• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.1
• /
• pp.50-56
• /
• 2003

Turnover rate of applied rice straw and rice straw compost in a rice paddy soil under the flooding and intermittent irrigation was studied. The chambers in duplicate were either planted or unplanted with rice. For planted chambers, the turnover rate to methane under the flooding increased with freshness of organic materials applied: 14.9% for RS5 (rice straw applied in May), 9.5 % for RS2 (rice straw incorporated in February), and 4.0% for RSC (rice straw compost amended in May). Similar trend was found in turnover rate to methane under the intermittent irrigation: 9.8% for RS5, 5.5% for RS2, and 2.1% for RSC. For planted chambers, turnover rate to methane under the flooding was generally 1.64 times higher than that under the intermittent irrigation. In contrast, for unplanted chambers, the turnover rate to methane under the flooding increased with freshness of organic materials applied: 8.7% for RS5, 3.3% for RS2, and 3.0% for RSC. Similar trend was observed in chambers under the intermittent irrigation: 5.4% for RS5, 3.0% for RS2, and 1.4% for RSC. For unplanted chambers, the turnover rate to methane under the flooding was generally 1.52 times higher than that under the intermittent irrigation.

• Journal of Conservation Science
• /
• v.19
• /
• pp.43-56
• /
• 2006

We checked the conditions and material properties after producing the lime finishing layers with a mortar mix of processed lime. In addition, we reproduced the lime finishing layers of the Koguryo Tomb Murals, colored the layers with a few different techniques and identified the characteristics for each painting technique. As a result of the experiment, we could infer the producing techniques as well as teaming the conditions and properties of the lime finishing layers of the Koguryo tomb murals, and examined the maintenance of the lime finishing layers. Of those samples produced under various conditions, the layers of slaked lime, which were obtained after being hydrated underground for a long time, showed quite a good condition. Thus the slaked lime mixes produced through particular hydration methods are judged to increase the maintenance of the lime finishing layers of the Koguryo Tomb Murals. Mostly, the paints of Koguryo Tomb Murals indicated that they have similar conditions with the samples produced with a secco method. In addition, Considering the compositional forms of the painting layers and the boundary layers which formed between the painting layers and the finishing layers, we can verify that, in some cases, the conditions of the painting layers of the Koguryo tomb murals are similar to those which were produced with a combination of fresco and secco.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.35-50
• /
• 2017

This study is to see the recovery effect of the Deltacon method by investigating the amount of sand deposition, the topographical cross section and the vegetation structure; and to derive the effective recovery method of coastal erosion area. The target areas of this study include Jinri coastal dune, Bajireum coastal dune and Seopori coastal dune in Deokjeok-do Island, Ongjin-gun, Incheon. In order to assess the current status of the coastal erosion area recovery, the soil profile structure map was prepared on the site and then the amount of sand deposition within 1m was calculated indoors. The vegetation recovery status of the costal erosion area was assessed via the analyses of the topographical profile structure and the plant community structure, and we aim to derive the effective recovery plan of the Deltacon method with the results. With the Deltacon method, structures with ductile material, special non-woven fabric bags filled with soil and vegetation can be performed therefore the structuralstability and prevention of sand erosion can be achieved. The amounts of sand deposition of Bajireum coastal dune, Seopori costal dune and Jinri costal dune were calculated $0.98{\sim}2.54m^3$, $1.02{\sim}2.96m^3$, and $0.27{\sim}0.75m^3$, respectively, and it is considered that the costal erosion recovery is actively performed for Bajireum costal dune and Seopori costal dune. The analysis results of vegetation structures by topography show that the installation of the send collecting net in steep areas has been highly effective and the Deltacon-constructed target areas have been restored to vegetation and the costal dune, which is similar to the natural dune. The investigation of the plant community structure in Deokjeok-do Island costal dune, Incheon displayed similar research results of the existing costal dune flora and confirmed the emergence of Lathyrus japonicus, Carex kobomugi, Elymus mollis, Vitex rotundifolia, and Calystegia soldanella and others. In order to carry out further effective recovery with the Deltacon method, improvements to rootage of herbaceous vegetation are needed in areas without foredune herbaceous vegetation, and continuos maintenance & management monitoring of connected windbreak forest to costal dunes are also necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.383-394
• /
• 2014

