• 제목/요약/키워드: size analysis

검색결과 17,492건 처리시간 0.08초

인간공학적 신발설계를 위한 노년여성 발측정치 분석 (Analysis on Foot Measurements of Elderly Women for Ergonomic Shoes Design)

  • 박순지;채혜선
    • 한국의류산업학회지
    • /
    • 제10권1호
    • /
    • pp.83-91
    • /
    • 2008
  • This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

입도분석에 기반한 Deep Neural Network를 이용한 최대 건조 단위중량 예측 모델 평가 (Evaluation of Maximum Dry Unit Weight Prediction Model Using Deep Neural Network Based on Particle Size Analysis)

  • 김명환
    • 한국농공학회논문집
    • /
    • 제65권3호
    • /
    • pp.15-28
    • /
    • 2023
  • The compaction properties of the soil change depending on the physical properties, and are also affected by crushing of the particles. Since the particle size distribution of soil affects the engineering properties of the soil, it is necessary to analyze the material properties to understand the compaction characteristics. In this study, the size of each sieve was classified into four in the particle size analysis as a material property, and the compaction characteristics were evaluated by multiple regression and maximum dry unit weight. As a result of maximum dry unit weight prediction, multiple regression analysis showed R2 of 0.70 or more, and DNN analysis showed R2 of 0.80 or more. The reliability of the prediction result analyzed by DNN was evaluated higher than that of multiple regression, and the analysis result of DNN-T showed improved prediction results by 1.87% than DNN. The prediction of maximum dry unit weight using particle size distribution seems to be applied to evaluate the compacting state by identifying the material characteristics of roads and embankments. In addition, the particle size distribution can be used as a parameter for predicting maximum dry unit weight, and it is expected to be of great help in terms of time and cost of applying it to the compaction state evaluation.

간호사의 감정노동과 관련된 변인의 메타분석 (A Meta-analysis of the Variables related to the Emotional Labor of Nurses)

  • 김신향;함연숙
    • 간호행정학회지
    • /
    • 제21권3호
    • /
    • pp.263-276
    • /
    • 2015
  • Purpose: The study was done to verify the effect size of the variables related to the emotional labor of nurses. Methods: A total of 47 article on variables related to the emotional labor of nurses and published from 2006 to 2014 were used for the meta-analysis. Results: Variables with the largest effect size related to emotional labor were identified as the variables of work task, organization and individual characteristics in descending order of effect size. The sub-factors with the greatest effect size in the work task variable were exhaustion and work commitment, while for organization variables, intention to change jobs had the largest effect size. For individual characteristics, physical symptoms had the largest effect size. Conclusion: The results of this study are meaningful as the first study to integrate research results on variables related to the emotional labor of Korean nurses, providing practical data for the management of emotional labor.

실시간 수질관리도구로서의 3차원 수질모형의 최적 격자크기 산정 (Plausible grid size for a real time decision making system based 3D water quality model)

  • 안기홍
    • 환경영향평가
    • /
    • 제20권4호
    • /
    • pp.575-583
    • /
    • 2011
  • In this study, the plausible grid size was estimated to increase for efficiency of reservoir management using 3 dimensional water quality model. To validate utilization of a real time water quality management tool, ELCOM-CAEDYM model was applied to Soyang reservoir in korea. 100m grid size can represent the real topography and take out exact analysis results. $400{\times}400m$ grid can be easily used to analysis because of data capacity. Consequently, the grid size of 200m or 300m was recommended to establish 3D model considering the required simulation time and the irrelevance between horizontal grid size and vertical distribution for temperature and turbidity analysis.

Particle Size and Shape Analysis : The Key to Success in Metal Powder Production

  • Pankewitz, Axel;Park, Yong-Jae
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.702-703
    • /
    • 2006
  • The particle size distribution and shape are among the important parameters for characterisation of quality of metal powders. Specific material properties such as ability to flow, reactivity as well as compressibility and its hardening potentials hence the most important characteristics of sintered metals - are determined by the size distribution and shape. The correct particle size distribution and particle shape information are the key to best product quality in atomisation processes of aluminium, milling of pure metals and other processes. This paper presents state-of-the-art technology for characterization of particle size distribution and shape.

  • PDF

입자크기분포 설정 및 멀티스레딩을 통한 소외사고영향분석 최적화 타당성 평가 (Feasibility Study on the Optimization of Offsite Consequence Analysis by Particle Size Distribution Setting and Multi-Threading)

  • 김승환;김성엽
    • 한국안전학회지
    • /
    • 제39권1호
    • /
    • pp.96-103
    • /
    • 2024
  • The demand for mass calculation of offsite consequence analysis to conduct exhaustive single-unit or multi-unit Level 3 PSA is increasing. In order to perform efficient offsite consequence analyses, the Korea Atomic Energy Research Institute is conducting model optimization studies to minimize the analysis time while maintaining the accuracy of the results. A previous study developed a model optimization method using efficient plume segmentation and verified its effectiveness. In this study, we investigated the possibility of optimizing the model through particle size distribution setting by checking the reduction in analysis time and deviation of the results. Our findings indicate that particle size distribution setting affects the results, but its effect on analysis time is insignificant. Therefore, it is advantageous to set the particle size distribution as fine as possible. Furthermore, we evaluated the effect of multithreading and confirmed its efficiency. Future optimization studies should be conducted on various input factors of offsite consequence analysis, such as spatial grid settings.

