• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.491-497
• /
• 2011

This work describes a method for determining material parameters included in recrystallization and grain growth models of metallic materials. The focus is on the recrystallization and grain growth models of Ni-Fe based superalloy, Alloy 718. High temperature compression test data at different strain, strain rate and temperature conditions were chosen to determine the material parameters of the model. The critical strain and dynamically recrystallized grain size and fraction at various process conditions were generated from the microstructural analysis and strain-stress relationships of the compression tests. Also, isothermal heat treatments were utilized to fit the material constants included in the grain growth model. Verification of the determined material parameters is carried out by comparing the average grain size data obtained from other compression tests of the Alloy 718 specimens with the initial grain size of $59.5{\mu}m$.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.69-76
• /
• 2008

Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.37-45
• /
• 1999

Many automated welding equipment are used in the industry. However, there are some problems to get quality welds because of the geometric error, thermal distortion, and incorrect joint fit-up. These factors can make the gap between base plates in case of a thick plate welding. The welding product with the quality welds can not be obtained without consideration of the gap. In this paper, the robot path and welding conditions are modified to get the quality weld by detecting the position and size of the gap. In this work, a low-priced laser range sensor is used. The 3-dimensional information is obtained using the motion of a robot, which holds a laser range sensor. The position and size of the gap is calculated using signal processing of the measured 3-dimensional information of joint profile geometry. The data measured by a laser range sensor is segmented by an iterative end point method. The segmented data is optimized by the least square method. The existence of gap is detected by comparing the data with the segmented shape of template. The effects of robot measuring speed and gap size are also tested. The recognizability fo the gap is verified as good by comparing the real joint profile and the calculated joint profile using the signal processing.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.477-486
• /
• 2010

This study aims at establishing a sizing system required for producing ready-made clothes which can fit the body shape of disabled men using wheelchair. It measured the bodies of 178 adult men using wheelchair and compared the sizing system of German adult men using wheelchair (1984) with KS system(KS K0050, 2004) in order to establish standards of the sizing system. AS a result, in terms of classification of body shapes, KS system cover more types of disabled men's body shapes and especially, A types (Drop 15.6) showed the widest coverage with 32%. In classification of heights, the widest range of height was 170 cm, and Korean men's four sizes between 158 cm and 176 cm covers 88.2% of disabled men's body shape. For chest size, 91.1% of disabled men's chest sizes were included in seven sizes, which are 4 cm intervals between 88 cm and 112 cm with 100 cm standard. In consideration of the ranges of height and chest, the general sizes (A types; 11 sizes, B types; 3 sizes, Y types; 5 sizes) are selected to present the standardized measurements. Basic parts of the upper garment sizing system for disabled men using wheelchair were height-chest-waist size.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.284-291
• /
• 2014

Finely-striate buccinum Buccinum striatissimum, a species of whelks, is caught mainly by pot in the eastern coastal waters of Korea. In order to determine the size selectivity of pot for the species, comparative fishing experiments were conducted near Yeongil Bay from June to September in 2003 using the dome-shaped pots with different five mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm). The parameters of logistic equation were estimated by the SELECT (Share Each Length's Catch Total) method based on a multinomial distribution. The model with the estimated split parameter was found to fit the catch data best. The master selection curve was estimated to be s (R)=exp (13.044R-16.438)/[1 + exp (13.044R-16.438)], where R is the ratio of shell height to mesh size. The relative shell height of 50% retention was 1.260, and the selection range was 0.168. Enlargement in mesh size of the pot allows more small-sized whelks to escape.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.201-217
• /
• 2014