The surface sediments from the manganese nodule exploration area of Korea in the Clarion-Clipperton fracture zone were investigated to understand the resource potential of and emplacement mechanism for rare earth elements (REEs). The sediments are categorized into three lithological units (Unit I, II and III from top to bottom), but into two groups (Unit I/II and Unit III) based on the distribution pattern of REEs. The distribution pattern of REEs in Unit I/II is similar to that of Post-Archean Australian Shale (PAAS), but shows a negative Ce anomaly and enrichment in heavy REEs (HREEs). In Unit III, the HREE enrichment and Ce anomaly is much more remarkable than Unit I/II when normalized to PAAS, which are interpreted as resulting from the absorption of REEs from seawater by Fe oxyhydroxides that were transported along the buoyant plume from remotely-located hydrothermal vents. It is supported by the PAAS-normalized REE pattern of Unit III which is similar to those of seawater and East Pacific Rise sediments. Meanwhile, the PAAS-normalized REE pattern of Unit I/II is explained by the 4:1 mixing of terrestrial eolian sediment and Unit III from each, indicating the much smaller contribution of hydrothermal origin material to Unit I/II. The studied sediments have the potentiality of a low-grade and large tonnage REE resource. However, the mining of REE-bearing sediment needs a large size extra collecting, lifting and treatment system to dress and refine low-grade sediments if the sediment is exploited with manganese nodules. It is economically infeasible to develop low-grade REE sediments at this moment in time because the exploitation of REE-bearing sediments with manganese nodules increase the mining cost.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.79-89
• /
• 2003

The purpose of this study is to investigate appropriate environmental factors when domestic waste is decomposed as aerobic digestion. So stabilization degree was measured after the waste is mixed as certain rates and water content was controlled by 55% and 60%. Variation of VS showed food waste in reactors of number 1, 2, 3, 4 and 5 was decomposed fully except reactor of number 6. Decomposition degree of VS in reactors of number 1, 2, 3 and 4 was not different high because Vinyl and plastic inserted played role bulking agent in reactor number 1, 2, 3 and 4. In reactors, maximum temperature indicated $57{\sim}59^{\circ}C$ and temperatures in reactors 1, 2, 3 and 4 were higher and remained longer than in reactor 5 and 6 for 2~4 days. Variation of $CO_2$ was similar to that of VS. The reduction rate of water content was low because moisture generated by oxidation fever of microorganism did not evaporated well. pH was low in the beginning of the reaction however, as time passed, it increased slightly and remained regular pattern. EC and C/N showed the same pattern as pH. Settlement and weight reduction rates were similar to the factors above. Reactor 1, 2, 3, and 4 showed higher settlement and weight reduction rate than reactor 5 and 6.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.185-195
• /
• 2011

Aircraft-related accidents cause mass casualties and major material damages. At present, runway-related accidents in our country account for 28% of all air accidents. Furthermore, internationally 33% of all air accidents is connected with runway. To prevent these accidents, FAA mandates the installation of aircraft rapid arresting system(ARAS) at the runway end safety areas which do not meet the FAA requirements. Even if the areas satisfy the conditions, FAA recommends the installation of ARAS to ensure the safety. In accordance of the international affairs, the domestic studies for ARAS are in progress and the legal formalities for domestic adoption of ARAS is under way. In this study, we analyzed the stopping distance, drag force, vertical force and tire penetration of runway overrun to assess the performance of ARAS reasonably by using two different kinds of analysis programs. The first is ARRESTOR program adopted by FAA, and the second is LS-DYNA which is available for 3-dimensional nonlineal dynamic analysis. As a result, analytically the stopping distances between two programs are similar. The drag force is rather different, but the tendencies are similar. Later on, the 3-dimensional simulation analysis considering various air-craft condition and properties of packaging materials is necessary. In addition, ongoing development of simulation analysis program is required for more accurate analistic results.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.2
• /
• pp.163-173
• /
• 2012

