• 디지털융복합연구
• /
• 제20권3호
• /
• pp.407-413
• /
• 2022

기존 의류 추천 시스템들은 사용자 자신의 신체 촬영 사진이나 신체 사이즈를 입력한 후, 사용자가 좋아하는 의류의 종류를 선택하면 그에 적합한 사진을 보여주는 수준에 머물러 있다. 이러한 추천 시스템을 이용하여 사용자가 의류를 구매할 경우, 사용자의 신체 사이즈에 맞지 않거나 어울리지 않는 경우가 다수 발생하게 된다. 본 연구에서는 기존 의류 추천 시스템들의 이런 문제점을 해결하기 위하여 사용자가 사이즈 뿐만 아니라 피부톤을 입력받아 사용자의 신체 사이즈 뿐만 아니라 피부톤에 알맞는 의류를 추천하는 시스템을 구현하였다. 본 시스템은 의류 추천을 위해 남성 상의 8가지를 대상으로 웹 크롤링을 통해 얻은 의류의 사이즈 정보를 주기적으로 데이터베이스에 저장하고, 해당 의류 이미지의 전체 픽셀을 분석하여 색감 텍스트 값을 추출하였다. 본 시스템의 성능을 확인하기 위하여 남자 대학생 100명을 대상으로 설문 조사를 실시하였으며, 70% 수준의 만족도를 보였다. 만족하지 않는 대부분의 이유는 추천 대상 의류가 한정되어 있다고 밝혀서 추후 대상 의류의 확대가 필요할 것으로 판단된다.

• 한국의류산업학회지
• /
• 제16권5호
• /
• pp.785-790
• /
• 2014

This study was performed to investigate purchasing practice and size satisfaction in order to establish marketing strategy and produce free-size clothes for the male and female in their 20s. Results were as follows; first, regarding the size selection method, it has been found that 71.5% of subjects answered that they buy clothes as a sales clerk chooses for them without knowing the old size name or notation. Second, 47.5% of subjects answered that free size is the size, which fits well to 55~66 size. Meanwhile, 36.1% answered that free size fits well to any body type; while 4% answered that free size fits well to 77 size. Third, regarding the clothes kind, which consumers buy most as free size, consumers buy shirts and sportswear by free size. Fourth, they were observed to purchase free-size clothes "free-size clothes what I want" and to not purchase clothes "due to the lack of right sizes." The size notation of clothes products is basic information, by which consumers can tell whether the clothes fit to self or not before the consumer would wear the clothes and confirm its fitness. Therefore, it is suggested that all clothes products would be manufactured by having KS clothes size as basic data and they would use standard size notation so that consumers would not have confusion. Standardized size notation by proper education and utilization on new KS notation method and attitude change of companies and consumers on size are suggested.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.587-597
• /
• 1998

In this study, the Periotest value was measured with Periotest to evaluate precision fit of the 2-unit and 3-unit implant-supported prosthesis by modifying the size and location of ill-fitted conditions. The 2-unit prosthesis was fabricated with the right implant fitted incorrectly and the 3-unit prosthesis with the right and center implant fitted incorrectly. To evaluate the effects of the ill-fitted sizes, 4 groups were divided.:The control group being the accurately fabricated sample group fitted properly. Group 1 was constructed with $40{\mu}m$ ill-fitted conditions, group 2 with $70{\mu}m$ and group 3 with $100{\mu}m$ ill-fitted conditions. The Periotest value was measured at each implant site after tightening 10Ncm. The result was follows : 1. The PTV on the ill-fitted area in the 2-unit implant-supported prosthesis increased as the ill-fitted conditions increased. There was a statistically significant difference among groups(p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05) 2. The PTV on the ill-fitted area of the 3-unit implant-supported with an ill-fitted condition in the right implant increased as the ill-fitted conditions increased. There was a significant difference among groups (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05). 3. In the 3-unit implant-supported prosthesis with ill fitting conditions in the center implant, the PTV on the ill-fitted area demonstrated a statistically significant difference between the control group, group 1 and group 2 (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated significant difference between the gap side and the adjacent side with over $70{\mu}m$ ill-fitted conditions (p<0.05). The results suggest that Periotest is a valuable objective method for evaluating the precision fit of an implant superstructure.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.182-188
• /
• 2014

