• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.49-55
• /
• 2007

The characteristics of auto-ignition and combustion process of a single droplet of emulsified fuel suspended in a high-temperature air chamber have been investigated experimentally with various droplet sizes, surrounding temperatures, and water contents. The used fuels was n-Decane and it was emulsified with varied water contents whose maximum is 30%. The high-speed camera has been adopted to measure the ignition delay and flame life time. It was also applied to observe micro-explosion behaviors. The increase of droplet size and chamber temperature cause the decrease of the ignition delay time and flame life-time. As the water contents increases, the ignition delay time increases and the micro-explosion behaviors are strengthened. The starting timings of micro-explosion and fuel puffing are compared for different droplet sizes and the amount of water contents.

• Journal of the Korean Society of Visualization
• /
• v.18 no.1
• /
• pp.38-43
• /
• 2020

This paper presents a new type of electrowetting driven tandem light deflector for high performance optical application. To steer an incident light, the proposed light deflector deforms the fluid interface using electrowetting actuation. The performance of the light deflector was experimentally verified by using a prototype of the proposed light deflector. Single and tandem light deflectors were separately prepared using microfabrication processes. The optical tests of the deflectors were conducted using a laser light. The proposed tandem light deflector obtained a 45° beam steering angle with a 5.3° deflection angle while a single light deflector was required for a 10.9° deflection angle to obtain the same beam steering angle. The proposed tandem light deflector with high optical capability can be applied to various optical applications from camera modules in mobile smart devices to advanced future optical systems.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.293-300
• /
• 2019

In this paper, an Embedded solution for fast navigation and precise positioning of mobile robots by floor features is introduced. Most of navigation systems tend to require high-performance computing unit and high quality sensor data. They can produce high accuracy navigation systems but have limited application due to their high cost. The introduced navigation system is designed to be a low cost solution for a wide range of applications such as toys, mobile service robots and education. The key design idea of the system is a simple localization approach using line features of the floor and delayed localization strategy using topological map. It differs from typical navigation approaches which usually use Simultaneous Localization and Mapping (SLAM) technique with high latency localization. This navigation system is implemented on single board Raspberry Pi B+ computer which has 1.4 GHz processor and Redone mobile robot which has maximum speed of 1.1 m/s.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4080-4092
• /
• 2021

In this study, the performance of sequence tracking methods for multiple interaction events in specific CdZnTe Compton imagers was evaluated using Monte Carlo simulations. The Compton imager consisted of a 6 × 6 array of virtual Frisch-grid CZT crystals, where the dimensions of each crystal were 5 × 5 × 12 mm³. The sequence tracking methods for another Compton imager that consists of two identical CZT crystals arrays were also evaluated. When 662 keV radiation was incident on the detectors, the percentages of the correct sequences determined by the simple comparison and deterministic methods for two sequential interactions were identical (~80%), while those evaluated using the minimum squared difference method (55-59%) and Three Compton method (45-55%) for three sequential interactions, differed from each other. The reconstructed images of a 662 keV point source detected using single and double arrays were evaluated based on their angular resolution and signal-to-noise ratio, and the results showed that the double arrays outperformed single arrays.

• Journal of ILASS-Korea
• /
• v.26 no.3
• /
• pp.142-148
• /
• 2021

The objective of this study is to analyze the basic flame behavior characteristics using the single fuel droplet combustion of diesel, palm-based biodiesel, and canola-based biodiesel. The results were compared and analyzed through the post processed image, which was applied the threshold level for removing noise in the raw image. The raw image was taken by a high-speed camera during the entire combustion process. At the same time, the maximum flame length, which was measured by the application code of the MATLAB program, the ignition delay, and the combustion period were compared and analyzed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.7 s.262
• /
• pp.808-815
• /
• 2007

