• The Journal of Korean Physical Therapy
• /
• 제19권1호
• /
• pp.23-31
• /
• 2007

Purpose: As a preliminary study, the purpose of this study was to examine the indirect estimation of the lumbar intervertebral disc size by two anthropometric methods, in order to compare these indirect methods with the direct analysis by radiological imaging. Methods: The wrist, elbow, knee, and ankle joint (both right and left) diameters were measured in 52 volunteers, and then intervertebral disc size was calculated using two anthropometric methods (Colombini and modified Colombini). The data were analysed with independent t-test to assess clinical usefulness. Results: When using right and left joint diameter, there was no significant difference in the estimation value of the L4-5 and L5-S1 intervetebral disc sizes. However, the study has shown that male subjects have significantly larger L4-5 and L5-S1 intervertebral disc sizes, compared with those of female subjects. In addition, disc sizes calculated by Colombini's formula were significantly larger than modified Colombini's formula. Conclusion: The indirect estimation of the intervertebral disc size by anthropometric method can be considered as a clinically useful method. However, further study should be conducted to compare anthropometric values with other radiological imaging.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.63-67
• /
• 2014

페놀-포름알데히드를 이용하여 레졸형 구형 페놀수지 입자를 합성함에 있어 반응물의 조성이 입도분포, 수율 및 밀도에 미치는 영향을 확인하였다. 분산매의 양을 감소시킴에 따라 현탁액의 점도가 증가하며 이로 인해 입도분포의 변화 및 응집 현상의 원인이 됨을 확인하였고, 안정제의 양을 증가시킴에 따라 현탁입자의 표면적을 증가시키기 위해 평균입도가 감소하는 것을 확인하였다. 적정량 이상의 경화제의 사용은 입도분포 및 수율에는 영향을 미치지 않으나 형성된 입자 내부의 격렬한 경화반응으로 인해 발생하는 물분자의 탈출이 원활하지 않게 되어 밀도가 감소하는 것을 SEM 사진을 통해 확인하였다.

• 복식
• /
• 제60권4호
• /
• pp.98-112
• /
• 2010

This study is on the 18th-century man's clothing excavated from Mr. Kim(1683-1766)'s tomb in Cheongju, Chungbuk in 2003. There are more than 100 pieces of excavated costumes from the tomb of Won-taek Kim. The excavated costumes have the value of genuine materials. Among them, 36 garments in good condition were investigated. As a result, there are several kinds of the excavated coats with different sizes, depending on the type of coats-Simui(深衣), Danryeong(團領), Sagyusam(四揆衫), Daechang, jungchimak(中赤莫), and Sochangui. These different-size coats reveal the degree of ritual; the length of the ritual costume is longer than that of the daily one. We can see two kinds (large and small) of coats, jackets, and pants. The large-size clothing is for the dead, the small size one as daily clothing was used for filling the empty space of the coffin. Among the excavated clothing from Mr. Kim's tomb, clothing for the dead(shroud) is bigger than man's daily costume. Concerning the form, color, and materials of the costumes, clothing for the dead is similar to daily clothing, while there is the difference in their size. The oversized costumes of coats, jackets, and pants are also different in size, matching the structure of clothing.

• 산업경영시스템학회지
• /
• 제38권2호
• /
• pp.72-81
• /
• 2015

This paper studied the differences of the inventories asset turnover change ratio and several characteristics variable between large and small manufacturing firm group. Large and small firm group were determined based on number of labors and asset size. Several characteristics variable of firms such as assets size, sales growth rate, return on assets, leverage ratio, credit rating and age of firm were used to find out the differences of firm group. As a result, the inventory asset turnover change ratio of large firm was 5.16% and that of the middle and small firm was 9.3%. For the large firm, sales growth rate, ROA and credit rating affect inventory assets turnover change ratio. For the middle and small sized firm, Assets size, sales growth rate and credit rating affect inventory assets turnover change ratio. Using this result, we can say that manufacturing company need to consider their firm size and their characteristics to make their own operation strategy of inventory.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.321-327
• /
• 2019

