• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.6
• /
• pp.605-615
• /
• 2003

In practice, it is common to manufacture reference blocks containing simple reflectors to obtain distance-amplitude correction (DAC) curves. However, the construction or DAC curves in this manner requires the use of a large number of specimens with appropriate curvatures and reference reflectors located at various depths. Therefore, less costly and quantitative procedures are strongly needed. To address such a need, in this study, we have developed model-based transfer curves to relate a DAC curve obtained in a particular reference configuration with that for a completely different configuration. An example of transferring DAC curves, using the proposed transfer curves, is given.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.506-514
• /
• 2010

Defense systems are needed to prevent catastrophic failures of a power grid due to cascaded events. Cascaded events can be occurred by power flow overload. Especially, it is the most dangerous problem that overload line is outage, because it can make the power system face danger of cascaded. In this paper, vulnerability evaluation for monitoring wide are outage is proposed using by configuration information of transmission systems. This method of vulnerability evaluation is considered direct effect and indirect effect of power flow, especially overload. What is more, it can be used when the configuration of power system changes, as simple fault occurs or maintenance of facility. In the case studies, the estimation and simulation network have been testified and analysed in PSSE and C programming.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1595-1600
• /
• 2007

It is necessary a simple helicopter design and performance analysis program for a stage of helicopter conceptual design. To meet that needs, we have developed a program which is simply used to estimate helicopter configuration and performance. The program developed by this study is composed of Requirement, Mission profile Analysis, Size, Aerodynamic, Trim, Propulsion, Weight, and Performance modules, and each modules carry out operations for a given flight condition. In this study, we validate this analysis program in 9,500 1bs and 22,000 1bs helicopters and estimate design configuration and performance of 16,000 1b helicopter. And We can use this program to optimization process for Helicopter MDO framework.

• Journal of Biomedical Engineering Research
• /
• v.13 no.4
• /
• pp.353-362
• /
• 1992

The stress distribution of bone is altered by the rigid bone plate, sometimes resulting in unfavorable osteoporosis. The rigidity and the biocompatibility are important factors for the design of prosthesis. However, it is also necessary to consider the effect on the bone remodeling. In this paper, it is attempted to establish an approximate and simple method to predict the trend of the configuration of surface bone remodeling for the case of a bone plate using stress analysis. Thus, three dimensional finite element model of plated-human femur is generated and simulated. In addition. the stress difference method (SDM) is introduced and attempted to demonstrate the configuration of surface bone remodeling of the plated-human femur. The results are compared with those of invivo tests and the feasibility of the stress difference method is discussed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.145-150
• /
• 2013

A novel AC to DC PWM converters with unity input power factor are proposed to overcome the above shortcoming. The main function of these converters is to shape the input line current to force it exactly in phase with the input AC voltage. Therefore, the input power factor can be improved to near unity and the input current harmonics can be eliminated. In this paper, half-bridge converter with two active switches and two diodes are utilized for low-cost type UPS configuration. By having only two semiconductors in the current path at any time, losses can be reduced over the conventional boost topology. Also, this converter provides controllable dc-link voltage, high power factor, and low cost type converter by simple power circuits. Simulation results show that the proposed half-bridge converter/inverter control technique can be applied to single-phase low-cost type UPS systems successfully.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.296-303
• /
• 2006

Recently, micro hydropower attracts attention because of its clean. renewable and abundant energy resources to develop. However, suitable turbine type is not normalized yet in the range of micro hydropower and it is necessary to study for the effective turbine type. Moreover, relatively high manufacturing cost by the complex structure of the turbine is the highest barrier for developing the micro hydropower turbine. Therefore a cross-flow turbine is proposed for micro-hydropower in this study because of its simple structure and high possibility of applying to low head. The purpose of this study Is to further optimize the turbine structure and improve the performance. A guide vane is removed and the runner chamber is made compact using a new air supply method. The results show that the efficiency of the turbine is improved in a wide operating range and the size of the turbine is remarkably reduced.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2006

This study is investigates space syntax theory, developed by Bill Hiller, used for physical analysis and visual access of space and role of spatial configuration based on social logic. it mean computer program analyze physical structure of space and represent by mathematical logic. it used for predict space use and Descriptive of spatial configuration. This method and theory is incompletion for design, but it enough useful tool for architecture and urban design and will be improved. And development of a simple computer program - SSA(Sspace Syntax Analysis) for space syntax analysis and study. SSA is based on convex map analysis and using VISIO software for easily using and development.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.64-69
• /
• 2013

For power system protection, the distance relay settings are important. Apparent factor is a necessary parameter in distance relay settings. Apparent factors have to be calculated when setting the distance relays and doing the resetting in case of configuration change in power system. The problem is that the current method to calculate apparent factor requires tools and plenty of time to do fault analysis and this method is complex especially in case of configuration change. Therefore this paper proposes a fast algorithm to calculate apparent factor without the fault analysis. Test results prove that this algorithm is simple and accurate by simulation.

• Computers and Concrete
• /
• v.19 no.4
• /
• pp.405-411
• /
• 2017

Carbon Fiber Reinforced Plastic (CFRP) has commonly been used to strengthen existing RC structures. Wrapping the whole component with CFRP is an effective method and simple to execute. Besides, specific configuration of CFRP sheets (L, X and T shape) has also been considered in some experiments to examine CFRP effects in advance. This study aimed to provide an optimal CFRP configuration to effectively retrofit the beam-column connection using continuous material topology optimization procedure. In addition, Moved and Regularized Heaviside Functions and penalization factors were also considered. Furthermore, a multi-material procedure was also used to compare with the results from the single material procedure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.514-514
• /
• 2000

In this article, the realization of a precision full-wave rectifier circuit for analog signal processing, which operates throughout in the current domain, is presented. The circuit makes use of a MOS class B/AB configuration, and provides a wide dynamic range and wide-band capability. The rectifier has a simple circuit configuration and is suitable for implementing in CMOS integrated circuit form as versatile building block. The characteristic of the circuit exhibits a low distortion en the output signal at low level input signal. PSPICE simulation results demonstrating the characteristic of the proposed circuit are included.