• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.160-171
• /
• 2019

The sword with a ring pommel, which was excavated from the first stone chamber of the ancient tombs of Jeongchon Village in Naju, is a sword with a pentagon undecorated ring pommel consisting of a mother sword and two child swords. The sword with an undecorated ring pommel of Jeongchon comprises a ring pommel, a hilt, a knife, and a knife end decoration. This sword was coated with lacquer. The ring pommel is an iron frame covered with silver plate; however the silver tarnished into a light purple due to silver chloride corrosion, and iron corrosion originated from the inside is visible on the surface. Silver chloride corrosion is produced when silver objects are exposed to water, dissolved salts, and dissolved chloride ions when in a buried state. It changes objects into powder, making it difficult to preserve original shapes. The other silver artifacts found in the Jeongchon ancient tombs show similar signs of corrosion. The results of X-ray irradiation and a CT analysis showed that the sword had a ring at the end of the handle, a T-shaped hilt, and was probably connected to the handle end of a knife. If the shape of the mother sword can be inferred from the child swords, the mother sword had a ring pommel, decorations of the handle, covered with silver plate, and a gold ring and a silver line wound around the handle. It is assumed that the ring pommel was connected to the knife by welding because no holes were observed. The end decoration of the knife was made by using an iron plate formed into a shape, half covered by silk, and the other half decorated with silver plate and a gold ring. The sword with an undecorated ring pommel excavated from the ancient tombs of Jeongchon Village comprises the metals of gold, silver, and iron, and includes features of Baekje, Silla, and Gaya, which highlights the influence of surrounding historic sites and various cultures.

• Composites Research
• /
• v.31 no.6
• /
• pp.421-428
• /
• 2018

In order to optimize the prepreg compression molding (PCM) process, the forming simulation is required to cope with any problems that may be raised during the process. For the improvement of simulation accuracy, the input data of material property should be measured accurately. However, most studies assume that the compressive properties of the prepreg are identical to the tensile properties without quantifying them separately. Therefore, in this study, the in - plane compressive properties of the prepreg are presented to improve the accuracy of the forming simulation. As a result, the compressive modulus of the fibers was measured to be about $10^{-2}$ times lower than the tensile modulus. Also we designed a square-cup mold with a tilting angle of $110^{\circ}$ to simulate the prepreg formability during the high temperature compression mold process. Shear angles were measured at each corner, which were compared with the simulation results. It was observed that the simulation results using the accurate compressive properties of the prepreg showed a similar trend with the experimental results. It was confirmed that the measured data of the in-plane compression property improved the accuracy of the forming simulation results.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2019

Rosemary (Rosmarinus officinalis L.) is widely used as a food material. Although various physiological activities of rosemary have been reported, there have been no studies on the physiological activity of solvent extracts with different polarities. Rosemary extracts were obtained by extraction of dried powder using 0%, 25%, 50%, 70%, and 95% ethanol (EtOH) in distilled water, methanol, ethyl acetate, and hexane. As these ratios of EtOH are generally chosen by default and scarcely optimized, we investigated the impact of the composition of EtOH in distilled water on extract-related characteristics, such as DPPH free radical scavenging and ${\alpha}$-glucosidase inhibition, on the differentiation of 3T3-L1 adipocytes and inhibition of tyrosinase. Adipogenesis inhibition was highest at 70% EtOH. DPPH scavenging activity and inhibition of tyrosinase activity were reduced with 50% EtOH in water. However, inhibition of ${\alpha}$-glucosidase activity was higher in 50% EtOH in water. The best solvents in terms of DPPH scavenging activity, inhibition of tyrosinase and ${\alpha}$-glucosidase, and differentiation of adipocytes obtained with different concentrations of EtOH, although a lower similar activities were found with 50% ethanol. Considering the extraction solvents, a ratio of EtOH in water gives different content and constituents of compounds. These differences will give activities inhibition of adipogenesis, tyrosinase, ${\alpha}$-glucosidase activity, and DPPH scavenging activity.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.123-138
• /
• 2019

