• KSTLE International Journal
• /
• v.3 no.1
• /
• pp.38-42
• /
• 2002

Diamond-like Carbon(DLC) films were deposited on Si wafers by an RF-plasma-assisted CVD using CH$_4$gas. Tribological tests were conducted with the use of a rotating type ball on a disk friction tester with dry air. This study made use of four kinds of mating balls that were made with stainless steel but subjected to different annealing conditions in order to achieve different levels of hardness. In all load conditions, testing results demonstrated that the harder the mating materials, the lower the friction coefficient was. The friction coefficients were fecund to be lower with austenite mating balls than with fully annealed martensite balls. Conversely, the high friction coefficient found in soft martensite balls appeared to be caused by the larger contact area between the DLC film and the ball. The wear tracks on DLC films and mating balls could prove that effect. Measuring the wear track of both DLC films and mating balls revealed a similar tendency compared to the results of friction coefficients. The wear rate of austenite balls was also less than that of fully annealed martensite balls. Friction eoefficients decrease when applied leads exceed critical amount. The wear track on mating balls showed that a certain amount of material transfer occurs from the DLC film to the mating ball during a high friction process. Raman Spectra analysis Showed that the transferred materials were a kind of graphite and that the contact surface of the DLC film seemed to undergo a phase transition from carbon to graphite during the high friction process.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.21-34
• /
• 2016

In the present study, we applied various machine learning techniques comparatively for prediction of subsurface structures based on multiple secondary information (i.e., well-logging data). The machine learning techniques employed in this study are Naive Bayes classification (NB), artificial neural network (ANN), support vector machine (SVM) and logistic regression classification (LR). As an alternative model, conventional hidden Markov model (HMM) and modified hidden Markov model (mHMM) are used where additional information of transition probability between primary properties is incorporated in the predictions. In the comparisons, 16 boreholes consisted with four different materials are synthesized, which show directional non-stationarity in upward and downward directions. Futhermore, two types of the secondary information that is statistically related to each material are generated. From the comparative analysis with various case studies, the accuracies of the techniques become degenerated with inclusion of additive errors and small amount of the training data. For HMM predictions, the conventional HMM shows the similar accuracies with the models that does not relies on transition probability. However, the mHMM consistently shows the highest prediction accuracy among the test cases, which can be attributed to the consideration of geological nature in the training of the model.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.652-660
• /
• 2015

To study the bearing characteristics of glass fiber reinforced glulam for structural design, bearing strength tests were performed. Bearing loads were applied in the direction parallel to the grains, and the holes were prepared in such a way that the bolts would bear and support all the layers. The yield bearing strengths of the glass fiber reinforced glulam were found to be similar to those of the non-reinforced glulam, and were almost constant regardless of increases in bolt diameter. The ratio of the experimental yield bearing strength to the estimated bearing strength according to the suggested equation of the Korea Building Code and National Design Specification was 0.91~1.03. For the non-reinforced glulam and the sheet glass fiber reinforced plastic glulam, the maximum bearing load was measured according to the splitting fracture of specimens under bolt. The textile glass fiber reinforced glulam underwent only an embedding failure caused by the bearing load. The failure mode of reinforced glulam according to bearing load will influence the failure behavior of bolted connection, and estimating the shear yield strength of the bolted connection of the reinforced glulam is necessary, not only by using the bearing strength characteristics but also using the fracture toughness of the reinforced glulam.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.555-562
• /
• 2014

Characteristics of carbonized fiberboard such as chemical materials absorption, electromagnetic shielding, and electrical and mechanical performance were determined in previous studies. The carbonized board therefore confirmed that having excellent abilities of these characteristics. In this study, the effect of density on physical properties and sound absorption properties of carbonized fiberboards at $800^{\circ}C$ were investigated for the potential use of carbonized fiberboards as a replacement of conventional sound absorbing material. The thickness of fiberboards after carbonization was reduced 49.9%, 40.7%, and 43.3% in low density fiberboard (LDF), medium density fiberboard (MDF), and high density fiberboard (HDF), respectively. Based on SEM images, porosity of carbonized fiberboard increased by carbonization due to removing adhesives. Moreover, carbonization did not destroy structure of wood fiber based on SEM results. Carbonization process influenced contraction of fiberboard. The sound absorption coefficient of carbonized low density fiberboard (c-LDF) was higher than those of carbonized medium density fiberboard (c-MDF) and carbonized high density fiberboard (c-HDF). This result was similar with original fiberboards, which indicated sound absorbing ability was not significantly changed by carbonization compared to that of original fiberboards. Therefore, the sound absorbing coefficient may depend on source, texture, and density of fiberboard rather than carbonization.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.21-29
• /
• 2005

Increase in the utilization rate of recycled paper has significantly increased the problem associated with stickies. Despite the effort to eliminate contaminants from recycled furnishes, stickies are still the most serious obstacle in using recycled paper. The amount of micro stickies that are too small to be eliminated by screening, tends to increase significantly as the closure level of white water system is increased and the quality of raw material deteriorates. To establish a process efficient in removing micro stickies is strongly required. In this study, the surface characteristic of micro stickies was investigated with contact angle measurement. Surface energies of MCC, PSA film and model micro stickies were 53.37 mN/m, 29.75mN/m, and 29.63mN/m, respectively. This indicates that the surface characteristic of MMS is very similar to PSA. Thus, solvent coating of PSA and evaporation of the solvent provided excellent model micro stickies for flotation experiment.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.990-995
• /
• 2013

