• Nutrition Research and Practice
• /
• v.4 no.6
• /
• pp.486-491
• /
• 2010

Tight control of blood glucose is the most important strategy for the treatment of diabetes mellitus. Here, we investigated the beneficial effects of Welsh onion on fasting and postprandial hyperglycemia. Inhibitory activities of hot water extracts from the green stalk and white bulb, which are the edible portions of the Welsh onion, and the fibrous root extract against yeast ${\alpha}$-glucosidase were measured in vitro. To study the effects of Welsh onion on postprandial hyperglycemia, a starch solution (1 g/kg) with and without Welsh onion fibrous root extract (500 mg/kg) or acarbose (50 mg/kg) was administered to streptozotocin-induced diabetic rats after an overnight fast. Postprandial plasma glucose levels were measured and incremental areas under the response curve were calculated. To study the hypoglycemic effects of chronic feeding of Welsh onion, five-week-old db/db mice were fed an AIN-93G diet or a diet containing either Welsh onion fibrous root extract at 0.5% or acarbose at 0.05% for 7 weeks after 1 week of adaptation. Fasting plasma glucose and blood glycated hemoglobin were measured. Compared to the extract from the edible portions of Welsh onion, the fibrous root extract showed stronger inhibition against yeast ${\alpha}$-glucosidase, with an $IC_{50}$ of 239 ${\mu}g/mL$. Oral administration of Welsh onion fibrous root extract (500 mg/kg) and acarbose (50 mg/kg) significantly decreased incremental plasma glucose levels 30-120 min after oral ingestion of starch as well as the area under the postprandial glucose response curve, compared to the control group (P < 0.01). The plasma glucose and blood glycated hemoglobin levels of the Welsh onion group were significantly lower than those of the control group (P < 0.01), and were not significantly different from those fed acarbose. Thus, we conclude that the fibrous root of Welsh onion is effective in controlling hyperglycemia in animal models of diabetes mellitus.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.1
• /
• pp.6-9
• /
• 2014

This study was for the investigation of the stability of purified bee venom (PBV) during the treatment in the pH range from pH2 to pH9 for 24 hours, respectively. Changes of components and physiological functionalities in PBV were by evaluated silver staining, and melittin contents were measured by liquid chromatography. The antimicrobial activity against bacteria by minimum inhibitory concentration (MIC) and effect of the cell regeneration were measured by 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl tetrazolium bromide (MTT) assay using human dermal fibroblast (HDF) cell. The main proteins such as melittin and phospholipase $A_2$ showed no characteristic changes. The antimicrobial activity and effect of cell regeneration showed no difference from pH2 to pH9. From this study, we suggest that components and physiological functionalities of PBV against treated pH were kept stability at from pH2 to pH9.

• Journal of agricultural medicine and community health
• /
• v.43 no.2
• /
• pp.97-107
• /
• 2018

Objectives: The purpose of this study was to examine the success and barrier factors of hypertension registration program in Goseong community health center proven improving hypertension treatment rate by community health survey. Methods: We conducted a qualitative research using both a performance review of the program and in-depth interviews with the 8 operators who had worked for this program in April 2018. Results: In this study, the success factors were analysed as follows: First, the willingness to improve health indicators, second, the implementation of large-scale projects, third, improving program processes, fourth, continuous efforts for achievement of goal, not output or reward, and the barrier factors are as follows. First, uniform output monitering, second, evaluation after the fashion of contest, third, the confusing concept of an integrated health promotion program, fourth, the attitude of the person worried with task change. Conclusions: This study suggested that the health community health center should follow the basic principles of public health, and the central government should introduce a health policy of decentralization.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.71-78
• /
• 2014

Gamma irradiation and its convergence with nano-silver particles and sodium dichloroisocyanurate (NaDCC) were investigated to inhibit germination and mycelial growth of Botrytis elliptica, the pathogen of lily leaf blight. In addition, the same treatments were studied on the process of disease development with detached leaf of lily cv. Siberia. Spray inoculation, which is closer to natural infection than wound inoculation, can be a way to investigate infection ability of the treated pathogen. The irradiating dose required to reduce the population by 90%, $D_{10}$, was 526 Gy irradiating with 0-2000 Gy gamma ray on the conidial suspension as well as the growing mycelia. Even at 2000 Gy, the mycelium was not killed but just delayed its growth at 1-2 days behind. Convergent treatment with 40 mg/l of NaDCC just before 200 Gy gamma irradiation was the best way to decrease the conidial germination about 1/1000 times. The control values of gamma irradiation were 23% and 19.5% at wound inoculation and spray inoculation, respectively. On wound-inoculation, the control value of NaDCC only was 89%, and that of NaDCC convergent with 200 Gy gamma irradiation was 32%. On sprayinoculation, the highest control value was NaDCC at 50%, and that of NaDCC convergent with gamma irradiation was 24%.

