• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.152-159
• /
• 2014

Urea solution as a reductant of SCR has been widely used to reduce NOx emissions from diesel engine. But it has lots of problems which are freezing at low temperature due to liquid state, deposition of solid formation in the exhaust, dosing device, and complex package such as mixers for uniform concentration of ammonia. In order to overcome these obstacle, ammonium carbonate which is one of solid ammonium materials to produce ammonia gas directly by sublimation process is considered. Simple reactor with visible widow was designed to predict equilibrium temperature and pressure of ammonium carbonate. To simulate real operation conditions under automobile environment, several cycles of heating and cooling condition were settled, two different re-solidification materials were extracted from the reactor and visible window. Analytical study is performed to characterize these unknown materials by XRD(X-Ray Diffraction), FT-IR(Fourier Transform Infrared Spectroscopy), and EA(Elemental Analyzer). From analytical results, re-solidification materials from heating and cooling cycles are very similar to original material of ammonium carbonate.

• Nutrition Research and Practice
• /
• v.10 no.6
• /
• pp.583-589
• /
• 2016

BACKDROUND/OBJECTIVE: Constipation is a condition that can result from intestinal deformation. Because humans have an upright posture, the effects of gravity can cause this shape deformation. Oligosaccharides are common prebiotics and their effects on bowel health are well known. However, studies of the physiological functionality of a product that contains both lactulose and galactooligosaccharides are insufficient. We investigated the constipation reduction effect of a dual-type oligosaccharide, Dual-Oligo, in loperamide-treated rats. MATERIALS/METHODS: Dual-Oligo consists of galactooligosaccharides (15.80%) and lactulose (51.67%). Animals were randomly divided into four groups, the normal group (normal), control group (control), low concentration of Dual-Oligo (LDO) group, and high concentration of Dual-Oligo (HDO) group. After 7 days of oral administration, fecal pellet amount, fecal weight, watercontent of fecal were measured. Blood chemistry, short-chain fatty acid (SCFA), gastrointestinal transit ratio and length and intestinal mucosa were analyzed. RESULTS: Dual-Oligo increased the fecal weight, and water content of feces in rats with loperamide-induced constipation. Gastrointestinal transit ratio and length and area of intestinal mucosa significantly increased after treatment with Dual-Oligoin loperamide-induced rats. A high concentration of Dual-Oligo tended to produce more acetic acid than that observed for the control group, and Dual-Oligo affected the production of total SCFA. Bifidobacteria concentration of cecal contents in the high-concentration oligosaccharide (HDO) and low-concentration oligosaccharide (LDO) groups was similar to the result of the normal group. CONCLUSIONS: These results showed that Dual-Oligo is a functional material that is derived from a natural food product and is effective in ameliorating constipation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.87-90
• /
• 2006

Thermal and gas adsorption properties were measured for Korean earthenware (onggi) as a step to elucidate its role as food preserving container. Thermal conductivity and diffusivity decreased with increase in porosity while heat capacity depended on the raw soil component rather than porosity. Thermal barrier of the earthenware was generally similar to that of glass. The onggi material could sorb or adsorb a limited amount of water vapor, $CO_2$ and ethylene gases (0.0005 g/g, $17{\mu}g/g$, $2.6{\mu}g/g$, respectively). Thermal and gas adsorption properties of onggi seem to provide unique application area for use as food container and packaging.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.19-26
• /
• 2017

The most widely used method for determining the blast effects of explosives is the Trauzl lead block test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a test explosive charged in the cavity of a lead block with defined quantity and size. In this paper, Trazul lead block test and AUTODYN numerical analysis were conducted to evaluate the coupling medium effect of blast hole. The effects of coupling materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The tests were conducted with emulsion explosives. The coupling mediums used as the filling material around a explosive charge were air, sand, water and gelatine. Results of test and numerical analysis showed that expansion of lead block were much more affected by water&gel than by sand and air. The water and gel showed similar results. As expected, the transmitted pressure and dynamic strain was higher in water and gelatine coupled blast hole than in air and sand.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.59-64
• /
• 1996

Acoustic Emission(AE) signals are emitted by a sudden release of strain energy associated with material damage. A multi-channels of LeCroy system and piezoelectric pressure transducers are employed for AE measurement to investigate the roles of AE in the propagation of macro cracks as well as the characteris-tics of AE wave in occurrence, amplitude and dominant frequency with changes in macro loading modes. Deduced crack opening volume of micro cracks varied widely and implies that AE events could be caused by crystal dislocations on a small scale and grain boundary movements on a large scale. Amplitude of first arrival AE wave emitted during mode I test was approximately 3 times higher than those from mixed mode test, while the number of AE count in mode I test was only 25% of mixed mode. It may imply that the total energy required for generation of a given fracture surface is similar regardless in change of macroloading modes.