In the pursuit of practical usage for Codonopsis lanceolata and development of functional processed food material, the research on the product characterization is being performed through the manufacturing of Yanggaeng which is extracted from the Codonopsis lanceolata skin concentrate. By adding Codonopsis lanceolata skin extracts (0, 40, 60, 80, 100%) to the product, the chemical property characterization and organoleptic test of the produced Yanggaeng are being conducted. The scavenging effects on DPPH free radical have a significant proportional relationship with the addition of Codonopsis lanceolata skin extracts as 61.30 for 100% added group as compared with 52.72 for the null-addition group. It is considered that the antioxidative activity increases with the addition of the Codonopsis lanceolata skin extraction as the SOD similar activity rate was increased to 49.23% from 39.31%, the flavor preference was ranked as 80%>60%>0%>100%>40% showing that 60~80% of Codonopsis lanceolata skin extraction addition seems to be the proper amount.

• KSBB Journal
• /
• v.19 no.1
• /
• pp.33-37
• /
• 2004

Succinic acid is of interested as the raw material of biodegradable polymer. In this study, succinic acid was separated by reactive extraction using amine extractants such as TOA (trioctylamine) and Aliquat 336. The extractability of TOA for succinic acid was higher than that of Aliquat 336. The distribution of succinic acid into organic phase was decreased with increasing pH in aqueous phase. However, the effect of pH on the extractability of Aliquat 336 was little. In the case of maleic acid which has similar structure to succinic acid, the extractability for maleic acid was higher than that for succinic acid. It was mainly due to the difficulty of deprotonation of second carboxylic group by intramolecular hydrogen bonding.

• Journal of Korean Institute of Fire Investigation
• /
• v.11 no.1
• /
• pp.63-73
• /
• 2007

In this paper, we discussed the hazard of ignition on the bimetal type thermostat molded by phenol resin with case study and accelerated aging test. We experimented three type thermostats molded by phenol resin which are used on hot/cold water dispenser. On the case study, the thermostat was origin of 6re and dry tracking occurred around it's moveable contactor. On the accelerated aging test, the more thermostat was switched, the more damaged it become. One of the A-type thermostats that is similar type on the case study fired around moveable contactor. We therefore confirmed that the tracking around the moveable contactor of bimetal type thermostat molded by phenol resin could be origin of fire and it is available to reduce of fire that using noncombustible material for molding of bimetal type thermostat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.1 no.1
• /
• pp.21-25
• /
• 1988

The rumen degradability of rice straw (untreated, urea-sprayed, urea-treated), grasses (Panicum maximum, Pennisetum clandestinum) and rice bran was compared. The mean in vivo organic matter digestibility of the untreated (US), urea-supplemented (SS) and urea-ammonia treated (TS) rice straw were 50.9, 53.9 and 57.4%, respectively. Rice bran contained extremely high levels of acid-insoluble ash (25.2% DM), and its OMD was 36.1%. Grasses had OMD values around 66%. Degradability measurements were performed with buffaloes using the nylon bag technique. The organic matter (OM) disappearance data were fitted to an model which was used to describe degradation pattern. The mean potentially degradable fraction for US, SS and TS was 61.5, 61.9 and 69.4%, respectively. Urea-ammonia treatment increased both the amount of OM degraded and the rate at which it was degraded in the rumen. Both grasses had similar values for degradable fraction (around 65%) and for rate constant for degradation (0.04). Rice bran contained high proportions of readily soluble material (23.9%), but the degradable OM fraction was only 13.2%. The low quality of rice bran is attributed to the contamination of rice hulls during processing.

• BMB Reports
• /
• v.36 no.6
• /
• pp.597-602
• /
• 2003

Acid phosphatases (APases) play a role in the release of phosphate in organic complexes in soil. We investigated tissue- and isoform-specific responses of APases to phosphorus (P) deficiency in three rice genotypes; Dasan-byeo, Sobi-byeo, and Palawan. The levels of shoot APase activity per protein were similar in the three genotypes. They significantly decreased with P deprivation that was longer than seven days. Root APase activity per protein was two- to three-fold higher in Dasan than in Sobi and Palawan. In all genotypes the APase activity increased in P-deficient plants, but the increase was higher in Sobi and Palawan. After 21 days of P deprivation, secreted APase activity increased more than eight-fold in Dasan and two-fold in Sobi and Palawan. Isoform profiles of shoot and root APases were most diverse in Dasan. The activities of the major isoforms in P-deficient shoots decreased in all three genotypes. Depending on the genotypes, further increases in constitutive isoforms and new induction of one to four isoforms occurred in P-deficient roots. The results indicate that tissue and genotype differences in the response of APase to P deficiency are primarily facilitated by the different responses of the isoforms.