The optical performance of the mirror fur satellite camera is highly dependent on the adhesive properties between the mirror and its support. Therefore, in order to design a mirror with high optical performance, the mechanical properties of adhesives should be well defined. In this research, the mechanical properties of three kinds of space adhesives are studied. In case of the materials which show nearly incompressible behavior such as space adhesives, it is important to measure shear modulus which governs deviatoric stress components. Also the experiment should be performed in circumstances similar to real manufacturing process of mirror, because extra factors such as size effects, the adhesion effects of primer and reactions between adhesive and primer affect the properties of adhesive regions. In this research shear moduli of the adhesives are determined by using a single lap adhesively bonded joint. For the shear tests, several temperatures have been selected from $-20^{\circ}C$ to $55^{\circ}C$ which is operating temperature range of the adhesive. In the case of linear behavior materials, shear moduli are calculated through a linear curve fitting. Shear stress-strain relation is obtained by using an exponential curve fitting for material which shows non-linear behavior. The shear modulus of each adhesive is expressed as a function of temperature. Characteristics and adaptability of the adhesives are discussed regarding their temperature sensitivity.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.98-106
• /
• 2013

In this paper, we propose a moving object detection and tracking method for multi-view camera environment. Based on the similarity and characteristics of motion vectors and coding block modes extracted from compressed bitstreams, validation of moving blocks, labeling of the validated blocks, and merging of neighboring blobs are performed. To continuously track objects for temporary stop, crossing, and overlapping events, a window based object updating algorithm is proposed for single- and multi-view environments. Object detection and tracking could be performed with an acceptable level of performance without decoding of video bitstreams for normal, temporary stop, crossing, and overlapping cases. The rates of detection and tracking are over 89% and 84% in multi-view environment, respectively. The rates for multi-view environment are improved by 6% and 7% compared to those of single-view environment.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.40-47
• /
• 2013

In case of wild fire, early detection of wild fire is the most important factor in minimizing the damages. In this paper, we suggest an effective system that detects wild fire using a panoramic image from a single camera with PAN/TILT head. This enables the system to detect the size and the location of the fire in the early stages. After converting RGB image input to color YCrCb image, the differential image is used to detect changes in movement of the smoke to determine the regions which may be prone to forest fire. Histogram analysis of fire flame is used to determine the possibility of fire in the predetermined regions. In addition, image matching and SURF were used to create the panoramic image. There are many advantages in this system. First of all, it is very economical because this system needs only a single camera and a monitor. Second, it shows the live image of wide view through panoramic image. Third, this system can reduce the quantity of saved data by storing panoramic images.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.457-464
• /
• 2014

Recently, interests in space information data are increasing due to the initiation of spatial information open platform service by the Ministry of Land, Infrastructure and Transport. The purpose of this study is optimizing management and storing of the texture data, one kinds of 3D-spatial data. First, extract 3D-spatial data through the aerial triangulation and 3D-writing using raw image taken with the Multi-directional aerial camera and the vertical aerial camera. And develop the method to create single texture data and related technique by align and place corresponding 3D-spatial data to optimal storage space. Through experiment, the results show effect of 8 times of storage capacity reduction compared to existing single-file storage method, additionally, new method can improve file management efficiency in comparison with multiple file storage method. The results of this study can be cornerstone of three-dimensional space information management when dealing with bulk data, and utilizations will be enhanced through the further studies and algorithm improvement.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.92-101
• /
• 2011

However, in order to create a stereoscopic 3D image, independently, it is required to spend expensive manufacturing costs and to have special techniques. As 3D display devices have been generalized, there is an increasing need for implementing a stereoscopic 3D image without a burden of expensive costs. This paper proposes some methods to implement stereoscopic 3D images easily by utilizing a marker tracking technology using a single camera. In addition, the study made it possible for the resolution of an image to be adjustable dynamically. This paper will be committed to the promotion of the field of UCC (User Created Contents) using stereoscopic 3D images by attracting the active participation of general users in the field of the implementation of stereoscopic 3D images.