Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

The Orientation Comparison of the Primary and Secondary Beads Grain by EBSD

EBSD를 이용한 1, 2차 용융흔 결정립의 방위 비교 분석

  • Park, Kwang-Muk (Electrical Safety Research Institute, Korea Electrical Safety Corporation) ;
  • Bang, Sun-Bae (Electrical Safety Research Institute, Korea Electrical Safety Corporation) ;
  • Yang, Sung-Chae (Electrical Engineering, Chonbuk National University)
  • 박광묵 (한국전기안전공사 전기안전연구원) ;
  • 방선배 (한국전기안전공사 전기안전연구원) ;
  • 양성채 (전북대학교 전기공학과)
  • Received : 2017.09.19
  • Accepted : 2017.10.12
  • Published : 2017.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Herein, for the quantitative analysis of the arc beads related to electric fire, we used electron backscatter diffraction (EBSD), a measuring device for grain orientation of materials, we compared and analyzed the surface texture of primary and secondary beads according to the difference in cooling rate at ambient temperature. This analysis revealed that the primary beads showed similar distribution at both low and high angles, while the secondary beads showed a higher distribution at low angles than at high angles. Thus, EBSD can be used for quantitative analysis of the beads and can be applied to identify beads in the future.

Keywords

References

  1. National Fire Information System, Fire Statistics Status, http://www.nfds.go.kr (2015, 2016).
  2. C. S Choi, H. G. Kim, K. M. Song, D. W. Kim, D. W. Kim, Y. S. Kim, and K. Y. Lee, The Fire Investigation for the Ignition Position and the Collection Guide of a Hangover (Korea Electrical Safety Corporation, Korea, 2005) p. 130.
  3. H. S. Kim, A Study on the Fire Cause Identification by Wire Conductor Structure Analysis, Report (National Fire Service Academy, Korea, 2011) p. 14.
  4. C. S. Choi, H. W. Kim, K. S. Lee, C. H. Lee, Y. S. Leem, and J. H. Jung, Electrical Fire Engineering (Dong Hwa Technology Pub., 2004) p. 185.
  5. J. C. Jeon, H. J. Jeon, S. I. Lee, and J. G, Yoo, Journal of Korea Academia-Industrial cooperation Society, 8, 466 (2007).
  6. J. H. Kim, K. M. Park, J. Y. Park, K. I. Lee, S. B. Bang, H. N. Choi, B. K. Han, and H. B. Jo, Proc. 2016 Summer Annual Conference, Trans. (KIEE., Korea, 2016) p. 1551.
  7. V. Babrauskas, J. Fire Prot. Eng., 14, 189 (2004). [DOI: https://doi.org/10.1177/1042391504036450]
  8. G. F. Bennett, J. Hazard. Mater., 108, 141 (2004). [DOI: https://doi.org/10.1016/j.jhazmat.2004.01.007]
  9. R. J. Roby and J. McAllister, Forensic Investigation Techniques for Inspecting Electrical Conductors Involved in Fire (NCJRS, USA, 2010) p. 93.
  10. D. A. Porter, K. E. Easterling, D. H. Kim, and W. T. Kim, Phase Transformation in Matal and Alloys (Itc Pub., 2004) p. 121.
  11. E. J. Jung and S. I. Yoo, Ceramist, 5, 54 (2002).