• Korean Journal of Head & Neck Oncology
• /
• v.12 no.2
• /
• pp.169-176
• /
• 1996

Tuberculous cervical lymphadenitis is still an important cause of neck mass in Korea. Tuberculosis is an important differential diagnosis in patients of cervical lymphadenopathy. Rapid and sensitive test for the diagnosis of tuberculosis is essential for the approapiate treatment. Up to now, conventional diagnostic methods for M. tuberculosis were acid-fast bacilli(AFB) stain and culture of M. tuberculosis. The direct microscopic examination of AFB by Ziehl-Neelsen stain is rapid, but often negative. The culture for M. tuberculosis is time-consuming, taking 4 to 8 weeks. Recently various methods to detect Mycobacterial DNA, including PCR and restriction fragment length polymorphism(RFLP) analysis have been reported. Here we represent a simple method for the confirmation of M. tuberculosis and exclusion of the other Mycobacterial species by RFLP analysis and silver staining of polyacrylamide gel electrophoresis after nested PCR for a repetitive DNA sequence(IS986) specific for M. tuberculosis from fresh or paraffin-embedded biopsy specimens. This result leads us to conclude that this method is simple, rapid and possibly applicable to confirm M. tuberculosis and rule out the other Mycobacteria species from the clinical specimens in the clinical laboratories.

• Conservation Science in Museum
• /
• v.20
• /
• pp.13-30
• /
• 2018

Ancient metal objects with inlaid designs were mainly decorated using the wire inlay technique in which "V"- or "U"-shaped grooves were cut in a metal object and then filled with gold or silver. Previous studies on ancient metal objects featuring wire inlay generally attempted to ascertain the inlay techniques applied by examining photomicroscopes acquired during conservation treatment. However, they had limitations when examining wire inlay technique to the minute details. Wire inlay technique can be better investigated by enlarging X-ray films of relics using stereoscopic microscopy under transmitted light. The core processes of the wire inlay technique involve cutting grooves using a chisel and creating the inlay wires, but researchers hold varying opinions about the two processes. This study analyzed the entirety of the materials able to shed light on the main processes applied in Baekje wire inlay by examining X-ray films of relics through stereoscopic microscopy. This exhaustive research revealed that two types of techniques were used for wire inlay during the Baekje period. One is a plastic process of engraving dotted lines using a chisel and is found mostly in objects from the Cheonan and Gongju areas. The other is a cutting process that incises fine lines and was used mostly in relics from the Osan, Seosan, and Wanju areas. It is likely that the Baekje wire inlay techniques feature regional differences because the respective techniques were used or introduced by different groups of people.

• Korean Journal of Veterinary Research
• /
• v.40 no.1
• /
• pp.117-129
• /
• 2000

This study was carried out to examine proliferative activity and expression of c-myc oncoprotein and p2lras in normal and preneoplastic rat livers induced by an in vivo mid-term chemical carcinogenesis assay. Sixty, six-week-old male specific pathogen free Sprague-Dawley male rats were randomly divided into five groups. Group I was received a single intraperitoneal(IP) dose(200mg/kg) of diethylnitrosamine(DEN). Group 2(10 rats) was operated partial hepatectomy(PH) and Group 3 was received IP(200mg/kg) DEN, fed two weeks later with 500ppm of phenobarbital(PB). Group 4 was received IP(200mg/kg) DEN, fed two weeks later 500ppm(PB) and PH at week 3 after the onset of experiment. While group 5(20 rats) was not treated and used as a control group. All the rats were sacrificed at age 14 weeks except 10 rats from group 5 were sacrificed at the onset of experiment. Livers of all rats were examined for 5-bromo-2'-deoxyuridine(BrdU) incoporation, proliferating cell nuclear antigen(PCNA), silver-binding nucleolar organizer regions(AgNORs) counts per nucleus and expression of c-myc oncoprotein and p21ras. Both the number and area of the preneoplastic lesions were significantly(p<0.01) compared to other groups. A significant(p<0.01) increase in immunoreactive cells were detected in preneoplastic hepatocytes in Groups 3 and 4 by PCNA and BrdU immunohistochemical stain. The number of the positive cells were significantly(p<0.05) lower in normal 14-week-old rats than those of 6-week-old rats. The results showed that proliferative activity of the hepatocytes was increased by treatment with DEN, PH and PB. Meanwhile, AgNORs counts per nucleus were significantly(p<0.05) increased in the preneoplastic hepatocytes of rats in both groups 3 and 4. The expression of c-myc oncoprotein and p21ras were more readily localized within the hepatic preneoplastic lesions such as hyperplastic nodules. Especially, group 4 showed significantly (p<0.05) overexpressed levels compared to groups 1 and 3. These findings suggest that PCNA, BrdU and AgNORs are significantly increased and c-myc oncoprotein and p21ras are significantly overexpressed in hepatic preneoplastic lesions induced by mid-term carcinogenesis. So these parameters can be an effective markers for hepatic prencoplastic lesions.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.273-282
• /
• 2009

