• 제목/요약/키워드: sinusoidal wave

Search Result 298, Processing Time 0.028 seconds

제주도 동부 해안대수층의 수리특성 산정과 지하수위 예측 (Estimation of Hydraulic Characteristics and Prediction of Groundwater Level in the Eastern Coastal Aquifer of Jeju Island)

  • 조시범;전병칠;박은규;최광준;송성호;김기표
    • 한국환경과학회지
    • /
    • 제23권4호
    • /
    • pp.661-672
    • /
    • 2014
  • Due to tidal force, it is very difficult to estimate the hydraulic parameters of high permeable aquifer near coastal area in Jeju Island. Therefore, to eliminate the impact of tidal force from groundwater level and estimate the hydraulic properties, tidal response technique has been mainly studied. In this study we have extracted 38 tidal constituents from groundwater level and harmonic constants including frequency, amplitude, and phase of each constituent using T_TIDE subroutine which is used to estimate oceanic tidal constituents, and then we have estimated hydraulic diffusivity associated with amplitude attenuation factor(that is the ratio of groundwater level amplitude to sea level amplitude for each tidal constituent) and phase lag(that is phase difference between groundwater level and sea level for each constituent). Also using harmonic constants for each constituent, we made the sinusoidal wave and then we constructed the synthesized wave which linearly combined sinusoidal wave. Finally, we could get residuals(net groundwater level) which was excluded most of tidal influences by eliminating synthesized wave from raw groundwater level. As a result of comparing statistics for synthesized level and net groundwater level, we found that the statistics for net groundwater level was more insignificant than those of synthesized wave. Moreover, in case of coastal aquifer which the impact of tidal force is even more than those of other environmental factors such as rainfall and groundwater yield, it is possible to predict groundwater level using synthesized wave and regression analysis of residuals.

초음파를 이용한 두꺼운 복합재료의 보강섬유 굴곡 평가 (Nondestructive Evaluation of Fiber Waviness in Thick Composites by Ultrasonics)

  • 장필성;전흥재
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 1999년도 추계학술발표대회 논문집
    • /
    • pp.258-263
    • /
    • 1999
  • In this study, the numerical and experimental investigations were conducted to understand ultrasonic wave propagation and to evaluate the degree of fiber waviness in thick composites nondestructively. The path, energy and traveling time of insonified wave were predicted by adopting the ray and plane wave theories. In the analysis, the composites were assumed to have continuous fiber with sinusoidal waviness in a matrix and were modeled as stacks of infinitesimally short length off-axis elements with varying fiber orientation along the length direction. From the experiments on the specially fabricated thick composite specimens with various degrees of uniform fiber waviness, the energy distributions of received wave were obtain for the various positions of transmitter. It was observed that the energy of wave was converged to the adjacent peaks of fiber waviness. The location where maximum energy of wave was detected from the experiments showed good agreement with the location obtained from theoretical predictions. Finally, the test procedure was Proposed to evaluate fiber waviness in thick composites by considering the energy of wave and relative distance between transmitter and receiver.

  • PDF

온도차를 이용한 유도형 마이크로 EHD 펌프에 관한 연구 (A Study of Micro Induction-type EHD Pump with Temperature Gradient)

  • 윤용규;김용권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.1069-1071
    • /
    • 1993
  • This paper presents the characteristics of micro induction EHD(Electro Hydro Dynamic) pump in which the fluid has a temperature gradient to the transverse direction of a traveling wave. The effects of the channel depth, the wave length and wave form of the treveling wave has been investigated in micro pump. The effect of temperature gradient also has been investigated. The fluid velocity becomes large as the wave length becomes small and the temperature gradient becomes high. The channel depth has little influence on the fluid velocity. The EHD pump driven by the square wave has the larger fluid velocity than that driven by the sinusoidal wave.

  • PDF

다양한 진동하중의 액상화 시험을 통한 동적 과잉간극수압에 대한 상세분석 (Detailed Investigation on the Dynamic Excess Pore Water Pressure through Liquefaction Tests using Various Dynamic Loadings)

  • 최재순;장서용;김수일
    • 한국지진공학회논문집
    • /
    • 제11권2호
    • /
    • pp.81-94
    • /
    • 2007
  • 지진시 발생하는 지반 액상화 현상은 지진피해예측시 가장 중용하게 평가해야 하는 항목으로 실내에서 액상화 현상을 시뮬레이션하는 경우, 불규칙성의 지진을 제어하기 어려운 이유로 등가반복형태의 정현파 또는 쐐기파를 이용하는 것이 통상적이었다. 그러나, 90년대 이후 컴퓨터의 발달과 함께한 신호처리 및 제어기술의 급속한 발전은 동역학분야에서의 실험연구에 큰 도움을 주었으며 지반진동분야의 경우, 진동대 및 원심모형기와 같은 대형지진모의시험에서 실지진하중을 이용한 연구사례들이 증가되고 있는 실정이다. 국내에서도 실지진하중재하가 가능한 요소시험결과에 대한 연구사례가 발표되는 등 이에 관한 연구가 활발하게 진행되고 있으며 특히, 실지진하중 시험결과로부터 실지진하중하에서의 과잉간극수압의 변화가 정현하중시험에서의 결과와 큰 차이를 보이고 있다는 분석결과가 발표되어 현재까지 지반동역학분야에서 지진하중의 불규칙성을 크게 고려하지 않았던 통상적 가정사항들이 문제점으로 대두되어 관심을 집중시키고 있다. 본 연구에서는 등가의 정현파 및 쐐기파와 증가형태의 쐐기파, 그리고 실지진파 등 다양한 진동하중을 재하할 수 있는 삼축압축시험기를 이용하여 기존의 유효응력개념에서 사용하는 과잉간극수압관련 매개변수인 소성일, 전단소성 변형률 상각궤도, 그리고 액상화 상태전환선의 기울기를 비교분석하였으며 하중변화에 따른 토립자의 변형과 간극수압의 변화를 상세분석하였다. 연구결과, 토립자의 변형, 간극수의 동적흐름, 동적흐름 속도수두의 압력수두로의 전환, 그리고 과잉간극수압의 증가로 표현되는 새로운 개념의 액상화 발생이론을 제안하였으며 그 타당성 검토를 위해 과잉간극수압과 동적흐름의 압력수두(흐름속도의 제곱값)와의 상관관계를 비교하였다.

