• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.419-426
• /
• 2018

An useful and effective design method for the gas identification system is presented in this paper. The proposed gas identification system adopts hierarchical structure with two level rule base combining fuzzy sets with rough sets. At first, a hybrid genetic algorithm is used in grouping the array sensors of which the measured patterns are similar in order to reduce the dimensionality of patterns to be analyzed and to make rule construction easy and simple. Next, for low level identification, fuzzy inference systems for each divided group are designed by using TSK fuzzy rule, which allow handling the drift and the uncertainty of sensor data effectively. Finally, rough set theory is applied to derive the identification rules at high level which reflect the identification characteristics of each divided group. Thus, the proposed method is able to accomplish effectively dimensionality reduction as well as accurate gas identification. In simulation, we demonstrated the effectiveness of the proposed methods by identifying five types of gases.

• Steel and Composite Structures
• /
• v.25 no.3
• /
• pp.287-298
• /
• 2017

The present study aims to determine the structural response of full scaled rectangular columns under both of vertical and lateral loads using numerical methods. In the study, the composite columns considering full concrete filled circular steel tube (FCFRST) and concrete filled double-skin rectangular steel tube (CFDSRST) section types are numerically modelled using ANSYS software. Vertical and lateral loads are applied to models to assess the structural response of the composite elements. Also similar investigations are done for reinforced concrete rectangular (RCR) columns to compare the results with those of composite elements. The analyses of the systems are statically performed for both linear and nonlinear materials. In linear static analyses, both of vertical and lateral loads are applied to models as only one step. However in nonlinear analyses, while vertical loads are applied to model as only one step, lateral loads are applied to systems as step by step. The displacement and stress changes in some critical nodes and sections and contour diagrams are reported by graphs and figures. At the end of the study, it is demonstrated that the nonlinear models reveal more accurate result then those of linear models. Also, it is highlighted that composite columns provide more and more safety, ductility compared to reinforced concrete column.

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.555-563
• /
• 2000

The study was conducted to evaluate the adsorption equilibrium of heavy metals on bone charcoal made of livestock bone which was sintered at $550{\sim}600^{\circ}C$. Analysis of bone charcoal by XRD and FT-IR showed that crystal structure was similar to that of synthetic hydroxyapatite. Adsorption equilibrium capacity of single component (Pb, Cd, and Zn) on bone charcoal could be expressed as Langmuir, Freundlich, and Sips equations. Sips isotherm was best among the three isotherms. The values predicted by IAST(ideal adsorbed solution theory) showed good relationship to the experimental data in multicomponent adsorption equilibrium. Adsorption affinity was in order of Pb, Cd, and Zn. The order was same in case of activated carbon or synthetic hydroxyapatite. Through the study results. it would be expected that bone charcoal made of livestock could be used in field of wastewater treatment plants as adsorbent to remove heavy metal.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1141-1148
• /
• 2008

One of the methods to increase the efficiency of an engine is to expand pressures obtained from combustions equal to the pressure of atmosphere as much as possible and then convert thermal energy into mechanical energy also as much as possible. In this research, the Diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting Diesel engines to the Atkinson cycle, and general cycle features were analyzed after comparing these two cycles. In the case of fuel air the Diesel-Atkinson cycle considering intake and exhaust similar to real cycles, the value of thermal efficiency and average effective pressure increased, though their values were smaller than those of standard air amount cycle, when expansion compression ratio increased. When normal Diesel engines of which compression stroke and expansion stroke are all the same, was converted to the Atkinson cycle by changing the time of intake value close, combustion pressure reduced due to reduced expansion compression ratio and intake air amount due to decreased effective cycle volume.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.4
• /
• pp.33-40
• /
• 1983

The drift force acting on a freely-floating sphere in water of finite depth is studied within the framework of a linear potential theory. A velocity potential describing fluid motion is determined by distribution pulsating sources and dipoles on the immersed surface of the sphere. Upon knowing values of the potential, hydrodynamic forces are evaluated by integrating pressures over the immersed surface of the sphere. The motion response of the sphere in water of finite depth is obtained by solving the equation of motion. From these results, the drift force on the sphere is evaluated by the momentum theorem, in which a far-field velocity potential is utilized in forms of Kochin function. The drift force coefficient Cdr of a fixed sphere increases monotononically with non-dimensional wave frequency ${\sigma}a$. On the other hand, in freely-floating case, the Cdr has a peak value at ${\sigma}a$ of heave resonance. The magnitude of the drift force coefficient Cdr in the case of finite depth is different form that for deep water, but the general tendency seems to be similar in both cases. It is to note that Cdr is greater than 1.0 when non-dimensional water depth d/a is 1.5 in the case of freely-floating sphere.