For the dissemination of new and renewable energy, Korean government introduced a renewable portfolio standard (RPS) scheme in 2012 after terminating feed-in tariff (FIT) scheme that was introduced in 2004. With the RPS scheme, 64.7% of its own goal (95.7% in PV and 63.3% in non-PV) was achieved in 2012 and 67.2% of that (94.9% in PV, 65% in non-PV) was achieved in 2013. The deployment of PV systems met the goal very well and that of non-PV did not. Recently, Korean government revised the target year of supplying 10% electricity from new and renewable energy from 2022 to 2024 and released a couple of measures on PV area. Recent studies showed that the bankability of a project plays a key role for PV dissemination. Therefore, the dissemination should be assessed from the point of bankability under the RPS scheme and a little adjustment is necessary to achieve the goal. Especially, installing a small size PV (<100 kwp) system needs a minimum REC price or a FIT scheme. In non-PV area, permission process is a common bottleneck and the related regulation should be eased. In addition, to achieve the long term goal, an implementing scenario has to be prepared. Currently, the portion of the waste-gas energy originated from fossil fuel is too large among the new and renewable energy sources and the portion should be lowered or eliminated in the 10% of electricity supply goal. Seoul Metropolitan Government (SMG) has its own FIT scheme for PV dissemination from 2014 SMG and revised the PV tariff from 50 to 100 won/kwh in effective of 2015. It is worth to spread the other provinces.

• 복식문화연구
• /
• 제25권3호
• /
• pp.301-314
• /
• 2017

This study focused on the movement adaptability of $19^{th}$ century classical opera stage costumes. Researchers focused on a basic $19^{th}$ century women's jacket. The study analyzed movement adaptability using ROM (range-of-motion) tests of the upper limb flexion and abduction postures. It developed two research garments to mimic basic $19^{th}$ century style jackets with or without gussets at the axilla. The ROM experiment identified the gusset size as 11cm in length. Experimental postures included upper limb flexion and abduction. The study measured subjective comfort at 8 postures. These postures included the flexion and abduction of the arms and torso. Subjects also evaluated the subjective comfort of the rotation posture of the torso. Researchers evaluated the similarities between research garments' silhouettes and the $19^{th}$ century women's jacket. The study used a 3D virtual fitting system to evaluate fit, and specialists further analyzed fit with photographs and 3D virtual graphics. The results are as follows. The silhouettes of both research garments were similar to the silhouettes of the $19^{th}$ century western women's jacket. The jacket with axilla gusset had a better fit than the basic style jacket. The basic style jacket without the axilla gusset showed limited movement adaptability at the shoulder joint and it caused discomfort at the axilla and elbow. The 3D virtual fit test was not a suitable method for analyzing silhouette similarity.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.57-65
• /
• 2024

PURPOSE. The aim of this stuldy was to compare the clinical marginal fit of CAD-CAM inlays obtained from intraoral digital impression or addition silicone impression techniques. MATERIALS AND METHODS. The study included 31 inlays for prosthodontics purposes of 31 patients: 15 based on intraoral digital impressions (DI group); and 16 based on a conventional impression technique (CI group). Inlays included occlusal and a non-occlusal surface. Inlays were milled in ceramic. The inlay-teeth interface was replicated by placing each inlay in its corresponding uncemented clinical preparation and taking interface impressions with silicone material from occlusal and free surfaces. Interface analysis was made using white light confocal microscopy (WLCM) (scanning area: 694 × 510 ㎛²) from the impression samples. The gap size and the inlay overextension were measured from the microscopy topographies. For analytical purposes (i.e., 95-%-confidence intervals calculations and P-value calculations), the procedure REGRESS in SUDAAN was used to account for clustering (i.e., multiple measurements). For p-value calculation, the log transformation of the dependent variables was used to normalize the distributions. RESULTS. Marginal fit values for occlusal and free surfaces were affected by the type of impression. There were no differences between surfaces (occlusal vs. free). Gap obtained for DI group was 164 ± 84 ㎛ and that for CI group was 209 ± 104 ㎛, and there were statistical differences between them (p = .041). Mean overextension values were 60 ± 59 ㎛ for DI group and 67 ± 73 ㎛ for CI group, and there were no differences between then (p = .553). CONCLUSION. Digital impression achieved inlays with higher clinical marginal fit and performed better than the conventional silicone materials.

• 복식
• /
• 제56권4호
• /
• pp.15-32
• /
• 2006

The purpose of this study is to research on the actual condition of production and selling in silver apparel market. For the questionnaire, 19 women's wear brands which were in higher ranking of sales in boutiques and madame-zone of department stores were selected. Pattern makers of each brand were questioned about 40 items for this research. The results of the questionnaire were as follows: 1) According to the result of the survey on the made-to-wear production of 19 ready-to-wear manufacturers, there was the gap was in ages between the target and the real consumer. Consumers of these brands were older and aged more broadly than their target ages. 2) Most of the consumers of silver-zone has thick waists, common heights, fat shapes. Custom-made clothes are ordered in many cases because of the big abdomen(50.0%) and H-shape(58.3%) of a somatotype. The body size variation of user population is needed for a good fit. 3) All brands(100%) of this research are using KS standards in the label of clothing, but they don't use these data in their production by reason of unawareness and distrust about these data. These inconsistency between the label and the real size of products may cause a confusion when consumers buy ready-to-wear. 4) Silver apparel manufacturers have need of anthropometry information and dummy(78.6%) suitable for their target consumers to increase their satisfaction about their apparel fit.