A connection composed of a circular hollow structural section (HSS) has complicated details, and exhibits a very complex local deformation when it reaches the yield stress. Given these circumstances, proposing a simple design equation considering local deformation is difficult. The design equations of the Korea Building Code (KBC 2009) for HSS joints are simple and are very similar to those of the AISC. These design equations limit the maximum yield stress up to 360MPa and yield ratio (yield strength/tensile strength) up to 0.8. This means that the material with yield strength exceeding 360MPa could be used after verification based on the test or rational analysis for the similar connection. This paper introduces an experimental program and finite element analysis (FEA) for the circular hollow section (CHS) with a transverse gusset plate made of high-strength steel (HSB600) or structural steel (SS400) when the joints are subjected to lateral force. Comparison of the design equations with the results of FEA and test may be used for the modification of the design equations.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.5-19
• /
• 2014

In this study, the structural analysis is performed on the method of shallow block and deep cement mixing pile, and then their characteristics and associated behaviors were analyzed. In the case of continuous beam analysis, the predicted settlement was very small, and shear force and bending stress are somewhat overestimated. The frame method is similar to numerical analysis in the internal force shallow block and long pile, but because the settlement of pile is underestimated, the additional calculation using the reaction of the long pile is necessary. For soil arching method and piled raft foundation method, the excessive axial force of long pile was predicted because the load sharing of pile is very large compared to the other methods. In the behavior of the shallow block and deep pile method, the settlement of shallow block and contact pressure are much in the center than the edge. In the estimating method considering the interaction between improved material and ground, the load sharing of the soil-cement pile ranges from 20% to 45%, and the stress ratio is 2.0~5.0 less than piled DCM. The maximum member forces at the boundary conditions of pile head are similar, but in fixed head the axial force and vertical displacement are different in accordance with pile arrangement.

• Journal of Periodontal and Implant Science
• /
• v.39 no.sup2
• /
• pp.223-230
• /
• 2009

Purpose: Synthetic bone products such as biphasic calcium phosphate (BCP) are mixtures of hydroxyapatite (HA) and ${\beta}$-tricalcium phosphate (${\beta}$- TCP). In periodontal therapies and implant treatments, BCP provides to be a good bone reconstructive material since it has a similar chemical composition to biological bone apatites. The purpose of this study was to compare bone regeneration capacity of two commercially available BCP. Methods: Calvarial defects were prepared in sixteen 9-20 months old New Zealand White male rabbits. BCP with HA and ${\beta}$- TCP (70:30) and BCP with Silicon-substituted hydroxyapatite (Si-HA) and ${\beta}$-TCP (60:40) particles were filled in each defect. Control defects were filled with only blood clots. Animals were sacrificed at 4 and 8 week postoperatively. Histomorphometric analysis was performed. Results: BCP with HAand ${\beta}$- TCP 8 weeks group and BCP with Si-HA and ${\beta}$- TCP 4 and 8 weeks groups showed statistically significant in crease (P <0.05) in augmented area than control group. Newly formed bone area after 4 and 8 weeks was similar among all the groups. Residual materials were slightly more evident in BCP with HA and ${\beta}$- TCP 8 weeks group. Conclusions: Based on histological results, BCP with HA and ${\beta}$- TCP and BCP with Si-HA and ${\beta}$- TCP appears to demonstrate acceptable space maintaining capacity and elicit significant new bone formation when compared to natural bone healing in 4 and 8 week periods.