• Particle and aerosol research
• /
• v.5 no.2
• /
• pp.45-52
• /
• 2009

Black carbon, which is a by-product of combustion of fossil fuel and biomass burning, is the component that imposes the largest uncertainty on quantifying aerosol climate effect. The direct, indirect and semi-direct climate effects of black carbon depend on its state of the mixing with other water-soluble aerosol components. The process that transforms hydrophobic externally mixed black carbon particles into hygroscopic internally mixed ones is called "aging". In most climate models, simple parameterizations for the aging time scale are used instead of solving detailed dynamics equations on the aging process due to the computation cost. In this study, a new parameterization for the black carbon aging time scale due to condensation and coagulation is presented as a function of the concentration of hygroscopic atmospheric components and the black carbon particle size. It is shown that the black carbon aging time scale due to condensation of sulfuric acid vapors varies to a large extent depending on the sulfuric acid concentration and the black carbon particle size. This result indicates that the constant aging time scale values suggested in the literature cannot be directly applied to a global scale modeling. The aging time scale due to coagulation with internally mixed aerosol particles shows an even stronger dependency on particle size, which implies that the use of a particle-size-independent aging time scale may lead to a large error when the aging is dominated by coagulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.1-6
• /
• 2018

Recently nano meter size pattern (sub-micro scale) can be machined mechanically using a diamond tool. Many studies have found a 'size effect' which referred to a specific cutting energy increase with the decrease in the uncut chip thickness at micro scale machining. A new analysis method was suggested in order to observe 'size effect' in nano scale machining and to verify the cause of the 'size effect' in this study. The diamond tool was indented to a vertical depth of 1,000nm depth in order to simplify the stress state and the normal force was measured continuously. The tip rounding was measured quantitatively by AFM. Based on the measurements and theoretical analysis, it was verified that the main cause of the 'size effect' in nano scale machining is geometrically necessary dislocations, one of the intrinsic material characteristics. st before tool failure.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.26-32
• /
• 2023

In this study, we attempted to analyze the status of meal nutritional management at daycare centers and determine whether the need for improvement varies depending on their size. We divided into two groups based on the size of foodservice facilities. If meals for more than 50 people are provided at a time, they are classified as large-scale facilities (Large-scale group). If they are smaller, they are classified as small-scale facilities (Small-scale group). Dietitians visited each daycare center and checked 5 categories and 14 items. When comparing 5 categories, scores in the Small-scale group scored higher than those in the Large-scale group for 'Menu utilization' category. As a result of comparing the detailed 14 items, the scores of 'Indicate dietary information', 'Use menus suitable for those who are eligible for meals', and 'Posting menus by age in public places at foodservice facilities' were higher in the Small-scale group than in the Large-scale group. As such, there are differences in meal nutritional management according to the size of children's foodservice facilities therefore, it was found that customized education and management were needed according to the facilities' size.

• Structural Engineering and Mechanics
• /
• v.70 no.4
• /
• pp.407-420
• /
• 2019

In the present work, an attempt is made to explore the effects of shear in-plane preload on the wave propagation response of small-scale plates containing nanofibers. The small-scale system is assumed to be embedded in an elastic matrix. The nonlocal elasticity is utilized in order to develop a size-dependent model of plates. The proposed plate model is able to describe both nanofiber effects and the influences of being at small-scales on the wave propagation response. The size-dependent differential equations are derived for motions along all directions. The size-dependent coupled equations are solved analytically to obtain the phase and group velocities of the small-scale plate under a shear in-plane preload. The effects of this shear preload in conjunction with nanofiber and size effects as well as the influences of the elastic matrix on the wave propagation response are analyzed in detail.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.386-392
• /
• 2008

The purpose of this study is to clarify playground types by characteristics of playground environment in child care facilities, to analyze the needs and estimation of users according to playground types. The subjects of this study were care-givers, who assist outdoor play activities of children and manage safety in playground, to estimate adequateness of playground's environment to children's outdoor plays and to report needs. The data were collected by field measurement survey for clarification playground environments in 21 child care facilities and structured-questionnaire for estimation and needs of 181 care-givers in them. The major results showed the following. 1) The playgrounds were clarified to five type according to number of child and size of playground. The five types include A-type as large-scale facility/small-size playground, B-type as small-scale facility/large-size playground, C-type as small-scale facility/small-size playground, D-type as middle-scale facility/large-size playground, and E-type as large-scale facility/large-size playground. 2) The adequateness of playground environment of D-type were estimate higher than others. C-type were estimated lower than other types in size and outdoor play areas organization of playground. 3) The care-givers in D-type and E-type wanted to install various play equipments, but the care-giver in C-type didn't wanted to install play equipment. 4) The various outdoor play areas were needed in D-type.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.445-452
• /
• 2018

In this paper the effects of particle size and model scale of concrete have been investigated on point load index, tensile strength, and the failure processes using a PFC2D numerical modeling study. Circular and semi-circular specimens of concrete were numerically modeled using the same particle size, 0.27 mm, but with different model diameters of 75 mm, 54 mm, 25 mm, and 12.5 mm. In addition, circular and semi-circular models with the diameter of 27 mm and particle sizes of 0.27 mm, 0.47 mm, 0.67 mm, 0.87 mm, 1.07 mm, and 1.27 mm were simulated to determine whether they can match the experimental observations from point load and Brazilian tests. The numerical modeling results show that the failure patterns are influenced by the model scale and particle size, as expected. Both Is(50) and Brazilian tensile strength values increased as the model diameter and particle sizes increased. The ratio of Brazilian tensile strength to Is(50) showed a reduction as the particle size increased but did not change with the increase in the model scale.

