation and I/O device for telematic service are requiring many kinds of characters with various attributes such as size and font. In this paper, we survey computer algorithm that have been studied to transform(reduction, enlargement) built-in character patterns into character patterns with different sizes. Also, evaluation cirteria for such algorithms are mentioned.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.21-24
• /
• 2008

In this paper, Designed Quadrature hybrid coupler apply Open-PI equivalent transmission line. Using the proposed structure we achieve significant size reduction with the same results of conventional quadrature hybrid coupler at 912MHz. The measured frequency responses agree well with simulated one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.583-591
• /
• 2009

OFDM(orthogonal frequency division multiplexing) signal with high PAPR(peak to average power ratio) produces the nonlinear distortion and/or decreases down the power efficiency of HPA(high power amplifier). So, the IMD(inter-modulation distortion) reduction method was proposed to reduce the nonlinear distortion, which shows better BER(bit error rate) performance than the PAPR reduction methods. However, IMD reduction method has inherent problem which system complexity and processing time increases because the FFT(fast Fourier transform) processor is added in transmitter and decision criterion of IMD reduction method is computed in frequency domain,. In this paper, therefore, we propose a new IMD reduction method to reduce the computational complexity and structure of IMD computation. And we apply this proposed method into OFDM system using PTS(partial transmit sequence) scheme and compare the computational complexity between conventional and proposed IMD reduction method. This method can reduce the system size and computational complexity. Also, the proposed has almost same BER performance with the conventional IMD reduction method.

• Korea Journal of Hospital Management
• /
• v.9 no.1
• /
• pp.46-65
• /
• 2004

The study was designed to investigate what effect of working time reduction which will be gradually expanded to corporate size from June, 2004 could give to medical industries, and to provide basic information for hospitals and government to prepare the policy. 276 hospitals were surveyed about medical service income and manpower realities during the first half of 2003, using a structured survey tool. Response rate was 8% and 20 hospitals were finally analyzed. The effect of working time reduction in hospital management was different to the size of hospitals and the alternative. Income to existing service income was decreased by $2.2{\sim}4.6%$ in tertiary hospitals, by $3.2{\sim}5.7%$ in general hospitals with more than 300 beds, and by $3.7{\sim}6.0%$ in general hospitals with less than 300 beds. In preparation against such decrease in income, government is required to raise insurance payment, to calculate added service charge for day-off on Saturday forenoon, to retain emergency care payment, to expand emergency care facilities, to secure duty doctors, and to support middle and small sized hospitals. Hospitals are required to give self improving efforts such as fortifying of weekday care, development of weekend care program, strengthening of care capacity and function of emergency care center, and making manpower operation efficient.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.214-224
• /
• 1990

A "two-fluid" model using thermal eddy diffusivity concept and Lumley's drag reduction theory, is proposed to analyze heat transfer of the turbulent dilute gas-particle flow in a vertical pipe with constant wall heat flux. The thermal eddy diffusivity is derived to be a function of the ratio of the heat capacity-density products .rho. over bar $C_{p}$ of the gaseous phase and the particulate phase and also of the ratio of thermal relaxation time scale to that of turbulence. The Lumley's theory dictates the variation of the viscous sublayer thickness depending on the particle loading ratio Z and the relative particle size $d_{p}$/D. At low loading ratio, the size of viscous sublayer thickness is important for suspension heat transfer, while at higher loading, the effect of the ratio .rho. $_{p}$ over bar $C_{p}$$_{p}$/ .rho. $_{f}$ over bar $C_{p}$$_{f}$ is dominant. The major cause of decrease in the suspension Nusselt number at lower loading ratio is found to be due to the increase of the viscous sublayer thickness caused by the suppression of turbulence near the wall by the presence of solid particles. Predicted Nusselt numbers using the present model are in satisfactory agreements with available experimental data both in pipe entrance and the fully developed regions.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.285-290
• /
• 2007