As a result of investigating research papers concerning the metal bound rim decoration on four pieces of 'Bowl, white porcelain with impressed floral design and sliver bound rim' and one piece of 'Bowl, white porcelain with sliver bound rim' from among the Jingdezhen white porcelain, which are Sinan remains that are kept in a National museum of Korea. It was found that the material of the bound rim was not silver but tin, and lacquer was used as glue. Based on such a scientific analysis, this study conducted a reproduction test of the manufacturing technique and the bonding method of the metal bound rim attached to the upper tip of the china ware. As a way of reproducing the bound rim, the study was able to discover the best method in terms of the avoidance of loss of materials and the workability out of various cutting methods for tin plates, and it also discovered that the use of lacquer in mixture with soil showed a better workability than the use only of a lacquer ingredient in a test of the bonding method of a metal bound rim using lacquer. Also, in the test of a drying method, a bonding method after drying within a short time at a relatively high temperature was found to be more effective than the drying method after humidifying at a normal temperature, which is used in traditional lacquer ware preservation treatment.

• Composites Research
• /
• v.28 no.4
• /
• pp.155-161
• /
• 2015

A composite structure was fabricated with embedded impact detection capabilities for applications in Structural Health Monitoring (SHM). By embedding sensor functionality in the composite, the structure can successfully perform impact localization in real time. Smart resin, composed of $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,\;Ti)O_2$ (PNN-PZT) powder and epoxy resin with 1:30 wt%, was used instead of conventional epoxy resin in order to activate the sensor function in the composite structure. The embedded impact sensor in the composite was fabricated using Hand Lay-up and Vacuum Assisted Resin Transfer Molding(VARTM) methods to inject the smart resin into the glass-fiber fabric. The electrodes were fabricated using silver paste on both the upper and bottom sides of the specimen, then poling treatment was conducted to activate the sensor function using a high voltage amplifier at 4 kV/mm for 30 min at room temperature. The composite's piezoelectric sensitivity was measured to be 35.13 mV/N by comparing the impact force signals from an impact hammer with the corresponding output voltage from the sensor. Because impact sensor functionality was successfully embedded in the composite structure, various applications of this technique in the SHM industry are anticipated. In particular, impact localization on large-scale composite structures with complex geometries is feasible using this composite embedded impact sensor.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.27-35
• /
• 2008

Recently, many studies have reported the fact that an excessively accumulated psychological and physical burden induced from physical labor conducted routinely in home and industry can be one of main reasons of musculoskeletal disorders in the working population. This fact makes increase interests in studies to reduce a risk of musculoskeletal disorders through grafting ergonomic considerations on working environment. However, there are currently limited methodologies in quantitative evaluations of new ergonomic suggestions to reduce a risk of musculoskeletal disorders. The current study is therefore performed to evaluate quantitatively effects of a design of washing machine as a new ergonomic suggestion onto prevention of musculoskeletal disorders, through application of a biomechanical evaluation methodology. For this, three-dimensional motion analysis by using musculoskeletal models with Rapid Entire Body Assessment (REBA), which has been generally used for a simple evaluation of a degree of harmfulness of the human body at specific working postures to be considered, was performed. The results of REBA did not give us enough information and their results were somewhat simple and inaccurate, but the results of the three-dimensional motion analysis give us enough information such as alteration of main muscle forces and joint moments required during washing work. All results showed that the main muscle strengths and joint moments were decreased effectively for reduction of a risk of musculoskeletal disorders during the washing work with newly designed washing machine evaluated in the current study, compared with those generated during the washing work with general washing machine. From these results, it can be concluded that a risk of the musculoskeletal disorders, which may be induced by a repetitive washing work, may be reduced through using the washing machine designed ergonomically and newly. Also, it is thought that if our ergonomic design can be applied for improvement of working environment in lifting and laying works conducted repeatedly for a treatment work of goods, which have a strong resemblance to the behaviors generated frequently during the washing work, a possibility of occurrence of the musculoskeletal disorders by the lifting and laying works may be reduced highly.