• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.325-330
• /
• 1995

Three types of model concrete with different mix ratios for 1/10 scale reinforced concrete model were made and tested to find the best solution for the simulation of mechanical characteristics of prototype concrete. Scaled reinforcing materials in diameter(D1.8) having similar con-figuration and mechanical properties with commercial deformed bars(D19) were prepared for 1/10 scale model tests of reinforced concrete structures. Two types of model test using D1.8 model reinforcing bars and model concrete, monotonic simple beam test and cyclic cantilever beam test, were performed to ensure and check the similitude of bond behavior between 1/10 scale model and prototype. The test results showed that the flexural behavior of 1/10 scale models can be simulated with accuracy enough for practical use in monotonic and cyclic loading test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.649-654
• /
• 2002

In order to suggest recyling and handling method of a tailing, observe it's physical and chemical properties, make an quality test of aggregates which are used a tailing and then examine a applied possibility in architectural materials. Tailing has a ununiform and many-side shape and it is organized quartz, muscovite, calcite, montmorillonite. pH is 6.86-7.28 and the result of leaching test is that Hg and Pb exceed of a standard. The specific gravity of aggregates which are used tailing is 1.95-2.23 and the absorption factor is 9-14.67%. The result of test for abrasion and crushing of aggregates which are used BFS is very excellent. The heavy metal is stabilized but a eruption property of Hg is similar to original sample.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.2
• /
• pp.119-123
• /
• 2011

Presented in the paper are findings of a project that examined the effect of slag grade and cement source on the performance of concrete mixtures. Slag cement contents were 20, 40, and 60 percent of the total cementitious material content. Two grades of slag cement were examined (Gr. 100 and Gr. 120) along with two sources of Type I cement. Compressive strength, durability, and permeability were measured. The results showed that the cement source affected the early age strength of the mixtures. At 28 days of age, mixtures containing Gr. 120 slag cement had higher compressive strengths than mixtures containing Gr. 100 slag cement, but by 90 days of age, the trend reversed. As for the chloride ion penetrability, mixtures cast with Gr. 100 slag cement passed fewer coulombs at 28 and 90 days of age than similar mixtures containing Gr. 120 slag. Mixtures containing Gr. 120 slag had the greatest durability factors.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.293-296
• /
• 2016

Using capacitance-voltage (C-V) and conductance-voltage (G/ω-V) measurements, the electrical properties of Cu/n-InP Schottky diodes were investigated. The values of C and G/ω were found to decrease with increasing frequency. The presence of interface states might cause excess capacitance, leading to frequency dispersion. The negative capacitance was observed under a forward bias voltage, which may be due to contact injection, interface states or minority-carrier injection. The barrier heights from C-V measurements were found to depend on the frequency. In particular, the barrier height at 200 kHz was found to be 0.65 eV, which was similar to the flat band barrier height of 0.66 eV.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.728-733
• /
• 2017

Herein, for the quantitative analysis of the arc beads related to electric fire, we used electron backscatter diffraction (EBSD), a measuring device for grain orientation of materials, we compared and analyzed the surface texture of primary and secondary beads according to the difference in cooling rate at ambient temperature. This analysis revealed that the primary beads showed similar distribution at both low and high angles, while the secondary beads showed a higher distribution at low angles than at high angles. Thus, EBSD can be used for quantitative analysis of the beads and can be applied to identify beads in the future.

• BMB Reports
• /
• v.31 no.4
• /
• pp.405-408
• /
• 1998

Endonuclease-sensitive sites detected by T4 endonuclease V or UvrABC nuclease treatments were compared in the dihydrofolate reductase gene of UV-irradiated Chinese hamster ovary B-11 cells. The number of endonuclease-sensitive sites detected by T4 endonuclease V treatment followed by NaOH denaturation was twice that of formamide denaturation. Repeated treatment of damaged genomic DNA with T4 endonuclease V resulted in no further increase in the number of endonuclease-sensitive sites detected. The numbers of endonuclease-sensitive sites detected by UvrABC nuclease using each denaturation condition were similar. Sequential treatment with the two endonucleases using formamide denaturation resulted in twice the number of endonuclease-sensitive sites detected by treatment of each nuclease alone. Due to a lack of AP endonuclease activity these results suggest the presence of T4 endonuclease V-sensitive sites which could be complemented by alkaline gel separation or by UvrABC nuclease treatment.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.197-199
• /
• 2011

In this paper, the bottom-gate thin-film transistors (TFTs) were fabricated with an amorphous/microcrystalline Si double layer (DL) as an active layer and the variations of the electrical characteristics were investigated according to the DC bias stresses. Since the fabrication process of DL TFTs was identical to that of the conventional amorphous Si (a-Si) TFTs, it creates no additional manufacturing cost. Moreover, the amorphous/microcrystalline Si DL could possibly improve stability and mass production efficiency. Although the field effect mobility of the typical DL TFTs is similar to that of a-Si TFTs, the DL TFTs had a higher reliability with respect to the direct current (DC) bias stresses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1108-1114
• /
• 1992

In this paper results from experimental studies on the line wave detonation of explosive welding were presented. Using the ultra high speed comera, the ling wave generation during the bonding, process of composite materials was observed with an equilateral triangle lens. Experimental results confirmed the line wave formation of the shock front. And the results indicated the effectiveness of the ling wave detonation method in the explosive welding of similar or dissimilar metals.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.381-385
• /
• 1998

Vibration-resistant rubbers, whose elastic and shear behaviors are similar to viscoelastic materials, are used to make brace-typed dampers to reduce the building vibration. Experimental study is carried out to find the vibration characteristics of the dampers installed in the building model. The natural frequencies and modal damping ratios are obtained from the free vibration test and Fourier analysis. Analytical model of the modal strain energy method are used to find the viscoelastic characteristics of the brace-typed dampers from the experimental results. Finally shaking table test is performed to find the response behavior of the building model under earthquake loading. The present experimental study shows that the brace-typed dampers have the behavior of viscoelastic dampers, which increase the modal damping ratios and viscoelastic characteristics.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.545-552
• /
• 2000

Eight aromatic hydrocarbons were quantified in a newly constructed building before occupancy during the period of November 1997 to January 1998. Air samples were collected in 6 L stainless steel canisters for 8 hours based on working hour. It was found that the measured total concentration of aromatic hydrocarbons decreases rapidly with time up to a steady-state value. However, the fractions for each aromatic hydrocarbon were greatly changed with time. The concentration ratios of indoor to outdoor for aromatic hydrocarbons are greater than 1 during early period of the measurement, and the ratios decrease with time. The concentrations of toluene, m+p-xylene, ethylbenzene, and o-xylene are much higher than those of styrene, 1, 2, 4-trimethylbenzene, and 1, 3, 5-f trimethylbenzene in indoor air. The concentration fractions of m+p-xylene, ethylbenzed, and o-xylene in indoor air are about twice as hight as those in outdoor air measured during the similar period. It was concluded that the aromatic hydrocarbons were emitted from building materials, paints, and adhesives in an-built building.