• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.224-231
• /
• 2016

The usefulness of Gel Bolus phantom was investigated by comparing the temperature distribution characteristic of the agar phantom produced to investigate the dose distribution characteristic of radiofrequency hyperthermia device with that of the Gel Bolus phantom under conditions similar to those of an agar phantom that can continuously carry out temperature measurement. The temperatures of the agar phantom and the Gel Bolus phantom were raised to $36.5{\pm}3^{\circ}C$ and a temperature sensing was inserted at depths of 5, 10, and 15 cm from the phantom central axis. The temperature increase rate and the coefficient of determination were analyzed while applying output powers of 100 W and 150 W, respectively, at intervals of 1 min for 60 min under conditions where the indoor temperature was in the range $24.5{\sim}27.5^{\circ}C$, humidity was 35~40%, internal cooling temperature of the electrode was $20^{\circ}C$, size of the upper electrode was 250 mm, and the size of the lower electrode was 250 mm. The coefficients of determination of 150 W output power at the depth point of 5 cm from the central axis of the phantom were analyzed to be 0.9946 and 0.9926 in the agar and Gel Bolus phantoms, respectively; moreover, the temperature change equation of the agar and Gel Bolus phantoms with time can be expressed as follows in the state the phantom temperature is raised to $36^{\circ}C:Y(G)$ is equation of Gel Bolus phantoms (in 5 cm depth) applying output power of 150 W. Y(G)=0.157X+36. It can be seen that if the temperature is measured in this case, the Gel Bolus phantom value can be converted to the measured value of the agar phantom. As a result of comparing the temperature distribution characteristics of the agar phantom of a human-body-equivalent material with those of the Gel Bolus phantom that can be continuously used, the usefulness of Gel Bolus phantom was exhibited.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1741-1754
• /
• 2020

Objective: This study was conducted to estimate genetic parameters for milk yield traits using daily milk yield records from parlour data generated in an intensively managed commercial dairy farm with Jersey and Jersey-Friesian cows in Sri Lanka. Methods: Genetic parameters were estimated for first and second lactation predicted and realized 305-day milk yield using univariate animal models. Genetic parameters were also estimated for total milk yield for each 30-day intervals of the first lactation using univariate animal models and for daily milk yield using random regression models fitting second-order Legendre polynomials and assuming heterogeneous residual variances. Breeding values for predicted 305-day milk yield were estimated using an animal model. Results: For the first lactation, the heritability of predicted 305-day milk yield in Jersey cows (0.08±0.03) was higher than that of Jersey-Friesian cows (0.02±0.01). The second lactation heritability estimates were similar to that of first lactation. The repeatability of the daily milk records was 0.28±0.01 and the heritability ranged from 0.002±0.05 to 0.19±0.02 depending on day of milk. Pearson product-moment correlations between the bull estimated breeding values (EBVs) in Australia and bull EBVs in Sri Lanka for 305-day milk yield were 0.39 in Jersey cows and -0.35 in Jersey-Friesian cows. Conclusion: The heritabilities estimated for milk yield in Jersey and Jersey-Friesian cows in Sri Lanka were low, and were associated with low additive genetic variances for the traits. Sire differences in Australia were not expressed in the tropical low-country of Sri Lanka. Therefore, genetic progress achieved by importing genetic material from Australia can be expected to be slow. This emphasizes the need for a within-country evaluation of bulls to produce locally adapted dairy cows.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.35-43
• /
• 2015

