• Wind and Structures
• /
• 제4권6호
• /
• pp.495-504
• /
• 2001

With a newly developed multi-force-balance system(MFB), a twin-tower structure was studied for its wind-induced responses. The MFB system allowed the twin towers, which were linked structurally, to be treated as a single structural system with its corresponding modes of vibration involving coupled motions of the two towers. The towers were also studied using a more conventional force balance approach in which each tower was treated as an isolated structure, i.e., as though no structural link existed. Comparison of the results reveals how the wind loads between the towers are redistributed through the structural links and the modal couplings. The results suggest that although the structural links usually have beneficial impacts on wind-induced response, they may also play a negative role if the frequency ratios of pair modes are near 1.0.

• 한국산업정보학회논문지
• /
• 제15권4호
• /
• pp.7-15
• /
• 2010

본 연구는 SC-FDMA(Single Carrier-Frequency Division Multiple Access) 접속기술을 사용하는 LTE(Long Term Evolution) 상향링크의 성능을 최대화하기 위한 무선자원관리(radio resource management) 기법을 제안한다. 셀간의 상호작용을 고려해야하는 다중셀(multi-cell) 시스템을 대상으로 하여 단일셀 대상의 기존 SC-FDMA관련 연구와는 차별화된다. 본 연구는 무선자원관리를 무선자원 계획단계(planning phase)와 운용단계(operation phase)로 구분하여 정의한다. 계획단계는 마스터 eBN(evolved-NodeB)가 소속된 eNB에 연속적인 무선자원(RB; radio bearer)를 배정하기 위한 것이고 운용단계는 eNB가 마스터 eBN로부터 배정받은 RB를 단말기에 할당하기 위한 것이다. 두 단계에 대하여 각각 최적화 문제를 모형화하고 각 모형에 대한 탐색적 해법을 제시한다. 제시하는 해법은 인접해중에서 목적함수 개선치가 가장 높은 방향으로 이동하는 일반적인 형태를 띄고 있다. 다수의 실험결과를 통하여 두 알고리즘의 성능과 특징을 분석하였다. 본 연구는 다중셀 SC-FDMA 시스템을 대상으로 효율적인 무선자원 관리 기법을 개발하기 위한 연구에 선구자적인 역할을 할 것으로 기대된다.

• 한국응급구조학회지
• /
• 제5권1호
• /
• pp.133-145
• /
• 2001

The scale of disasters is very large, also the influence of disasters is irreversible. Korean people has continuously learned how to deal with disaster management law. However, as time goes by after the many disaster, the concern with the disaster management by the people seems to become old and banal topic which nobody has interest in. If so, can it be said that our society is safe from the disaster? This study start from critical mind of asking this question. This study puts an emphasis on the problems such as following; To realize whole concept of disaster management provided in the basic civil defense law, the combined disaster management should be required to be established, the combined law should play a integral part for prevention for the disaster and should be a concrete basis of various laws for disaster management. Establishing a consolidated organization for disaster managing and united response organization is necessary. This consolidated organization is not temporary one such as civil disaster control headquarter but permanent one such as Disaster Management Office which controls an over all aspects of disaster management. Temporary organization should not be divided into natural calamity and man-made calamity but integrated one as a single control tower for all sorts of disasters. The police and army under fire fighting system should be reconsidered. It is necessary to make leadership system on the disaster place more substantial centered around present fire fighting system. To do so, more clear division of duty is required. The working condition should be improved so that all public servants in this agency can play their roles with pride and worth. The resource owned the existing administrative organization must be used by an appointment system. And to manage a large scale of disaster, it is necessary to have interorganizational network system which many specialized organization including volunteer group are integrated. And the natural disaster happen, many professionals and volunteers are distributed to the spots of disaster in the right man in the right place. Finally, citizen's consciousness about safety supervision needs to be recover.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2969-2973
• /
• 2014

A new process to fabricate a composite LSCF-Ag cathode material for SOFCs by electron beam (e-beam) irradiation process has been suggested for operation under intermediate temperature range of $600-700^{\circ}C$. A composite LSCF-Ag cathode with uniformly coated Ag nanoparticles on the surface of the LSCF material was prepared by a facile e-beam irradiation method at room temperature. The morphology of the composite LSCF-Ag material was analyzed using a TEM, FE-SEM, and EDS. The prepared composite LSCF-Ag material can play a significant role in increasing the electro-catalytic activities and reducing the operating temperature of SOFCs. The performance of a tubular single cell prepared using the composite LSCF-Ag cathode, YSZ electrolyte and a Ni/YSZ anode was evaluated at reduced operating temperature of $600-700^{\circ}C$. The micro-structure and chemical composition of the single cell were investigated using a FE-SEM and EDS.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.451-462
• /
• 2016

