• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.641-649
• /
• 2002

The redox properties of a homogeneously-precipitated $TiO_2$ rutile powder with a BET surface area of ~$200 m^2$/g, consisting of an acicular primary particle, were characterized using photocatalytic reaction in aqueous 4-chlorophenol, Cu-EDTA and Pb-EDTA solutions under ultraviolet irradiation, compared to those of commercial P-25 X$200 m_2$ powder with a spherical primary particle as well as home-made anatase $TiO_2$ powder with ~$200 m^2$/g BET surface area. Here, the anatase powder also includes mainly the primary particles very similar to the acicular shapes of the rutile $TiO_2$ powder. The rutile powder showed the fastest decomposition rate and the largest amount in the photoredor, compared with the anatase or P-25 powder, while the anatase powder unexpectedly showed the slowest rate and the smallest amount in the same experiments regardless of almost the same surface area. From results, the excellent photoredox abilities of this rutile powder appears to be due to specific powder preparation method, like a homogeneous precipitation leading to direct crystallization from the solution, regardless of their crystalline structures even when having the similar particle shape and surface area.

• Journal of the Korean Society of Costume
• /
• v.59 no.10
• /
• pp.1-9
• /
• 2009

One piece of Jeogori and several books of the Goryeo dynasty were found inside of the wooden Buddhist Goddess of Mercy Statue of the Bogwang temple and they were designated as national treasure of Korea, No. 1571. The jeogori was the Jeogsam as the kind of underwear and conjectured as for women by considering its size. The collar of the jeogori was 3cm-wide square-shaped collar without gussit and the sleeve was close to straight line. Also the jeogori was designed without breast ties and could be adjusted by knot button. The fabrics for the jeogori showed similar pattern as complex silk gauze in 1302. It has not been reported yet that the complex silk gauze was used for the Jeogsam from Goryeo Dynasty to Joseon Dynasty. Comparing the Jeogori of the Bogwang temple to those of Goryeo Dynasty, it can be appropriately estimated as the remains of the Goryeo Dynasty since its shape and materials are very similar to those found in the Jeogori's of the Goryeo Dynasty and it was found between the books of the Goryeo Dynasty inside of the knee part of the wooden Buddhist Goddess of Mercy Statue of the Bogwang temple. Although only one piece of Jeogori was found, it's importance in cultural value or in the study of the fabric history cannot be underestimated considering the fact that the Jeogories of the Goryeo Dynasty are scarce, and that the used fabric was not commonly used complex silk gauze, and especially that this Jeogori is the only existing Jeogsam made of complex silk gauze.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.952-956
• /
• 1999

Cryoprotection of surimi by three commercial oligosaccharides (isomalto-, fructo- or galacto-, oligosaccharides) was investigated and compared with commercially used cryoprotectants (sucrose, sucrose+sorbitol). Surimis were made with oligosaccharides as cryoprotectants, and gels were prepared after 3 months of storage at $-18^{\circ}C$. After gel preparation, various physical properties (texture, water holding capacity, color, and microstructures) were measured. The gels containing oligosaccharides showed similar water holding capacities and microstructure as the commercially used cryoprotectants. They also showed similar lightness and whiteness as the commercial ones. In TPA(texture profile analysis), gels prepared with fructooligosaccharides showed highest fracturability than gets with sucrose, sucrose+sorbitol, or other oligosaccharides. These results showed a applicability of commercial oligosaccharides as a cryoprotectant in surimi processing.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.4
• /
• pp.165-175
• /
• 2010

Objectives: The purpose of this study is to evaluate the program theory of a lifestyle intervention program for the prevention and treatment of metabolic syndrome. Methods: The program evaluated is a tailored intervention for multiple health behavior associated with metabolic syndrome which is informed by theoretical constructs from the Intervention Mapping and Transtheoretical model. The program components include one-to-one health counseling, a self-management handbook, and a health diary. To evaluate program impact theory we examined the logic of program goals and objectives, intervention methods and strategies, and the theoretical constructs of program materials through document review and matrix building. Results: This evaluation has found that the intervention program applied social cognitive theory constructs to design intervention methods and strategies in addition to the Transtheoretical model: self-monitoring for goal setting and monitoring skill, outcome expectation for the benefits of health behavior change, and interaction with environment for observational learning through modeling. While the intervention addresses multiple determinants and behaviors, it is limited to an individual level and lacks social and environmental approaches. Following the Transtheoretical framework, the contents of the intervention materials were developed utilizing consciousness raising as a main strategy for earlier stages of change, and counterconditioning and stimulus control for later stages of change. Conclusion: Program theory evaluation can be a process of enhancing program validity. It would also be necessary for providing basis for efficient program implementation. When comparisons of program theory between similar programs are possible, program theory and validity will be strengthened when comparisons of program theories between similar programs are possible.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.18-25
• /
• 2015

Computational study of a gravity current prior to the backdraft was conducted using fire dynamic simulator (FDS). Various initial conditions of mixture compositions and compartment temperature as well as four opening geometries (Horizontal, Door, Vertical, and Full opening) were considered to figure out their effects on the gravity current. The density difference ratio (${\beta}$) between inside and outside of compartment, the gravity current time ($t_{grav}$) and velocity ($v_{grav}$), and non-dimensional velocity ($v^*$) were introduced to quantify the flow characteristics of the gravity current. Overall fluid structure of the gravity current at the fixed opening geometry showed similar development process for different ${\beta}$ conditions. However, $t_{grav}$ for entering air to reach the opposed wall to the opening geometry increased with ${\beta}$. Door, Vertical, and Horizontal openings where openings are attached on the ground showed similar development process of the gravity current except for Horizontal opening, which located on the middle of the opening wall. The magnitude of $v_{grav}$ at fixed ${\beta}$ was, from largest to smallest, Full > Vertical > Door > Horizontal, but it depended on both the size and location of the opening. On the other hand, $v^*$ was found to be independent to ${\beta}$, and only depended on the geometry of the opening.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1053-1055
• /
• 2002