Purpose - This study aims to seek various plans to maintain the advancement of the overseas and domestic employment scenario through a case analysis of the Japanese industry, which maintains domestic employment while promoting the overseas advancement of companies despite having a similar industrial structure as Korea. The study further intends to derive insightful implications for Japanese manufacturing companies and government policies. Research design, data, and methodology - We selected four companies from the Japanese manufacturing industry. Being companies that were successful in increasing the domestic employment scenario while advancing in overseas markets. We utilized several secondary data sources including Japanese newspapers and report literature. Results - Previous studies have shown a negative relationship between Foreign Direct Investment (FDI) or offshoring and domestic employment. However, our results showed this relationship with respect to the Japanese manufacturing industry as follows: 1. FDI for developing overseas markets does not decrease domestic production. If Japanese companies change their strategy from exports to overseas production, there will be a consequent decrease in domestic employment of Multinational Enterprises (MNEs). However, the local production that plans the sales expansion of a foreign market does not substitute domestic production. 2. Several case studies illustrate that, as the production of final goods is expanded in foreign countries, there is a corresponding increase in the export of intermediary goods from Japan. In this case, if the production process of Japanese companies is promoted in foreign markets, the amount of exported material and parts from Japan will consequently increase. 3. It is difficult to consider that the establishment of subsidiary companies in foreign countries by manufacturing companies for wholesale, retail, and services decreases domestic employment. This is because the international development of these industries needs expatriates, expatriate training organizations, and research and development (R&D) activities. 4. When there is overseas demand, the growth of local management activities is expected to increase the work of the overseas business department in the head office in Japan, if competitiveness can be secured for better localization and management speed. 5. The conversion of the domestic manufacturing industry into high value-added production is necessary. The relocation of domestic production to foreign markets decreases domestic employment. To prevent this, the upgradation of domestic production bases, including high value-added production, and R&D capability need to be strengthened. Technology-based companies must develop new technology, patents, processes, and so forth, which require extensive human resources for R&D. Conclusions - Domestic medium-sized companies that are capable of consistently supplying high value-added products should be actively encouraged to deploy into and develop overseas markets. Further, this paper considers the necessity of a guidance policy that provides suggestions for overseas deployment, by the initiation of the government, to companies that cannot do so due to the lack of foreign experience or decisions by the CEO, despite having the relevant capability and technologies to supply high value-added products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.847-854
• /
• 2003

In general cooked rice would be used as a major raw material for making Takju. In this case quality, taste and storage time of Takju were not fully satisfied. Fermentation conditions for Takiu mash were examined by using the germed brown rice in this study. In case of the germed brown rice on 2nd stage mash, alcohol was slowly generated in comparison with the cooked rice. Reducing sugar was slowly produced and the amount of reducing sugar was low. The sugar content was created at a uniform rate. The pH was shown to be higher in mash of the germed brown rice than that of the cooked rice. Acidity change showed a similar inclination to pH change. The degree of yeast growth on the mash of the germed brown rice was revealed to be slightly lower than that of the cooked rice. Temperature of mash was kept to be constant after 3 days from fermentation. Fusel oil produced from the mash of the germed brown rice was less gernerated in comparison with the cooked rice. Amount of amino acid in case of the germed brown rice was indicated to be higher. Takju made with the germed brown rice was shown to be 1.3 times in overall taste, 1.5 times in refreshing as compared with Takju made with the cooked rice. However there are no differences between them in flavor and color of Takju. In overall acceptance Takju made with the germed brown rice was shown to be 1.3 times as compared with Takju made with the cooked rice. In conclusion the germed brown rice was expected to be able to be better in Takju quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.323-329
• /
• 1995

For the effective utilization of dark meat separated as by-product from skip-jack canning, the dark meat concentrate(DPC) was prepared by removal of extractable materials with ethanol from dried dark meat. Dark meat protein hydrolysate(DPH) was prepared by the hydrolysis of DPC with ${\alpha}-chymotrypsin$. ${\alpha}-Chymotrypsin$ hydrolysed DPC to the extend of 79% during 10hr. The solubility over a pH range 1~12 showed similar trend on the both of DPH and DPC. The highest solubility was 81% on the DPH and was 36% on the DPC at pH 3. The lowest solubility was 65% on the DPH and was 22% on the DPC at pH 7. The content of total free amino acid was higher in the DPC than in the DPH, but the content of total essential free amino acid was higher in the DPH. Especially, the contents of taurine in the DPC and DPH were much higher than those of other amino acids. The result of sensory evaluation on the fish sauce analogue showed good taste, color and odor at the supplemented level of 8g DPH per 100ml of raw solution of fish sauce analogue and didn't show signifcaint difference compared with market fish sauce(p<0.05). On the preparation of surimi gel, 2% substitution of DPH for the supplemented starch was the most appropriate level.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10937-10941
• /
• 2015