Photovoltaic energy conversion becomes main focus of many researches due to its promising potential as source for future electricity and has many advantages than the other alternative energy sources like wind, solar, ocean, biomass, geothermal etc. In Photovoltaic power generation multilevel inverters play a vital role in power conversion. The three different topologies, diode-clamped (neutral-point clamped) inverter, capacitor-clamped (flying capacitor) inverter and cascaded h-bridge multilevel inverter are widely used in these multilevel inverters. Among the three topologies, cascaded h-bridge multilevel inverter is more suitable for photovoltaic applications since each pv array can act as a separate dc source for each h-bridge module. This paper presents a single phase Cascaded H-bridge five level inverter for grid-connected photovoltaic application using sinusoidal pulse width modulation technique. This inverter output voltage waveform reduces the harmonics in the generated current and the filtering effort at the input. The control strategy allows the independent control of each dc-link voltages and tracks the maximum power point of PV strings. This topology can inject to the grid sinusoidal input currents with unity power factor and achieves low harmonic distortion. A PID control algorithm is implemented in Arm Processor LPC2148. The validity of the proposed inverter is verified through simulation and is implemented in a single phase 100W prototype. The results of hardware are compared with simulation results. The proposed system offers improved performance over conventional three level inverter in terms of THD.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.16-22
• /
• 2001

There is no doubt that agents play an increasingly predominant role in e-commerce, whether these are business-to-consumer or business-to-business applications. However most of the current e-commerce agents only support a single bid for a product at a fixed price. Although price is an important factor, it is not the only concern of both business and consumer. There is doubt as to whether such agents satisfv both parties. Negotiation on a variety of issues is needed in order to reach an agreement. In this paper, a computational agent negotiation(CAN) model is proposed to facilitate multiple-issue negotiation via an agent. The main contribution of the CAN model is it enables agent to participate actively in the negotiation with various feedback instead of simply an agreement or rejection.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.161-172
• /
• 2017

Foot mechanisms play the role of interface between the main body of robotic systems and the ground. Biomimetic design of the foot mechanism is proposed in the paper. Specifically, multi-chained and multiple contact characteristics of general foot mechanisms are analyzed and their advantages are highlighted in terms of impulse. Using Newton-Euler based closed-form external and internal impulse models, characteristics of multiple contact cases are investigated through landing simulation of an articulated leg model with three kinds of foot. It is shown that in comparison to single chain and less articulated linkage system, multi-chain and articulated linkage system has superior characteristic in terms of impulse absorption as well as stability after collision. The effectiveness of the simulation result is verified through comparison to the simulation result of a commercialized software.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.315-322
• /
• 2011

High-accuracy micropatterns such as V-shaped microgrooves are increasingly in demand for various engineering areas. And the technical trend goes for large surface areas in precision machining technology. So micropatterns with large surface areas are expected to play an increasingly important role in today's manufacturing technology In this study, we focused on developing machining technologies. First, a machine vision system for precise tool setting is developed. Second, an on-machine measurement (OMM) system for large-area measurement is implemented. And also software for tool path generation and simulation is developed. With these technologies we fabricated large-surface micropatterns in an electroless nickel-plated workpiece with single-crystal diamond tools and a 32-in, $675mm{\times}450mm$ mold with tens of V-and pyramid-shaped micropatterns.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.511-517
• /
• 2023

Pipelines play an important role in urban water supply and drainage, oil and gas transmission, etc. This paper presents a technique for pattern recognition of fiber optic vibration signals collected by a distributed vibration sensing (DVS) system using a deep learning residual network (ResNet). The optical fiber is laid on the pipeline, and the signal is collected by the DVS system and converted into a 64 × 64 single-channel grayscale image. The grayscale image is input into the ResNet to extract features, and finally the K-nearest-neighbors (KNN) algorithm is used to achieve the classification and recognition of pipeline damage.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.521-524
• /
• 2009

인터넷 환경의 급속하게 발전하면서 웹을 통하여 많은 학습 매체를 경험할 수 있다. 특히 영어 교육의 중요성이 강조되면서, 많은 영어 학습 관련 소프트웨어가 출시되었다. 그러나 기존 영어단어 교육용 시스템은 대부분 1명의 사용자가 게임을 진행하는 방식이며, 또한 'WIKIPEDIA'와 같은 신조어를 전혀 고려하지 못한다. 따라서 본 논문에서는 사용자에게 흥미와 즐거움을 유도하여 학습이 가능하도록 '스크레블'이라는 보드게임을 온라인으로 구현하였다. 제안하는 영어단어 교육용 게임시스템의 특징은 다음과 같다. 첫째, 제안하는 시스템은 인공지능을 바탕으로 한 가상의 사용자와 함께 단일 사용자 모드와 다중 사용자 모드를 모두 지원한다. 둘째, 제안하는 시스템은 NEVER 오픈 API사전을 이용하여 'WIKIPEDIA'와 같은 신조어에도 인식할 수 있다. 셋째, 매뉴얼 없이도 쉽게 게임을 즐길 수 있도록 사용자에게 익숙한 UI를 제공한다. 따라서 제안하는 시스템은 사용자에게 영어단어학습에 대한 흥미와 즐거움을 고취할 수 있다고 기대한다.