• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.8
• /
• pp.1153-1164
• /
• 2004

The purpose of this study was to knitted nine kinds of single knit and examined mechanical properties and hand to provide the fact that knit, tuck and miss stitch applied to various structure have an effect on hand of weft knitted fabrics. It was good to use tuck stitch rather than miss stitch to increase elasticity of knitted fabrics. As tuck stitch and miss stitch were double or triple overlaps, tensile resilence(RT) decreased by increase of friction contacted among stitch. As cross tuck stitch and cross miss stitch were knitted double or triple, bending rigidity(B), hysteresis of bending moment(2HB) and shearing(G) properties increased by jamming of stitch. As tuck stitch and miss stitch were overlap, thickness increased and they became thicker than miss stitch. Also, as they became thicker by these tuck stitch and miss stitch, compressional energy(WC) increased. It appeared that coefficient of friction(MIU) of cross tuck stitch was larger than coefficient of cross miss stitch. Mean deviation of surface roughness(SMD) had a tendency to be larger as tuck stitch and miss stitch increased. As cross tuck stitch and cross miss stitch were overlaps double or triple, KOSHI and FUKURAMI increased, total hand value(TIV) and NUMERI appeared high in double cross tuck stitch and double cross miss stitch.

• Korean journal of applied entomology
• /
• v.28 no.3
• /
• pp.146-153
• /
• 1989

These studies were conducted to investigate development of chemical resistance in two-spotted spider mite (Tetranychus urticae Koch) trough single selection for a given period of time with five acaricides including carbophenothion and ethion of organo-phosphate compound, dicofol of organo-chlorine compound, cyhexatin of organo-tin compound, biphenthrin of synthetic pyrethroid compound; and to examine cross-resistance among the acaricides to the selected populations. The development of chemical resistance of two-spotted spider mite was greatly varied under single selection of the each five acaricides. The carbophenothion- and the ethion-populations at the 22nd and the 24th selected generations showed 156- and 64.1-fold resistant levels, respectively, as compared with the susceptible population. However, the dicofol population at the 28th selected generation exhibited 39.7-fold resistant level, and the biphenthrin population at the 24th selected generation revealed 25.2-fold resistant level, while the cyhexatin population at the 20th selected generation showed 13-fold resistant level. The carbophenothion-selected population showed high cross-resistance to ethion, and low cross-resistance to dicofol and biphenthrin. The ethion-selected population revealed also high cross-resistance to carbophenothion. The dicofol-or the biphenthrin-selected populations, however, exhibited moderate cross-resistance to carbophenothion and ethion. Meantime, the cyhexatin-selected population showed high cross-resistance to ethion and carbophenothion.

• Corrosion Science and Technology
• /
• v.13 no.2
• /
• pp.62-69
• /
• 2014

A huge number of carbon steel piping components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the piping components. To manage the wall thinning degradation, most of utilities in the world predict the wall thinning rate based on the computational program such as CHECWORKS, COMSY, and BRT-CICERO, evaluate the UT (Ultrasonic Test) data, and determine next inspection timing, repair or replacement, if needed. There are several evaluation methods, such as band, blanket, and strip methods, commonly used for determining the wear of piping components from single UT inspection data. It has been identified that those single UT evaluation methods not only do not consider the manufacturing features of pipes, but also may exclude the data of the most thinned point when determining the representative wear rate of piping components. This paper describes a newly developed single UT evaluation method, E-Cross method, for solving above problems and introduces application examples for several pipes and elbows. It was identified that the E-Cross method using the length and width of UT data excluded the most thinned points appropriate as the single UT evaluation method for thinned piping components.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1118-1124
• /
• 2023

Experimental study on the fluidelastic instability (FEI) of a curved tube bundle in single phase downward cross flow is investigated for the design qualification and analysis input preparation of helical coiled steam generator tubing. A 6×9 normal square curved tube array with equal and different vertical/horizontal pitch-to-diameter ratio was under-tested up to 6 m/s in term of gap flow velocity to measure the critical velocity for FEI. The critical velocity for FEI was measured at the turning point from the vibration amplitude plot along the gap flow velocity. Our test results were compared with straight tube results and published data in the design guideline. The applicability of the current design guidelines to a curved tube bundle is also assessed. We found that introducing frequency difference in a curved tube array increases the critical velocity for fluidelastic instability.

• The Korean Journal of Applied Statistics
• /
• v.28 no.3
• /
• pp.529-540
• /
• 2015

A cross-over design is frequently used in clinical trials (especially in bioequivalence tests with a parametric method) for the comparison of two treatments. Missing values frequently take place in cross-over designs in the second period. Usually, subjects that have missing values are removed and analyzed. However, it can be unsuitable in clinical trials with a small sample size. In this paper, we compare single imputation methods in a $2{\times}2$ cross-over design when missing values exist in the second period. Additionally, parametric and nonparametric methods are compared after applying single imputation methods. A Monte-Carlo simulation study compares type I error and the power of methods.