Pathogenesis of lung cancer is a complicated biological process including multiple genetic and epigenetic changes. Since cigarette smoking is confirmed as the most main risk factor of non-small cell lung cancer (NSCLC), the aim of this study was to determine whether tobacco exposure plays a role in gene methylation. Methylation of the RAR-${\beta}$ gene were detected using methylation-specific polymerase chain reaction in DNA from 167 newly diagnosed cases with NSCLC and corresponding 105 controls. A significant statistical association was found in the detection rate of the promoter methylation of RAR-${\beta}$ gene between NSCLC and controls ($x^2$=166.01; p<0.01), and hypermethylation of the RAR-${\beta}$ gene was significantly associated with smoking status (p=0.038, p<0.05). No relationship was found between RAR-${\beta}$ gene methylation and pathologic staging including clinical stage, cell type, gender and drinking (p>0.05), and the methylation of RAR-${\beta}$ gene rate of NSCLC was slightly higher in stages III+IV (80.0%) than in I+II (70.8%). Similar results were obtained for methylation of the RAR-${\beta}$ gene between squamous cell carcinoma (77.9%) and other cell type lung cancer (73.9%). These results showed that the frequency of methylation increased gradually with the development of clinical stage in smoking-associated lung cancer patients, and tobacco smoke may be play a potential role in RAR-${\beta}$ gene methylation in the early pathogenesis and process in lung cancer, particularly squamous cell carcinoma. Aberrant promoter methylation is considered to be a promising marker of previous carcinogen exposure and cancer risk.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.415-420
• /
• 2011

Purpose: Calcium phosphate cement (CPC) is one of many useful materials for restoring tooth defects, periodontium and maxillofacial area. Chitosan is a biodegradable material that has been shown to promote the growth and differentiation of osteoblasts in culture. This study examined the interaction between odontoblasts and bio-calcium phosphate cement reinforced with chitosan. Materials and Methods: $5{\times}10^3$ odontoblastic cells were seeded into each well. Various concentrations of bio-calcium phosphate cement reinforced with chitosan (10, 20, 50, 100, 200, 500 ${\mu}g$/ml, 1, 2, 4 mg/ml) were diluted and added to the wells. The well was incubated for 24 h, 48 h and 72 h. After incubation, the number of cells was assessed to determine the cell viability. A cytokinesis-block micronucleus assay and chromosomal aberration test were carried out to estimate the extent of chromosomal abnormalities. Microscopic photographs and RT-PCR were performed to examine the adhesion potential of bio-calcium phosphate cement reinforced with chitosan. Results: Bio-CPC-reinforced chitosan did not show significant cytotoxicity. The number of damaged chromosomes in the cells treated with Bio-CPC-reinforced chitosan was similar to that in the control cells. There was no significant increase in the number of chromosomal aberrations in the Bio-CPC reinforced chitosan exposed cells. Microscopic photographs and RT-PCR confirmed the adhesive potential of bio-CPC reinforced chitosan to odontoblasts. Conclusion: Bio-CPC-reinforced chitosan did not affect the odontoblastic cell viability, and had no significant cytotoxic effect. Bio-CPC-reinforced chitosan showed adhesive potential to odontoblasts. These results are expected form the basis of future studies on the effectiveness of dental restorative materials in Bio-CPC reinforced with chitosan.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.4
• /
• pp.363-367
• /
• 2016

Objective : To compare the fusion rate of a hydroxyapatite demineralized bone matrix (DBM) with post-laminectomy acquired autograft in lumbar interbody fusion surgery and to evaluate the correlation between fusion rate and clinical outcome. Methods : From January 2013 to April 2014, 98 patients underwent lumbar interbody fusion surgery with hydroxyapatite DBM (HA-DBM group) in our institute. Of those patients, 65 received complete CT scans for 12 months postoperatively in order to evaluate fusion status. For comparison with autograft, we selected another 65 patients who underwent lumbar interbody fusion surgery with post-laminectomy acquired autograft (Autograft group) during the same period. Both fusion material groups were matched in terms of age, sex, body mass index (BMI), and bone mineral density (BMD). To evaluate the clinical outcomes, we analyzed the results of visual analogue scale (VAS), Oswestry Disability Index (ODI), and Short Form Health Survey (SF-36). Results : We reviewed the CT scans of 149 fusion levels in 130 patients (HA-DBM group, 75 levels/65 patients; Autograft group, 74 levels/65 patients). Age, sex, BMI, and BMD were not significantly different between the groups (p=0.528, p=0.848, p=0.527, and p=0.610, respectively). The HA-DBM group showed 39 of 75 fused levels (52%), and the Autograft group showed 46 of 74 fused levels (62.2%). This difference was not statistically significant (p=0.21). In the HA-DBM group, older age and low BMD were significantly associated with non-fusion (61.24 vs. 66.68, p=0.027; -1.63 vs. -2.29, p=0.015, respectively). VAS and ODI showed significant improvement after surgery when fusion was successfully achieved in both groups (p=0.004, p=0.002, HA-DBM group; p=0.012, p=0.03, Autograft group). Conclusion : The fusion rates of the hydroxyapatite DBM and Autograft groups were not significantly different. In addition, clinical outcomes were similar between the groups. However, older age and low BMD are risk factors that might induce non-union after surgery with hydroxyapatite DBM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.409-409
• /
• 2014