There is likely to be a fit problem when women aged in their 30s-40s purchase down-age clothing from brands that target women in their 20s. To identify the part of the lower body that causes the fit problem, the sizes and types of lower body of women in their 30s-40s were compared with those of women in their 20s. The data for this study was from the 2010 Size Korea survey of body measurements of 1675 female adults in their 20s-40s. To examine differences in the average sizes of the lower body between women in their 20s and 30s-40s, descriptive statistics and t-tests were conducted. Factor and cluster analysis were used to classify body types by age groups. On the whole, compared to women in their 30s-40s, women in their 20s were found to be higher for all height items and smaller for size, thickness and width items. The result of the Glycemic index analysis showed that the body type of women in their 20s was generally larger than that of women in their 30s-40s. In addition, women in their 20s had a large drop value compared to those in their 30s-40s, whereas flatness of body cross section was bigger in the group of women in their 30s-40s. Four factors related to the lower body type of female adults in their 20s-40s were identified in the factor analysis, and three categories of body type were identified by cluster analysis. A Type 1 individual had abdominal obesity and chubby lower limbs, Type 2 had short legs and slightly chubby lower limbs, and Type 3 had long legs and a skinny lower body. A significant number of women in their 30s-40s were included in the Type 1 group, which was the least common category for women in their 20s.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.115-122
• /
• 2005

As the digital TV markets rapidly growing, many manufacturers introduce large size flat screen TV units. There are two different display types available to large size models which are plasma and TFT-LCD. Since both are constructed with thin large panels that are mostly fragile to even moderate mechanical shock inputs. Some large size panels are severely resonated by the acoustic sound generated TV which deteriorates video quality. Recognizing the potential problems of large displays, accurate measurement of the panels is to be an essential task for the reliable design. Measurement of mechanical properties of a thin large crystallized panel such as TFT-LCD display with traditional material testing equipments is challenging. Since TFT-LCDs are constructed with combination of brittle glass panels, polymer sheets, and liquid crystal, their properties are not only anisotropic but also usually non-linear. Accurate measurement of the properties often requires very expensive facilities. Especially when the size of the test sample is as large as 40-inch or wider, direct measurement cost is prohibitive. Even worse, machining of the large TFT-LCD to make a smaller size specimen that could be fit into a material tester is not possible because of liquid crystal leakage. A new method fer the measurement of elastic modulus of large TFT-LCD panel is presented in this article. The suggested method provides a simple, economic, and user-friendly way fer measuring the elastic modulus of large panels with considerable level of accuracy.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• The Research Journal of the Costume Culture
• /
• v.20 no.2
• /
• pp.154-168
• /
• 2012

This study examined size combination suitability of the underwear sets in home shopping and discussed the degree of consumer satisfaction as well as purchase criteria and evaluation after purchase of women's underwear. The survey was conducted from 1st to 15th September 2010 on a total of 300 women aged between 20 to 50, living in Seoul and Gyeonggi-do region who had bought women's underwear through home shopping. The completed data, 245 out of 300, was used for the final analysis. The analysis conducted in the study with SPSS statistics package includes frequency analysis, reliability analysis, factor analysis, chi-square analysis, $t$-test, ANOVA and Duncan's Multiple Range test. Evaluation items on purchase criteria and evaluation after purchase were processed with factor analysis. The results of the present study showed that product differentiation strategies are required based on age in order to improve consumer satisfaction and repurchase intention in home shopping underwear. Moreover, most of underwear products sold in sets in home shopping are provided based on the brassiere size. As a result, women who do not fit into the home shopping underwear size combination may be less satisfied. When consumers choose their own brassier and briefs size or combinations of various brassier and briefs sizes, it would increase consumer satisfaction.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.226-236
• /
• 2021

The purpose of this study was to classify the torso shape based on abdominal protrusion caused by changes in the physical characteristics of middle-aged women. This study analyzed 3D shape data of 401 females ranging in age from 40 to 59 years who participated in the 6th Size Korea project. Based on the Size Korea 3D measurement standard, 27 additional items such as height, protrusion, and angle were measured in the 3D scan data. Nine factors were extracted from the analysis of constituent factors of the torso: "vertical size of torso," "flatness and protrusion of abdomen," "torso front extrusion," "upper body height," "bust size and flatness," "size of belly and angle of lower abdomen," "hip length," "hip flatness," and "horizontal size of bust." As a result of the cluster analysis using these nine factors, the torsos of middle-aged women were classified into three types. Type 1 has upper abdominal deposition with a small and long upper body and an advanced abdomen; type 2 has lower abdominal deposition with a small and short torso and a small belly and hip flexion; and type 3 has central abdominal deposition with a big and long torso, large breasts, and protruding abdo¬men front. The middle-aged women were mostly distributed in Type 2. The above results will be useful as basic data for the development of clothing with improved fit to accommodate the changed physical characteristics of middle-aged women.