• Ocean Systems Engineering
• /
• v.11 no.1
• /
• pp.43-58
• /
• 2021

In the present work, a 3D numerical model is proposed to study local scouring around single vertical piers with different cross-section shapes under steady-current flow. The model solves the flow field and sediment transport processes using a coupled approach. The flow field is obtained by solving the Unsteady Reynolds Averaged Navier-Stokes (URANS) equations in combination with the k-ω SST turbulence closure model and the sediment transport is considered using both bedload and suspended load models. The proposed model is validated against the empirical measurements of local scour around single vertical piers with circular, square, and diamond cross-section shapes obtained from the literature. The measurement of scour depth in equilibrium condition for the simulations reveal the differences of 4.6%, 6.7% and 13.1% from the experimental measurements for the circular, square, and diamond pier cases, respectively. The model displayed a remarkable performance in the prediction of scour around circular and square piers where horseshoe vortices (HSVs) have a leading impact on scour progression. On the other hand, the maximum deviation was found in the case of the diamond pier where HSVs are weak and have minimum impact on the formation of local scour. Overall, the results confirm that the prediction capability of the present model is almost independent of the strength of the formed HSVs and pier cross-section shapes.

• Asia Marketing Journal
• /
• v.17 no.4
• /
• pp.43-61
• /
• 2016

This paper has identified some theoretical reasons and empirical evidence for negative scores that occur in Japan and Korea or unstable NPS scores that can be experienced. A psychological analysis of NPS results sheds light on the validity of the negative NPS scores that are often found in Japan and Korea. Usually customer experience surveys utilize a "single stimulus" such as the "company" or the "company's products / services." However, in the case of the "recommendation to friend" question of the NPS system there are two stimuli namely the "company product/service" and the influence of "friends." Hence, the survey outcomes from this question can be very different when compared with other single stimulus questions such as "overall satisfaction" or "repurchase." Japanese and Korean people may have a positive attitude towards the company but they will provide low NPS scores because they are reflecting that they would not run the risk of ruining their relationships with their friends by making a recommendation. As a result, in the NPS system these people will be labeled as "detractors" when in fact they are "ambivalent customers." Using several Japanese and Korean based marketing research industry examples and case studies, different strategies are proposed to address the issue of negative scores in the NPS system in Japan and Korea. The Customers Psyche appears to be the key determinant factors for both types of behavioural items (items with a single stimulus as well as items with two stimuli).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1390-1393
• /
• 2005

The hardening model based on the dislocation mechanics is employed to study the experimentally observed high tensile elongations of NiAl along the [110] orientation at intermediate temperatures. In the hardening model proposed, a mobility of dislocation is assumed to be restricted to glide through the slip plane by forest dislocation and thermally activated cross-slip event. Overall deformation behavior of NiAl was greatly influenced by temperature-dependent dislocation mobility that both experimental and simulated yield stresses decreased as temperature increased. The results of simulation showed anomalous hardening behaviors analogous to those of experiment at certain circumstances. This behavior occurred due to the hardening contributions generated by cross-slip events that disable the dislocation motion in the primary slip systems. By comparing simulation results with experiments, it is confirmed that the proposed hardening model can represent anomalous tensile elongations due to the hardening by forest dislocations and cross-slip events.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.545-550
• /
• 2013

Piezoelectric PMN-29PT single crystal multilayer actuators [100 $mm^2$ in cross section and 22 mm in length] are designed and fabricated by stacking square plates [$10{\times}10{\times}0.5(t)\;mm^3$] of PMN-29PT single crystals having a $d_{33}$ of about 1,500 pC/N. The characteristics of PMN-29PT multilayer actuators are compared with those of P-025.40P multilayer PZT ceramic actuators [490 $mm^2$ in cross section and 60 mm in length] produced by PI in Germany. Even though the total volume of the PMN-29PT single crystal multilayer actuator is only about 7.5% of that of the P-025.40P ceramic multilayer actuator, PMN-29PT single crystal multilayer actuators are expected to show very similar properties to P-025.40P ceramic actuators in terms of static stroke and blocking force. Therefore, on the basis of their smaller mass and volume compared to the conventional PZT ceramic multilayer actuators, piezoelectric PMN-29PT single crystal multilayer actuators have significant potential regarding the development of various high performance actuators for aerospace subsystems.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.352-354
• /
• 2005

As further Studies on 4th generation mobile telecommunication are progressed, the importance of a Cross-Layer is being increased. However, it has focused on coordination model only between MAC layer and PHY layer. It is necessary to expand into II' layer and upper layers. In this paper, we introduce a Cross-layer optimization which can be used to transmit video data with effect by managing resources among layers. It can gives further more adaptive method to solve QoS model problem than single layer.