The clinical institution of some dental hygiene students and the degree of practice and performance according to the practice contents are identified, so as to develop clinical practice guidelines and to improve the education of universities and practical institutions. From November 2016 to March 2017, the questionnaire was prepared by self-inclusion after explaining the purpose of research and how to prepare questionnaire to some dental hygiene students. This material has been analyzed using PASW Statistics 18.0. As for the clinical practice content items of basic care and infection control, the frequency of "execution" among practice methods was high, and the distribution rate was high in oral evil face radiation, preventive dentistry, prosthesis, periodontology, orthodontics, and oral internal medicine. The conservation department has conducted various practical methods such as "executing," "observing" and "preparing." Oral surgery showed similar distribution rates, such as "observation," "preparation," and "execution" in the "preparation and cooperation of the feet." In pediatric dentistry, "observation" was the most common practice, and among them, "observation," "preparation," and "execution" were performed in "preparation and cooperation for infantile development." In addition, students with more experience in clinical practice showed statistically significant differences in basic care, oral hygiene, preventative dentistry, conservation, dental dentistry, oral surgery, orthodontics, and oral internal medicine(p<0.05). Most clinical practice shows that it is more observable than performed.It is expected that the goal of clear clinical practice content should be set by grade or number of clinical practice experiences, as well as the practice method that can be performed by the trainees.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.87-92
• /
• 2019

In this paper, we have verified a low-voltage EM(elasto-magnetic) sensing technique for tensile force management of PSC(prestressed concrete) internal tendon in order to apply the technique to actual construction sites where stable power supply is difficult. From observation of past domestic and overseas PSC structural accident cases, it was found that PS tension is very important to maintain structural stability. In this paper, we have tried to measure the tensile force from a magnetic hysteresis curve through EM sensors according to voltage value by using relation between magnetostriction and stress of ferromagnetic material based on elastic-magnetic theory. For this purpose, EM sensor of double cylindrical coil type was fabricated and tensile force test equipment for PS tendon using hydraulic tensioning device was constructed. The experiment was conducted to confirm relationship between changes of permeability and tensile force from the measurement results of the maximum / minimum voltage amount. The change of magnetic hysteresis curve with magnitude of tensile force was also measured by reducing amount of voltage step by step. As a result, the slope of estimation equation in accordance with magnitude of magnetic field decreases with the voltage reduction. But it was confirmed a similar pattern of change of magnetic permeability for the magnetic hysteresis loop. So, in this study, it is considered that it is possible to manage the tensions of PSC internal tendon using EM sensing technique in low-voltage state.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.64-71
• /
• 2017

This study investigated the effects of the mixing ratio of tofu paste and normal corn starch on the characteristics of gluten-free (GF) muffins. Soft wheat flour for wheat flour-based muffins (control) was replaced with the mixture of tofu paste and normal corn starch (NCS). The mixing ratios of tofu paste and NCS were 1:6.4 (S100), 1:5.1 (S80), 1:3.8 (S60), 1:2.6 (S40), 1:1.3 (S20), and 1:0 (S00), based on their total solid contents. GF muffins of S40-S100 developed the porous, sponge-like structure without crumb collapse. The weight and baking loss did not significantly differ in the control and GF muffins. By decreasing NCS in GF muffin batters, the moisture content, firmness, and crumb redness/yellowness of GF muffins increased, while their volume, specific volume, and crumb lightness decreased. Nevertheless, these characteristics (except for firmness) of S100 were much closer to those of the control. In the preference test, however, S60 (possessing lower attributes than S100 and S80) was most favored among GF muffins, and was very similar in all evaluations (except for appearance) to the control. Overall, the mixture of tofu paste and NCS would be a potential material to replace soft wheat flour in muffins.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.511-519
• /
• 2021