• Journal for History of Mathematics
• /
• v.18 no.2
• /
• pp.107-116
• /
• 2005

A suspension bridge is an example of a nonlinear dynamical system, especially systems with the so called jumping nonlinearity. The fact that we deal with a serious and topical problem is demonstrated for example by the collapse of the Tacoma Narrow suspension bridge. So it would be very contributive to determine under what conditions a similar situation cannot occur and find out safe parameters of the bridge construction. In this paper, we show various possibilities how to model the behaviour of suspension bridge. Then we introduce our own results concerning existence and uniqueness of time-periodic solutions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.58-68
• /
• 2000

In this paper, a mathematical model of describing oxygen density in multi-band type reheating furnaces was presented. Model designed in this paper was composed of majorly two parts. One is a model regarding 'variation of existing gas'. The other is a model of showing 'variation of oxygen content'. Each model is designed by considering four factors related to variation of oxygen density based on chemical reaction, fluid dynamics and fuzzy theory. Four factors to be considered are combustion reaction in burner, fluid transfer between adjacent combustion bands, fluid transfer from furnace's inner space to external space, and input of external air via gates. According to simulation results, it was shown that varying pattern of oxygen density in each combustion band is similar to generally expected operation data in reheating furnace.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.177-186
• /
• 2005

In this Paper. we propose vision-based camera localization technique using 3D information which is created by mapping of DEM and mountain image. Typically, image features for localization have drawbacks, it is variable to camera viewpoint and after time information quantify increases . In this paper, we extract invariance features of geometry which is irrelevant to camera viewpoint and estimate camera extrinsic Parameter through accurate corresponding Points matching by Proposed similarity evaluation function and Graham search method we also propose 3D information creation method by using graphic theory and visual clues, The Proposed method has the three following stages; point features invariance vector extraction, 3D information creation, camera extrinsic Parameter estimation. In the experiments, we compare and analyse the proposed method with existing methods to demonstrate the superiority of the proposed methods.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.618-622
• /
• 2008

In this paper, we suggest new music composition algorithm based on fractal theory. User can define and control fractal shape by setting an initial state and production rules in L-System. We generate an asymmetric fractal tree based on L-System and probability. Then a music is generated by the fractal tree image using sonification techniques. We introduce two composition algorithm using the fractal tree. First, monophonic music can be generated by mapping x and y axis to velocity and pitch, respectively Second, harmonic music also can be generated by mapping x and y axis to time and pitch, respectively Using our composition algorithm, user can easily generate a music which has repeated pattern created by recursive feature of fractal, and a music which has structure similar to fractal tree image.

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.393-397
• /
• 1999

Among various reactions which metal sulfides can undergo in the reducing environment, the lattice exchange reaction was examined in a attempt to selectively remove heavy metal ions contained in the Fe-Coagulants acid solution. We have examined Zeta potential along with pHs to investigate surface characteristics of ${FeS}_{(s)}$. As a result of this experiment, zero point charge(ZPC) of FeS is pH 7 and zeta potential which resulted from solid solution reaction between Pb(II) and ${FeS}_{(s)}$ is similar to that of ${PbS}_{(s)}$. Solubility characteristics of ${FeS}_{(s)}$ is appeared to that dissolved Fe(II) concentration increased in less than pH 4, and also increased with increasing heavy metal concentration. Various heavy metal ions(Pb(II), Cu(II), Zn(II)) contained in Fe-coagulants acid solution were removed selectively more than ninety-five percent in the rang of pH 2.5~10 by ${FeS}_{(s)}$. From the above experiments, therefore, We could know that the products of reaction between heavy metal ions and $FeS_{(S)}$ are mental sulfide such as $PbS_{(S)}$, $CuS_{(S)}$ and $ZnS_{(S)}$.