• Korean Journal of Cognitive Science
• /
• v.34 no.1
• /
• pp.39-66
• /
• 2023

New media moved the place of social exchange to the Internet, allowing large groups to communicate in one place beyond the limits of time and space. Recent studies have also reported cases in which human social abilities do not keep up with the expansion of group scale through social media. In this context, current study investigated how human perception of social information is affected by the expansion of the group scale in the context of majority bias. Using Internet-based task, the psychological processes that group ratio and group size are perceived and affect majority-biased social information use were investigated, and whether group scale moderates those processes was examined. The group ratio has a positive effect on the majority bias, and the relationship was partially mediated by ratio perception. Group scale did not moderate the relationship between group ratio and ratio perception. On the other hand, the correlation between group size and majority-biased social information use was not significant. Group scale moderates group size perception. The group size and size perception showed positive correlation under the smaller group scale condition. However under the extended group scale condition, the perceived group size became significantly lower and lost its correlation with group size. These results provide evidence that the psychological mechanism related to group size perception was not properly responding to the expansion of the group scale. Furthermore, the possibility of a specific psychological mechanism for processing group size information and the form of information input specifically accepted by majority bias were discussed from perspective of evolutionary psychology.

• Tribology and Lubricants
• /
• v.21 no.5
• /
• pp.209-215
• /
• 2005

Nano/micro friction with the contact area was studied on Si-wafer (100) and diamond-like carbon (DLC) film. Borosilicate balls of radii $0.32{\mu}m,\;0.5{\mu}m,\;1.25{\mu}m\;and\;2.5{\mu}m$ mounted on the top of AFM tip (NPS) were used for nano-scale contact and Soda Lime glass balls of radii 0.25mm, 0.5mm, 1mm were used for micro-scale contact. At nano-scale, the friction between ball and surface was measured with the applied normal load using an atomic force microscope (AFM), and at micro scale it was measured using ball-on flat type micro-tribotester. All the experiments were conducted at controlled conditions of temperature $(24\pm1^{\circ}C)$ and humidity $(45\pm5\%)$. Friction was measured as a function of applied normal load in the range of 0-160nN at nano scale and in the range of $1000{\mu}N,\; 1500{\mu}N,\;3000{\mu}N\;and\;4800{\mu}N$ at micro scale. Results showed that the friction at nano scale increased with the applied normal load and ball size for both kinds of samples. Similar behavior of friction with the applied normal load and ball size was observed for Si-wafer at micro scale. However, for DLC friction decreased with the ball size. This difference of in behavior of friction in DLC nano- and microscale was attribute to the difference in the operating mechanisms. The evidence of the operating mechanisms at micro-scale were observed using scanning electron microscope (SEM). At micro-scale, solid-solid adhesion was dominant in Silicon-wafer, while plowing in DLC. Contrary to the nano scale that shows almost a wear-less situation, wear was prominent at micro-scale. At nano- and micro-scale, effect of contact area on the friction was discussed with the different applied normal load and ball size.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1233-1240
• /
• 2005

As the geotechnical technologies have grown, the size of civil structures has become bigger than before, thereby requiring large-scale geotechnical testing equipments which can evaluate the mechanical behavior of large size testing materials such as gravel, crushed rock and so on. These kind of large testing equipments are usually used to evaluate the mechanical characteristics of large size material which are applied in the large infra structures like dam, seashore structure, coastal landfill, soil-structure interaction and seismic response of large-scale structure. In this research, state-of-the-art information in the field of geotechnical engineering was collected and summarized for such large-scale experimental equipments as large-scale geo-centrifuge, large-scale triaxial testing machine, large-scale direct shear testing apparatus and large-scale oedometer.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1905-1913
• /
• 2011

The dynamic characteristic of bogie that is driving system of railway vehicle is very important regarding decision of vehicle characteristics as running safety and comport. The dynamic characteristic test of bogie is tested on full size in place on field testing on track. But, the testing on the full size caused many problems. To overcome these problem by full size test, the Railway Safety Research Center in Seoul National University of Science & Technology developed 1/5 scale size of small scale derailment simulator and is currently testing running stability of 1/5 scaled bogie. Also To take effectively advantage of running stability test using small scale derailment simulator in actuality design and reliability estimation, it is necessary comparison and examination with field test and theoretical analysis result In this paper. to achieve running stability analysis of 1/5 scaled bogie on small scale derailment. the program using MATLAB that is fast compose and analysis the motion equation of Saemaul power bogie is developed. It is achieved analysis according to various specification (weight, size, suspension, etc..) and is evaluated corelation between test result and dynamic characteristic of actual railway vehicle.