Recently hexagonal boron nitride (h-BN), III-V compound of boron and nitrogen with strong covalent $sp^2$ bond, is a 2 dimensional insulating material with a large direct band gap up to 6 eV. Its outstanding properties such as strong mechanical strength, high thermal conductivity, and chemical stability have been reported to be similar or superior to graphene. Because of these excellent properties, h-BN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Ultra flat and charge impurity-free surface of h-BN is also an ideal substrate to maintain electrical properties of 2 dimensional materials such as graphene. To synthesize a single or a few layered h-BN, chemical vapor deposition method (CVD) has been widely used by using an ammonia borane as a precursor. Ammonia borane decomposes into hydrogen (gas), monomeric aminoborane (solid), and borazine (gas) that is used for growing h-BN layer. However, very active monomeric aminoborane forms polymeric aminoborane nanoparticles that are white non-crystalline BN nanoparticles of 50~100 nm in diameter. The presence of these BN nanoparticles following the synthesis has been hampering the implementation of h-BN to various applications. Therefore, it is quite important to grow a clean and high quality h-BN layer free of BN particles without having to introduce complicated process steps. We have demonstrated a synthesis of a high quality h-BN monolayer free of BN nanoparticles in wafer-scale size of $7{\times}7cm^2$ by using CVD method incorporating a simple filter system. The measured results have shown that the filter can effectively remove BN nanoparticles by restricting them from reaching to Cu substrate. Layer thickness of about 0.48 nm measured by AFM, a Raman shift of $1,371{\sim}1,372cm^{-1}$ measured by micro Raman spectroscopy along with optical band gap of 6.06 eV estimated from UV-Vis Spectrophotometer confirm the formation of monolayer h-BN. Quantitative XPS analysis for the ratio of boron and nitrogen and CS-corrected HRTEM image of atomic resolution hexagonal lattices indicate a high quality stoichiometric h-BN. The method presented here provides a promising technique for the synthesis of high quality monolayer h-BN free of BN nanoparticles.

• Journal of Korea Water Resources Association
• /
• v.48 no.3
• /
• pp.169-183
• /
• 2015

As a basic work for river restoration, analysis on fluvial geomorphological characteristics is made using past and present data to understand close-to-nature geomorphic status. The Miho and the Naesung Rivers are targets of this study. Fluvial geomorphic variables including valley-floor width, sinuosity, bankfull width, channel gradient, bed material size, bankfull discharge and unit stream power are evaluated with dominant processes. Though common sand-bed rivers with similar catchment area, the Miho and the Naesung Rivers are different in terms of valley-floor width, channel shape variables and dominant processes related with longitudinal location. In addition, analyses on interrelationship among the geomorphological variables are carried. Bankfull width is shown to be proportional to bankfull discharge, as is in a rough agreement with the previous studies. Relationship of bankfull discharge and channel gradient shows meandering and braiding are prevalent in the Miho River, whereas the most of the sub-reaches of the Naesung River fall to braiding. Relationship of channel gradient with width-depth ratio indicates dune-ripple processes are dominant in the Miho River, while the Naesung River shows longitudinal diversity from braiding in the downstream sub-reaches to riffle-pool and plane-bed along the upper ones. Analyses based on the past data on a river in a close-to-nature status are thought to be rather reasonable in comparison with those on the same river in a engineered condition.