Ag nanoparticles were distributed onto polystyrene nanoparticle (PS-Ag) beads using two synthetic methodologies. In the first methodology, polystyrene (PS) beads were prepared via emulsion polymerization, with Ag nanoparticles subsequently loaded onto the surface of the PS beads. The polymerization of styrene was radiolytically induced in an ethanol (EtOH)/water medium, generating PS beads. Subsequently, Ag nanoparticles were loaded onto the PS beads via the reduction of Ag ions. The results from the morphological studies, using field emission transmission electron microscopy (FE-TEM), reveal the PS particles were spherical and nanosized, and the average size of the PS spherical particles decreased with increasing volume % of water in the polymerization medium. The size of the PS spherical particles increases with increasing radiation dose for the polymerization. Also, the amount of Ag nanoparticle loading could be increased by increasing the irradiation dose for the reduction of the Ag ions. In the second methodology, the polymerization of styrene and reduction of Ag ions were simultaneously performed by irradiating a solution containing styrene and Ag ions in an EtOH/water medium. Interestingly, the Ag nanoparticles were preferentially homogeneously distributed within the PS particles (not on the surface of the PS particles). Thus, Ag nanoparticles were distributed onto the surface of the PS particles using the first approach, but into the PS clusters of the particles via the second. The antimicrobial efficiency of a cloth coated with the Ag-PS composite nanoparticles was tested against bacteria, such as Staphylococcus aureus and Klebsiella pneumoniase, for 100 water washing cycles.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.83-91
• /
• 2006

Reduction kinetics and the behaviour of intermediate of three high explosives (HMX, RDX, and TNT) were studies in batch reactors using nano- or micro- size zero valent iron(nZVI or mZVI) as reducing agent. The kinetic constants normalized by the mass of iron ($k_M$) or by the surface area ($k_{SA}$) were measured and compared along with the changes in the concentrations of intermediates. Results showed that $k_M$ and $k_{SA}$ values were not suitable to fully explain the behaviour of mother compounds and reduced intermediates in the batch reactor. The concentrations of initial explosives degradation products, such as nitroso-RDXs, nitroso-HMXs, and hydroxylamino-TNTs, were higher in mZVI treated reactor than in nZVI treated reactor, whereas more reduced polar intermediates such as TAT were accumulated in the nZVI reactor. Therefore, a new parameter, which accounted for the intermediates reduction, needs to be developed.

• Journal of Powder Materials
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2010

The ultrafine titanium carbonitride ($TiC_xN_y$) particles below 100 nm in mean size, including various carbon and nitrogen contents (x=0.55~0.9, y=0.1~0.5), were successfully synthesized by new Mg-thermal reduction process. Nanostructured sub-stoichiometric titanium carbide ($TiC_x$) particles were initially produced by the magnesium reduction of gaseous $TiCl_4+x/2C_2Cl_4$ at $890^{\circ}C$ and post heat treatments in vacuum were performed for 2 hrs to remove residual magnesium and magnesium chloride mixed with $TiC_x$. Finally, well C/N-controled $TiC_xN_y$ phases were successfully produced by nitrification heat treatment under normal $N_2$ gas atmosphere at $1150^{\circ}C$ for 2 hrs. The values of purity, mean particle size and oxygen content of produced particles were about 99.3%, 100 nm and 0.2 wt.%, respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.89-99
• /
• 2014

The goal of this study was to evaluate sediment reduction effects of VFS (vegetative filter strip) applied for Iksan area in Saemangeum watershed. This study simulated runoff and sediment load from different types of uplands using VFSMOD-W. The general upland characteristics of the study area was investigated to build reasonable scenarios of the simulation. The simulation scenarios were designed by various areas, shapes, and slopes of uplands. Grass mixture was selected as VFS vegetation and the size of VFS was fixed as 10 % of uplands area. Additionally 50mm, 100mm, 150mm of daily rainfall were applied for the runoff and sediment simulation. As results, the calculated runoff and sediment loads were obtained $20.7{\sim}1,030.6m^3$ and 568.4~675,731.4 kg for the range of 0.1~1.0 ha of uplands with 7 % and 15 % slopes. The reduction effects on runoff and sediment were obtained 5~10 % and 21.0~47.7 % respectively from VFS applications. The VFSMOD-W simulations showed that runoff tended to increase as upland area and amount of rainfall increased while sediment increased when slope, length and area of uplands and amount of rainfall increased. These results indicated that rainfall amount and upland size are the critical factors for the generation of runoff and sediment load. In order to support this conclusion, further studies such as, long term monitoring, field experiments, and to calibrate and evaluate the model are necessary.