유아교사의 교사효능감과 직무만족의 상관관계에 대한 메타분석 (Meta Analysis of the Correlation between early Childhood Teachers' Teaching Efficacy and their Job Satisfaction)

  • 공은화
    • 한국콘텐츠학회논문지
    • /
    • 제16권1호
    • /
    • pp.391-402
    • /
    • 2016
  • 본 연구는 유아교사의 교사효능감과 직무만족의 상관관계를 고찰할 수 있는 연구방법인 메타분석(mata-analysis)의 방법으로, 유아교사의 교사효능감과 직무만족 간의 효과크기 및 두 변수의 하위변수 간 효과크기를 살펴보는 것을 연구목적으로 하였다. 이러한 연구목적을 위해 메타분석 전용 프로그램인 CMA(Comprehensive Meta Analysis) 2.0을 분석에 적용하였다. 분석결과, 유아교사의 교사효능감과 직무만족의 관계는 Cohen(1992)의 기준으로 중간 효과크기보다 높게 나타났다. 교사효능감 하위변수 중에서는 개인 교수효능감이 일반 교수효능감보다 직무만족의 관계에서 높은 효과크기를 보였으며, 직무만족의 하위변수 중에서는 직무자체 신념이 교사효능감의 관계에서 효과크기가 가장 높았다. 조절변수인 논문유형에서는 박사 학위논문이 효과크기가 높았으며, 출판연도와 표본 수는 메타회귀분석 결과, 통계적으로 유의하지 않았다. 이상의 분석결과를 기초로 하여 논의와 연구의 한계점을 제시하였다.

초등학교 일반교실의 규모계획에 관한 연구 (A study on the Size Planning of Unit Learning Space in Elementary School)

  • 김학래;박영기
    • KIEAE Journal
    • /
    • 제5권2호
    • /
    • pp.51-62
    • /
    • 2005
  • The purpose of this study is to calculate the size of unit space of the classroom in elementary school. The curriculum of Elementary school has changed since 1960. It has been reflected the architectural plan of classroom of the nationwide elementary school. However the Ministry of Education repealed the statute about the facilities of the schools on September in 1997 and the new education curriculum-the 7th curriculum-demands various activities in the classroom. So we need to another size of unit space of the classroom in elementary school because the size of unit space will affect the quality of education. This study represent that the size of unit plan is based on the size of human body, education curriculum, the number limit of classroom and teaching tools. It's generally known that a part of human body size has an invariable proportion with human's status. In this study, regression analysis is used to find out a part of the body-size of Korean. Through this analysis, status, age and weight remarkably relate with a part of human body-size. Then the size of unit plan of the classroom is calculated by the part of body-size and the type of desk arrangement.

Meta-Analysis on the Effect of Therapeutic Horseback Riding on Children with Developmental Disabilities and Neural Patients

  • Noh, Hyunju;Kim, Jiyoung;Park, Jiwon
    • The Journal of Korean Physical Therapy
    • /
    • 제32권5호
    • /
    • pp.312-318
    • /
    • 2020
  • Purpose: This study aimed to investigate the evidence that therapeutic horseback riding can improve balance, muscle, ADL, equivalenc, GMFM, gait, emotion with developmental disabilities and neural patients. Methods: To conduct meta-analysis, the search focused on studies that employed therapeutic horseback riding for developmental disabilities and neural patients for which eight databases (KIS, RISS, DBpia, National Assembly Library, Pubmed, Embase, Google scholar and Cochrane Library) were used to extract literature published from 2002 to September 2019. The data were analyzed the RevMan 3.5.3 program. Results: As a result of meta-analysis, therapeutic horseback riding total effect size is 0.552 for children with developmental disabilities and neural patients. And effect size result of according to assessment type variable first, balance effect size is 0.594. Second, muscle activities effect size is 0.425. Third, ADL effect size is 0.430. Fourth, equivalance effect size is 0.640. Fifth, GMFM effect size is 0.482. Sixth, gait effect size is 0.400 and seventh emotion effect size is 0.876. Conclusion: These findings is horseback riding is effective The effect size by outcome was observed to be the effective for children with developmental disabilities and neural patients. and also the horseback riding provided the positive effects of balance, muscle activities, ADL, equivalance, GMFM, gait, emotion for children with developmental disabilities and neural patients. It is hoped that this study will contribute to the development of effective treatments for children with developmental disabilities and neural patients therapeutic horseback riding and the development of study.

아동화 설계에 요구되는 치수 및 구조요인의 정량적 분석 -학령기 여아를 대상으로- (Quantitative Analysis of the Size and the Structural Factors of the Feet for Elementary School Girls' Shoe Design)

  • 전은경
    • 한국생활과학회지
    • /
    • 제15권4호
    • /
    • pp.651-658
    • /
    • 2006
  • This study was performed to provide the analysis on their size and the structural factors required in the process of design and manufacture of school girls' shoes. 371 elementary school girls in Kyungin and Youngnam area were participated in the size measurement. 25 foot items and 6 main body items were measured directly or indirectly using a digital photography. The results of the study are as follows: first, by most of measured items, the range of their foot size was very wide from the size of toddlers to adults'. That shows that the change of school girls' foot size occurred with their growth is pretty big. Second, from the structural factor analysis on 25 foot items, five factors were extracted such as 'the size of the foot', 'the volume of the foot,' 'the height and inclination of the foot,' 'the shape of the foot,' and 'the inside and outside inclination of the foot'. Third, from the cluster analysis, three clusters were classified: Cluster 1 was the group of 10 to 11 year old girls who had big-sized feet. The elementary school girls in the fourth to sixth grade belonged to this group. Cluster 2 consisted of girls who had small-sized and big-volumed feet. Cluster 3 had medium-sized and slim-shaped feet. Most of 6 to 7 year old elementary school girls belonged to this group. The above-mentioned results imply that many continual researches are required on children's shoe production reflecting the change of elementary school girls' feet size owing to their growth. The quantitative data on elementary school girls' feet size in this study could be used as basic information for the development of children's shoe design and its production.

  • PDF