Slewing bearing is applied to the transmission of rotational power of the body and turret in a special vehicle for anti-aircraft weapons that overcomes the enemy flight system approaching at low altitudes with rapid response fire. When the turret load and impact load generated when shooting are combined in performing the combat mission of a special vehicle, structural stability must be secured to achieve a successful function. Among the components of the slewing bearing, the stability of the components against the complex loads acting by the turret drive and shooting was evaluated by considering the shape and material characteristics of the ring-gear, roller, and wire-race. As a research method for stability evaluation, based on engineering theory, the strength characteristics of the components were examined by numerical calculations. Finite element analysis was performed on components using the ANSYS analysis program. The results of theoretical analysis and the results of finite element analysis were very similar. A structural stability evaluation for the slewing bearing, which was performed mainly on the analysis, confirmed that the design strength of the slewing bearing determined in the preliminary design in the early stage of localization development was sufficient.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.5-13
• /
• 2021

In this study, as the production of high-strength steel pipes due to the development of steel materials, the stability and applicability of the soil nailing method using high-strength steel pipes were evaluated. Rebars used as reinforcement in the soil nailing method are the same in order to determine the behavioral characteristics and the effect of increasing the reinforcement when replacing it with a high-strength steel pipe of a diameter, a field test were conducted to confirm the stability. As a result of the tensile test, the measured strain is smaller than the strain in the theoretical equation, so it can be seen that the behavior is similar to that of the soil nailing method using rebars. As a result of the displacement measurement, the displacement of the high-strength steel pipe is larger than that of the rebars is considered to be the effect of the internal grouting effect of the steel pipe and the decrease in the cross-sectional area. In the case of using high-strength steel pipes for the soil nailing method, it is judged that the field applicability is good by improving stability and workability through member performance and weight reduction.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.407-414
• /
• 2020

To replace the sawdust in the growth medium of oyster mushroom to utilize its by-product spent mushroom substrates (SMS) as feed for ruminant, we performed cultivation test using cotton seed hull pellet (CSHP), corn stalk pellet (CSP), corncob (CC), and analyzed the feed chemical properties of those SMS. As a result of cultivation test, CC and CSHP treatment took 27 days for spawn run, 4 days for primordium formation, and 3 days for development fruiting bodies, resulting in a total cultivation period of 34 days. The yield per bottle was 134 g for CC treatment, similar to 130 g for control, while CSHP treatment (112 g) and CSP treatment (68 g) were lower than that of control. The highest biological efficiency (BE) was shown in CC treatment as 80.1%, which was 11.4% higher than 68.7% of control. The SMS of CC treatment had a relatively low content of neutral detergent fiber and acid detergent fiber, and in particular, lignin content was the lowest and crude protein content was the highest among other treatments. Therefore, CC as a substitute material for sawdust was capable of stable mushroom production and excellent nutritional value as a feed for its by-products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.188-196
• /
• 2021

For the tactical vehicles operated by the Korean army, the hub-reduction portal axle was applied considering Korea's topographical characteristics. Hub-reduction was applied to a Korean military vehicle to increase the vehicle body to secure ground clearance and improve the driving capability on rough roads, such as unpaved and field land by increasing the torque. The Korean military is operating tactical vehicles after various performance tests, including durability driving, but wheel damage occurred in one of the vehicles operating in the front units. Failure analysis revealed many damaged parts, including the hub, making it difficult to determine the cause. Therefore, an analysis of the failure occurrence mechanism for each damaged part was conducted, which confirmed that the cause of wheel breakage was a hub. Furthermore, the root cause of the hub breakage was a crack due to internal pores and foreign matters. In addition, a realistic improvement plan that can be applied throughout the design, manufacture, and shipping stages was presented using the fishbone diagram analysis. The derived improvement plan was verified through unit performance tests, including CAE and actual vehicle tests, and by reflecting this, the driving safety of Korean tactical vehicles was improved. Finally, it is expected that the proposed method for analyzing the failure occurrence mechanism will be used as reference material when analyzing the quality problems of similar military vehicles in the future.