Experimental isotherm compressive tests show that concrete behaviour is dependent on temperature. The aim of such tests is to reproduce how concrete will behave under environmental changes within a moderate range of temperature. In this paper, a novel constitutive elastic damage behaviour law is proposed based on a free energy with an apparent damage depending on temperature. The proposed constitutive behaviour leads to classical theory of thermo-elasticity at small strains. Fixed elastic mechanical characteristics and fixed evolution law of damage independent of temperature and the material volume element size are considered. This approach is applied to compressive tests. The model predicts compressive strength and secant modulus of elasticity decrease as temperature increases. A power scaling law is assumed for specific entropy as function of the specimen size which leads to a volume size effect on the stress-strain compressive behaviour. The proposed model reproduces theoretical and experimental results from literature for tempertaures ranging between $20^{\circ}C$ and $70^{\circ}C$. The effect of the difference in the coefficient of thermal expansion between the mortar and coarse aggregates is also considered which gives a better agreement with FIB recommendations. It is shown that this effect is of a second order in the considered moderate range of temperature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4326-4344
• /
• 2021

The SinGAN is one of generative adversarial networks that can be trained on a single nature image. It has poor ability to learn more global features from nature image, and losses much local detail information when it generates arbitrary size image sample. To solve the problem, a non-linear function is firstly proposed to control downsampling ratio that is ratio between the size of current image and the size of next downsampled image, to increase the ratio with increase of the number of downsampling. This makes the low-resolution images obtained by downsampling have higher proportion in all downsampled images. The low-resolution images usually contain much global information. Therefore, it can help the model to learn more global feature information from downsampled images. Secondly, the attention mechanism is introduced to the generative network to increase the weight of effective image information. This can make the network learn more local details. Besides, in order to make the output image more natural, the TVLoss function is introduced to the loss function of SinGAN, to reduce the difference between adjacent pixels and smear phenomenon for the output image. A large number of experimental results show that our proposed model has better performance than other methods in generating random samples with fixed size and arbitrary size, image harmonization and editing.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.511-516
• /
• 2023

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.95-103
• /
• 1999

콘크리트 원주형 공시체의 크기에 따른 압축강도의 감소현상은 많은 관심을 받아 왔으나, 지금까지도 이에 대해 제시된 모델식이 드문 실정이다. 기존의 연구결과에 의하면 콘크리트의 강도는 부재의 크기가 증가할수록 감소하며 그 파괴거동을 규명하기 위해서는 비선형 파괴역학 이론을 적용해야 함을 알 수 있다. 표준형 및 비표준형 공시체의 크기에 따른 압축강도의 변화를 파괴역학 이론에 따라 연구하고 실용적인 예측 모델식이 제시된 바 있지만 콘크리트의 강도수준에 따른 파괴메카니즘의 차이를 고려한 관계식은 전무한 상황이다. 따라서, 본 논문에서는 공시체의 크기와 h/d의 영향 및 콘크리트 압축강도수준을 고려하여 보다 일반화된 압축강도 예측 모델식을 제시한다.

• 한국의류학회지
• /
• 제33권11호
• /
• pp.1768-1773
• /
• 2009

This study determines the body size of preteen children and conducts questionnaire investigations into the awareness of real purchasers or parents of and satisfaction with children's clothes and fit, in order to provide the basic data for planning and setting up the size range for the preteens market in which the sales of children clothes are gradually increasing. The findings of this study are as follow: Analyzing the obesity of the children against the Rohrer index showed that almost 30% of the subjects were obese children and that it is necessary to research the sizes of the clothes for obese children. It was also found that older children selected a more appropriate clothe size. Investigations into the awareness of children on their body image found that there was a significant difference in the perception of body shape, body weight, shoulder breath, arm thickness, chest girt, waist girth, hip girth, and thigh thickness. Slim or standard type children had the greatest consideration for the length of clothes to purchase while obese children had the greatest consideration for bosom size and waist girth. However, in terms of the association between fitness and size selection, obese children did not select a bigger size but an appropriate one for their body. The findings show that it is imperative to develop appropriate size clothes for obese children.