• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.61-67
• /
• 2015

As the production of palm oil has been increased, the generation of oil palm biomass is also increased and the utilization of the oil palm biomass become more significant topic. One third of the oil palm biomass is empty fruit bunch (EFB) and the other two thirds are oil palm trunks and fronds. However, the effective use of oil palm biomass has not been developed and most of it is discarded near oil palm plants. In this study, we investigated the applicability of EFB to the paperboard mills, as an organic filler. The new organic filler was manufactured in a laboratory by grinding and fractionating dried EFB powder, and its properties were analyzed. The particles of EFB organic filler were larger and more spherical than those of the commercial wood powder. The use of EFB organic filler resulted in a higher bulk of the handsheets with similar trends of physical strength, compared to those made with wood powder. It was concluded that EFB could be used as a raw material to manufacture organic filler for paperboard production.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.43-50
• /
• 2013

The spot welds of Transformation Induced Plasticity (TRIP) steels are prone to interfacial failure and narrow welding current range. Hard microstructures in weld metal and heat affected zone arenormally considered as one of the main reason to accelerate the interfacial failure mode. There fore, detailed observation of weld microstructure for TRIP steels should be made to ensure better weld quality. However, it is difficult to characterize the microstructure, which has similar color, size, and shape using the optical or electron microscopy. The atomic force microscope (AFM) can help to analyze microstructure by using different energy levels for different surface roughness. In this study, the microstructures of resistance spot welds for AHSS are analyzed by using AFM with measuring the differences in average surface roughness. It has been possible to identify the different phases and their topographic characteristics and to study their morphology using atomic force microscopy in resistance spot weld TRIP steels. The systematic topographic study for each region of weldments confirmed the presence of different microstructures with height of 350nm for martensite, 250nm for bainite, and 150nm for ferrite, respectively.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.1-16
• /
• 2003

Nowadays, retro to the past fashion is appeared just as often as new challenge and trial. The style of Renaissance Era is the most often revival theme for contemporary fashion. So, this study was focused on 16C of Renaissance costume. It is investigated the characteristics of Renaissance costume through referring the literature to be able to restore the past costume as through as possible with the object of building database for developing new design. This study is done in two different ways at the same time, direct study to restore and indirect study to refer. Direct one is of the past costume as thoroughas possible based on referring to the originals. The other is referring the costume historical literature The costumes to restore is chosen among 16C famous pictures on the basis of how much they can show the typical chracteristics of 16C costume. Materials including textiles and ornaments which are necessarily to restore were shopped in Dongdeamoon Market. Some materials had a problem to get exactly the same one in Seoul on 21C. After visiting imes, the materials is chosen as similar as originals. Three sets of costume were restored on the basis of referring "Pattern of Fashion" written by Janet Arnold. The costumes were restored by reinforcing bodice based on the size of waist and in every three works. The way of sewing is based on hand sewing for details and machin-sewing for seam. Quilting intl lining is uwed giving the fabric stiffness to maintain the form from the heavy padding. Also the part of piles on margins is used darts instead of gather, because of reducing bulkiness of seam. General closing methods are hook and eyes, and lacing with points.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.110-116
• /
• 1991

As the model compounds, citral and n-octanol which possess similar characteristics and structures of low molecular weight insect pheromones and $({\pm})-5-hydroxy-4-methyl-heptan-3-one$ which shows the aggregation pheromones activity of the rice weevil and the maize weevil were microencapsulated with low molecular weight polyethylene(LMPE) and urea-formaldehyde resin as wall materials. The core materials were microencapsulated as small particles in LMPE and urea-formaldehyde resin polymers and the microencapsulated polymers were white powders. And the polymer made from urea-formaldehyde resin was better than that from LMPE as wall material. The slow releasing effect and the releasing patten of the microencapsulated core materials were examined by solvent extraction method and headspace sampling method. Citral and n-octanol and $({\pm})-5-hydroxy-4-methyl-heptan-3-one$ were release more than 40 days and 15 days, respectively. The releasing pattern of urea-formaldehyde resin microcapsules showed rather smooth decrease than that of LMPE and was maintained at steady level longer.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.349-356
• /
• 1994

For the deformation, life time prediction and improvement of the life time in high temperature materials it's very important to know the mechanism of deformation. For these mechanisms the dislocation loop models of Orlova et al. and Mills et al. are used often now. But they show controversial differencies, even if they have unertaken similar experimental tests with the same alloy of A1-5.5at.% Mg. In this work also the similiar tests of them have done under the same temperature of 573 K ; (1) The specimen was deformed by $\sigma$= 30MPa and $\varepsilon$=0.03. (2) Direct after creep deformation of $\sigma$= 30MPa and $\sigma$= 0.03 the stress reduction tests to 15, 10 and OMPa have been performed. (3) To study the loop models dislocation structure and dislocation density ( p ) have been observed.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.416-420
• /
• 2012