Recently CRT is getting large-sized, Flatness and High Fine Pitched in the meantime the raw material for shadow mask is in rapid progress of thinness, Low Thermal Expansion and high strength.Until now we have used AK(Aluminum Killed) & Invar(Fe-Ni alloy) materials for main raw material of shadow mask component. However recently Nb and Co addition and Nb+Co addition, which has advantage of Low Thermal Expansion and High Strength. has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. Among of them, Co addition has been mass production as forming type (Flat CRT) with the beneficial effect of low thermal expansion & high strength for the first time. Since then Nb+Co addition has been used in mass production by the request of much higher strength of shadow mask component. In case of Nb addition, It's thermal expansion coefficient is a little lower than normal Invar and a little higher than Co addition, meanwhile Its Mechanical property is almost similar to Co Addition. The used samples of this experiment are 36%Ni + Fe, 32%Ni + 5%Co + Fe, 32%Ni + 5%Co + 0.3%Nb + Fe, 32%Ni + 0.3%Nb + Fe with heat treatment temperature of 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$, 900$^{\circ}C$ respectively under the condition of 15min holding time. After heat treatment, we have observed the change of mechanical property with addition of small elements through mechanical property investigation and metal structure observation as well as transition of thermal expansion coefficient by measuring of thermal expansion coefficient at 850$^{\circ}C$. In conclusion, 5%Co addition indicates that its thermal expansion coefficient is very similar under the condition of at 850$^{\circ}C$ for 15min 's heat treatment. From the experimental result it is suggested that Co addition is mostly suitable for Doming property and Nb addition is mostly suitable for Drop property.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.22-29
• /
• 2015

In this study, we tested to develop and apply structural insulation performance improvement concrete to field, which had compressive strength in 24 MPa and thermal conductivity twice as much as normal concrete. After experiment about slump and air contents, combination product of Plain and calcined diatomite powder showed reduction of slump and air contents and combination product with micro foam cell admixture, we cannot find result of slump and air contents reduction. Unit weight of combination product with insulation performance improvement materials decreased more than that of Plain. In the test of compressive strength, compressive strength of insulation performance improvement concrete decreased more than that of Plain but was content with 24 MPa. thermal conductivity of insulation performance improvement concrete tended to decrease. Freezing and thawing resistance of insulation performance improvement concrete was similar to that of Plain. In carbonation resistance test, combination product with calcined diatomite powder showed the result which was similar to that of Plain. In carbonation resistance test, combination product with micro foam cell admixture showed a increase compared to that of Plain and length variation of combination product generally increased.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1121-1126
• /
• 1998

For vacuum seated panel, stresses and displacements in the glass plate were calculated. The geometric variables for our experiment were the thickness of glass plate, the size of panel and the width of sealing line. The fracture behaviors and displacements of its under the vacuum were measured. From the measurement of strains and fracture, it was considered that the maximum stress acted at the middle of the sides of the panel. The stresses and displacement distribution of manufactured panels were greatly dependent on the width of the sealing line in the panel. The measured values are more similar to the values which were calculated from the condition of built-in edge as the width of the sealing line is larger. The measured displacement of the panel, made of 3mm thick glass plate, with size of $80\Times120\textrm{mm}^2$ and 20mm sealing line was $57\mu\textrm{m}$. This value is similar to calculated value, $54\mu\textrm{m}$, from built- in edge condition in the finite element method.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.25-35
• /
• 2011

Purpose: There are some advantages of the acrylic resin denture base ; appropriate strength, volume safety, simple processing apparatus, and low cost. But, it have a weakness for fracture by intense pressure or shock. However, the repairs for resin denture base are possible using various materials and techniques. There is a few studies in repairs for resin denture base, but not clinical researches. And there is no studies in absorbed saliva into the region of fracture and bond strength. This study is to observe re-bond strength of resin denture base after repairing under saliva absorption. Methods: The samples were made of heat curing resin and the rectangular parallelepiped specimens which were 50mm long, 10mm wide and 3mm high. The four different groups immersed in the artificial saliva for 2 weeks were prepared, 1) no repaired control samples, 2) immediately repaired samples, 3) repaired samples after 1 day dry, and 4) repaired samples after 3 days dry. The prepared samples were repaired by two different curing materials, self curing resin and heat curing resin method. Each groups composed of 10 specimens were experimented with the three point bending tests for bonding strength measuring Results: There were under condition absorbed in the artificial saliva and repaired by self curing resin method, repaired specimens after 1 day and 3 days dry groups had higher values of bonding strengths than control group, and bonding strengths of immediately repaired samples were similar to those of control samples (p<0.05). There were under condition immersed in the artificial saliva and repaired by heat curing resin method, immediately repaired samples showed similar values to bonding strengths of control groups, and repaired samples after 1 day and 3 days dry groups were lower than those of control group (p>0.05). Conclusion: In this study, the repairs for resin denture base were remarkably high values of bonding strengths than those of the past, and showed that have stable bonding strengths independent of saliva absorption of denture base, so present repairs for resin denture base can be performed, regardless of saliva conditions.