재질이 주기적으로 불균일한 보에서 전파하는 굽힘 탄성파 (Bending Waves Propagating in a Bar with Periodically Nonuniform Material Properties)

  • 김진오;문병환
    • 대한기계학회논문집A
    • /
    • 제24권8호
    • /
    • pp.1923-1930
    • /
    • 2000
  • A bar with periodically nonuniform material properties is selected as a one-dimensional model of a flat-panel speaker. This paper describes a theoretical approach to the bending waves propagating i n the nonuniform bar. The phase speed of the wave is obtained using perturbation techniques for small amplitude, sinusoidal modulation of the flexural rigidity and mass density. It is shown that the wave speed is decreased due to the nonuniformity of the material properties by the amount proportional to the square of the modulation amplitude. The resonance occurring when the wavelength is half of the period of the material properties is analyzed by the method of multiple scales. It is also shown that the wave speed at the resonance mode is decreased by the amount proportional to the modulation amplitude but the wave of this mode does not propagate far enough due to attenuation.

INTERACTION OF SURFACE WATER WAVES WITH SMALL BOTTOM UNDULATION ON A SEA-BED

  • Martha, S.C.;Bora, S.N.;Chakrabarti, A.
    • Journal of applied mathematics & informatics
    • /
    • 제27권5_6호
    • /
    • pp.1017-1031
    • /
    • 2009
  • The problem of interaction of surface water waves by small undulation at the bottom of a laterally unbounded sea is treated on the basis of linear water wave theory for both normal and oblique incidences. Perturbation analysis is employed to obtain the first order corrections to the reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom undulation. Fourier transform method and residue theorem are applied to obtain these coefficients. As an example, a patch of sinusoidal ripples is considered in both the cases as the shape function. The principal conclusion is that the reflection coefficient is oscillatory in the ratio of twice the surface wave number to the wave number of the ripples. In particular, there is a Bragg resonance between the surface waves and the ripples, which is associated with high reflection of incident wave energy. The theoretical observations are validated computationally.

  • PDF

신형식 다기능 조파기 설계 (On the Design of Novel Hybrid Wave Generator)

  • 김효철;오정근
    • 대한조선학회논문집
    • /
    • 제58권2호
    • /
    • pp.112-120
    • /
    • 2021
  • The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

영구자석 동기 전동기의 염가형 센서리스 제어회로 (A Low cost Sensorless Control Circuit for Permanent Magnet Synchronous Motor)

  • 양순배
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.434-438
    • /
    • 2000
  • In this paper the low cost sensorless control circuit for a PM synchronous motor without the mechanical rotor position sensors is presented. The sensorless control algorithm and position detection circuit for the sinusoidal current wave drive is more complex than that of the rectangular current wave drive. The proposed position sensing circuit is composed of an operational amplifier and several passive elements. The design procedures for getting the optimal parameters for the position sensing circuit are presented. The performance of the proposed algorithm is verified through the simulations and experiments.

  • PDF

VIENNA 정류기를 이용한 스위칭 컨버터의 입력 파형 개선 (Improvement of Switching Converter's Input Wave Using VIENNA Rectifier)

  • 정헌선;최재호;정교범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.201-204
    • /
    • 2007
  • This paper proposes a improvement of switching converter's input wave form using VIENNA Rectifier(three-phase three-switch three-level PWM Rectifier). VIENNA Rectifier is based on the combination of a three-phase diode bridge and dc/dc boost converter. It can be available to get sinusoidal mains current, and low-blocking voltage stress on rower transistors. In addition, it can control output voltage.

  • PDF

Propagation Speed of Torsional Waves in a Circular Rod with Harmonically Varying Material Properties

  • Kim, Jin-Oh
    • The Journal of the Acoustical Society of Korea
    • /
    • 제19권1E호
    • /
    • pp.43-47
    • /
    • 2000
  • The paper describes a theoretical study on the speed of torsional elastic waves propagating in a circular rod whose material properties vary periodically as harmonic functions of the axial coordinate. An approximate solution for the phase speed has been obtained by using the perturbation technique for sinusoidal modulation of small amplitude. This solution shows that the wave speed in the nonuniform rod is dependent on the wave frequency as well as the periodic variation of the material properties. It implies that the torsional waves considered in this paper are dispersive even in the fundamental mode.

  • PDF