Recently nanoscience and nanotechnology have been studied intensively, and many plants, insects, and animals in nature have been found to have nanostructures in their bodies. Among them, lotus leaves have a unique nanostructure and microstructure in combination and show superhydrophobicity and a self-cleaning function to wipe and clean impurities on their surfaces. Coating films with combined nanostructures and microstructures resembling those of lotus leaves may also have superhydrophobicity and self-cleaning functions; as a result, they could be used in various applications, such as in outfits, tents, building walls, or exterior surfaces of transportation vehicles like cars, ships, or airplanes. In this study, coating films were prepared by dip coating method using polypropylene polymers dissolved in a mixture of solvent, xylene and non-solvent, methylethylketon, and ethanol. Additionally, attempts were made to prepare nanostructures on top of microstructures by coating with the same coating solution with an addition of carbon nanotubes, or by applying a carbon nanotube over-coat on polymer coating films. Coating films prepared without carbon nanotubes were found to have superhydrophobicity, with a water contact angle of $152^{\circ}$ and sliding angle less than $2^{\circ}$. Coating films prepared with carbon nanotubes were also found to have a similar degree of superhydrophobicity, with a water contact angle of 150 degrees and a sliding angle of 3 degrees.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.287-296
• /
• 2016

$Ni_{1/3}Co_{1/3}Mn_{1/3}(OH)_2$ powders have been synthesized in a continuously stirred tank reactor via a co-precipitation reaction between aqueous metal sulfates and NaOH using $NH_4OH$ as a chelating agent. The co-precipitation temperature is varied in the range of $30-80^{\circ}C$. Calcination of the prepared precursors with $Li_2CO_3$ for 8 h at $1000^{\circ}C$ in air results in Li $Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ powders. Two kinds of obtained powders have been characterized by X-ray diffraction (XRD), scanning electron microscopy, particle size analyzer, and tap density measurements. The co-precipitation temperature does not differentiate the XRD patterns of precursors as well as their final powders. Precursor powders are spherical and dense, consisting of numerous acicular or flaky primary particles. The precursors obtained at 70 and $80^{\circ}C$ possess bigger primary particles having more irregular shapes than those at lower temperatures. This is related to the lower tap density measured for the former. The final powders show a similar tendency in terms of primary particle shape and tap density. Electrochemical characterization shows that the initial charge/discharge capacities and cycle life of final powders from the precursors obtained at 70 and $80^{\circ}C$ are inferior to those at $50^{\circ}C$. It is concluded that the optimum co-precipitation temperature is around $50^{\circ}C$.

• Korean Journal of Head & Neck Oncology
• /
• v.13 no.2
• /
• pp.180-186
• /
• 1997

Objectives: Salivary gland tumors pose considerable difficulty in diagnostic and prognostic assessment based on the histopathologic features alone. We studied the expression of type IV collagen and fibronectin in salivary gland tumors with special emphasis on the differential diagnostic significance. Materials and Methods: We did immunohistochemical stain on paraffin embedded tissues of 33 benign and 24 malignant salivary gland tumors using monoclonal antibody for type IV collagen and polyclonal antibody for fibronectin. Results: 1) Well preserved linear basement membrane-like staining of type IV collagen was detected in duct-cell-derived benign salivary gland tumors. But pleomorphic adenoma exhibited a heterogeneous pattern as focal augmentation and interruption. 2) In malignant tumors, type IV collagen was distributed in an irregular, interrupted manner or completely absent. Adenoid cystic carcinomas displayed a marked staining of the basal membrane associated substances in the pseudocysts. 3) The staining pattern of fibronectin was similar to that of type IV collagen execpt more dense in the stroma. 4) Salivary gland tumors which have a prominent myoepithelial cell component revealed a particular deposition of basement membrane materials adjacent to the myoepithelial cells. Conclusion: The study of the basal membrane substances may be helpful for differential diagnosis of benign and malignant salivary gland tumors and identifying special features of salivary gland tumors such as pseudocystic pattern of adenoid cystic carcinoma. Also we think that the myoepithelial cells contribute to the formation of basement membrane materials.

• Health Policy and Management
• /
• v.30 no.2
• /
• pp.164-177
• /
• 2020

This study aims to compare the experience of selected countries in operating separate payment system for new healthcare technology and to find implications for price setting in Korea. We analyzed the related reports, papers, laws, regulations, and related agencies' online materials from five selected countries including the United States, Japan, Taiwan, Germany, and France. Each country has its own additional payment system for new technologies: transitional pass-through payment and new technology ambulatory payment classification for outpatient care and new technology add-on payment for inpatient care (USA), an extra payment for materials with new functions or new treatment (C1, C2; Japan), an additional payment system for new special treatment materials (Taiwan), a short-term extra funding for new diagnosis and treatment (NUB; Germany), and list of additional payments for new medical devices (France). The technology should be proven safe and effective in order to get approval for an additional payment. The price is determined by considering the actual cost of providing the technology and the cost of existing similar technologies listed in the benefits package. The revision cycle of the additional payment is 1 to 4 years. The cost or usage is monitored during that period and then integrated into the existing fee schedule or removed from the list. We conclude that it is important to set the explicit criteria to select services eligible for additional payment, to collect and analyze data to assess eligibility and to set the payment, to monitor the usage or cost, and to make follow-up measures in price setting for new health technologies in Korea.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".