• Journal of the Korean Society of Earth Science Education
• /
• v.1 no.1
• /
• pp.72-84
• /
• 2008

This study is focused on the main concepts of gravity and geomagnetics which are introduced in the earth science textbooks of high school in 7th curriculum. This study examines the validity and accuracy of the Earth Science textbooks and shows some effective teaching plans by using the latest materials. This study also illustrates the main concepts of gravity and geomagnetics through presenting some effective and practical teaching-learning methods. The results of the study were as follows: First of all, a number of main concepts of six textbooks of high school were selected; the field of gravity, the direction and dimension of gravity, the measurement of gravity, the main reason of gravity anomaly and geoid, earth terrestrial magnetic field, secular variation of goemagnetics. Secondly, most Earth Science textbooks of high school explains the main concepts of the gravity and geomagnetics in similar ways. Those textbooks, however, don't put an emphasis on the essential contents which has been regarded as important thing in terms of the current educational course of study. The high school textbooks also use the material which is too old-fashioned and has some problems of accuracy and validity. Especially, many main concepts of the textbooks and scientific data(such as the direction of gravity, the measurement of gravity, the main reason of gravity anomaly, the use of geoid, secular variation) are different with those of South Korea, In addition, some materials(graphs and diagrams) are very old ones and they don't have authentic information.Finally, Among the various main concepts, some important ideas (the direction of the gravity and the method of measuring gravity, the measurement and use of gravity anomaly, the definition of geoid and secular variation of geomagnetics) should be corrected by showing the latest and authentic materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.159-160
• /
• 2006

A novel approach to the manufacture of biocompatible ceramic scaffold for tissue engineering using micro-stereolithography system is introduced. Micro-stereolithography is a newly proposed technology that enables to make a 3D micro structure. The 3D micro structures made by this technology can have accurate and complex shape within a few micron error. Therefore, the application based on this technology can vary greatly in nano-bio fields. Recently, tissue-engineering techniques have been regarded as alternative candidate to treat patients with serious bone defects. So many techniques to design and fabricate 3D scaffolds have been developed. But the imperfection of scaffold such as random pore size and porosity causes a limitation in developing optimum scaffold. So scaffold development with controllable pore size and fully interconnected shape have been needed for a more progress in tissue engineering. In this paper, bone scaffold was developed by applying the micro-stereolithography to the mold technology. The scaffold material used was HA(Hydroxyapatite) nano powder. HA is a type of calcium phosphate ceramic with similar characteristic to human inorganic bone component. The bone scaffold made by HA is expected, in the near future, to be an efficient therapy for bone defect.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.28-37
• /
• 1999

This investigation is the result of the structural analysis by finite element method and test for considering stress distribution and stress concentration to be generated according to the change of attached shape and method of the bracket to pipe in welding structure. Generally, members that consist structures are subjected to various forces and are jointed each other with a number of bracket. In this case, circular pipe was adapted in order to weld these members easily and to study the optimal design which is used a beam with shape section as main components of the structure, According to attached shape and method, distributed stress on circular pipe is appeared so differently. This may result deeply effects with respect to thickness, material properties. So a study on attaching shape and method of bracket to circular pipe is needed. In this paper, to obtain the maximum equivalent stress or stress concentration was used experimental and F.E.M. analysis. First five parameter was defined with respect to attached a shape and method to circular pipe i.e. the variation of the attached area, the variation of the attached shape, the variation of the attached length, the variation of both directin angles, the variation of the upper angle. Afterward the experimental analysis was practiced as the variation of the both direction angel and the finite element analysis was practiced as each parameters. We can discover stress distribution and stress concentration according to the change of form of bracket. And the result can be referenced for a design of similar structure.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.61-67
• /
• 2015

As the production of palm oil has been increased, the generation of oil palm biomass is also increased and the utilization of the oil palm biomass become more significant topic. One third of the oil palm biomass is empty fruit bunch (EFB) and the other two thirds are oil palm trunks and fronds. However, the effective use of oil palm biomass has not been developed and most of it is discarded near oil palm plants. In this study, we investigated the applicability of EFB to the paperboard mills, as an organic filler. The new organic filler was manufactured in a laboratory by grinding and fractionating dried EFB powder, and its properties were analyzed. The particles of EFB organic filler were larger and more spherical than those of the commercial wood powder. The use of EFB organic filler resulted in a higher bulk of the handsheets with similar trends of physical strength, compared to those made with wood powder. It was concluded that EFB could be used as a raw material to manufacture organic filler for paperboard production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.280-280
• /
• 2010

Semiconductor quantum dots are of great interest for both fundamental research and industrial applications due to their unique size dependant properties. The most promising application of colloidal semiconductor nanocrystals (quantum dots or QDs) is probably as emitters in biomedical labeling, LEDs, lasers etc. As compared to II-VI quantum dots, III-V have attracted greater interest owing to their less ionic lattice, larger exciton diameters and reduced toxicity. Among the III-V semiconductor quantum dots, Indium Phosphide (InP) is a popular material due to its bulk band gap of 1.35 (eV) which is responsible for the photoluminescence emission wavelength ranging from blue to near infrared with change in size of QDs. Nevertheless, in recent years, the exact type of collective properties that arise when semiconductor quantum dots (QDs) are assembled into two- or three-dimensional arrays has drawn much interest. The term "uantum dot solids" is used to indicate three-dimensional assemblies of semiconductor QDs. The optoelectronic properties of the quantum dot solids are known to depend on the electronic structure of the individual quantum dot building blocks and on their electronic interactions. This paper reports an efficient and rapid method to produce highly luminescent and monodisperse quantum dots solution and solid through fabrication of InP thin films. By varying the molar concentration of Indium to Ligand, QDs of different size were prepared. The absorption and emission behaviors were also studied. Similar measurements were also performed on InP quantum dot solid by fabricating InP thin films. The optical properties of the thin films are measured at different curing temperatures which show a blue shift with increase in temperature. The dielectric properties of the thin films were also investigated by Capacitance-voltage(C-V) measurements in a metal-insulator-semiconductor (MIS) device.