• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.1-9
• /
• 2011

티타니아, 바나디아, 지르코니아, 세리아를 고정한 실리카에 백금을 담지한 후 과산화수소로 처리하여 제조한 백금 촉매에서 산화물 고정과 과산화수소 처리가 백금의 분산 상태 및 일산화탄소 산화반응에서 이들의 촉매 활성에 미치는 영향을 조사하였다. 산화물을 고정하고 과산화수소로 처리하면 실리카에도 백금이 잘 분산될 수 있음을 XRD, TEM, EXAFS, XPS, 일산화탄소 화학흡착 방법으로 검증하였다. 그러나 일산화탄소의 흡착성질과 일산화탄소 산화반응에서 촉매 활성은 고정한 산화물 종류에 따라 상당히 달랐다. 티타니아, 지르코니아, 세리아를 실리카에 고정하고 과산화수소로 처리하여 제조한 백금 촉매에서는 백금의 분산도가 높아져서 일산화탄소 산화반응에서 활성이 증진되었다. Pt-O-Zr 결합이 생성되어 백금의 분산도가 크게 향상된 지르코니아 고정 백금 촉매에서 산화물 고정과 과산화수소 처리로 인한 활성 증진 효과가 가장 컸다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1212-1215
• /
• 2004

Diffraction modes of holographic grating were fabricated with polyurethane acrylates(PUA). Two types of silica (AEROSIL 200 and AEROSIL R812) were added to reduce the shrinkage of polymer matrix. It was founded that shrinkage of PUA composite film was reduced with the addition of silica. HPDLC based PUA/silica composite also showed high diffraction efficiency. The morphology of the resultant gratings was analyzed by using scanning electron microscopy(SEM) and Tg of the polymer matrix by dynamic mechanical thermal analysis(DMTA).

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.175-179
• /
• 2003

For the total description of mechanical behaviors of elastomers, it is necessary to know the so-called rheological constitutive equation i.e. the strain-energy density function (W) in case of elastomers, which necessitates biaxial tensile results of elastic body. This paper first describes the experimental results of biaxial tensile measurements on poly(siloxane) model networks. W was estimated from its differential form i.e. the $1^{st}$ differential of W is stress. The W was found to reproduce the experimental stress-strain results, and the W estimated for silica filled poly(siloxane) networks suggest a different behavior between conventional precipitated silica and in situ formed silica. The difference suggests the different surface property of the two silicas.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1653-1668
• /
• 2005

Assembly of hybrid mesophases through the combination of amphiphilic block copolymers, acting as structuredirecting agents, and silicon sources using low acid catalyst concentration regimes is a versatile strategy to produce large quantities of high-quality ordered large-pore mesoporous silicas in a very reproducible manner. Controlling structural and textural properties is proven to be straightforward at low HCl concentrations with the adjustment of synthesis gel composition and the option of adding co-structure-directing molecules. In this account, we illustrate how various types of large-pore mesoporous silica can easily be prepared in high phase purity with tailored pore dimensions and tailored level of framework interconnectivity. Silica mesophases with two-dimensional hexagonal (p6mm) and three-dimensional cubi (Fm$\overline{3}$m, Im$\overline{3}$m and Ia$\overline{3}$d) symmetries are generated in aqueous solution by employing HCl concentrations in the range of 0.1−0.5 M and polyalkylene oxide-based triblock copolymers such as Pluronic P123 $(EO_{20}-PO_{70}-EO_{20})$ and Pluronic F127 $(EO_{106}-PO_{70}-EO_{106})$. Characterizations by powder X-ray diffraction, nitrogen physisorption, and transmission electron microscopy show that the mesoporous materials all possess high specific surface areas, high pore volumes and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Furthermore, we discuss our recent advances achieved in order to extend widely the phase domains in which single mesostructures are formed. Emphasis is put on the first synthetic product phase diagrams obtained in $SiO_2$-triblock copolymer-BuOH-$H_2O$ systems, with tuning amounts of butanol and silica source correspondingly. It is expected that the extended phase domains will allow designed synthesis of mesoporous silicas with targeted characteristics, offering vast prospects for future applications.

• 대한화학회지
• /
• 제31권1호
• /
• pp.14-24
• /
• 1987

실리카 및 제올라이트의 OH기 또는 교환된 양이온과 CO분자간의 상호작용과 전자구조를 살펴보기 위하여 CNDO/2계산을 행하였다. 실리카의 OH기와 CO분자간의 상호작용에너지는 약 12kcal/mol이었고, 그 결합거리, R(O-H${\cdots}$C)는 2.6${\AA}$이었다. 여러가지의 양이온과 CO분자와의 결합강도는 $H^+ < Na^+ < Li^+$의 순이었는데, 그것은 양이온의 정전기적 장의 세기와 일치하였다. 또한 OH기나 양이온과 결합하고 있는 CO분자의 결합차수는 OH-CO type의 경우를 제외하고는 모두 증가하였다. 제올라이트에 있는 양이온을 떼어내는데 필요한 에너지는 $H^+ > Li^+ > Na^+$의 순이었으며, 이것은 제올라이트의 골격으로부터 양이온으로 이동되는 전하의 양과 관계가 있다.

• 공업화학
• /
• 제27권2호
• /
• pp.190-194
• /
• 2016

Tricyclopentadiene (TCPD)는 차세대 고밀도에너지 연료인 tetrahydrotricyclopentadiene의 전구체로서 중요한 화합물이다. 본 연구에서는 이온성 액체가 담지된 메조포로스 실리카 촉매를 이용하여 dicyclopentadiene 소중합 반응을 통한 TCPD 합성에 관한 연구를 수행하였다. 나노기공의 크기가 다른 대표적인 메조포로스 실리카인 MCM-41과 SBA-15에 이온성 액체(IL)를 함침법을 이용하여 담지하고 소중합 촉매를 제조하였다. 음이온 전구체로 copper(I) chloride (CuCl) 또는 iron(III) chloride ($FeCl_3$), 양이온 전구체로 triethylamine hydrochloride (TEAC) 또는 1-butyl-3-methylimidazolium chloride(BMIC)를 사용하여 4가지 종류의 IL을 메조포로스 실리카에 담지하였다. 이온성 액체가 담지된 메조기공의 실리카를 사용하였을 때 이온성 액체만 사용하였을 때보다 TCPD 수율과 dicyclopentadiene (DCPD)의 전환율 측면에서 우수하였다. 특히, MCM-41에 루이스 산도가 낮은 CuCl계 이온성 액체를 담지할 때 TCPD 수율이 가장 높았다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.309-312
• /
• 2002

The polymer nanocomposites are attracting considerable attention on account of the characteristic properties of nanoparticles have extremely large surface area per a unit mass. Recentry, mica-type silicates like montmorillonite have received a good deal of attention as effective nano-reinforcemen(1), but actually some critical problems such as the difficulties of exfoliation and surface modification, the weak heat-resistance of modifier, and inferior processability due to the increase in melt viscosity have restricted the mass production and various applications of the nanocoposite. (omitted)

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1840-1847
• /
• 2016

The surface of nanosilica and microsilica was modified in order to develop a high voltage insulation material for outdoor application. The modified silicas were well dispersed in an aliphatic cyclic epoxy resin. Dielectric properties were studied for 8 kinds of specimens: 1 kind of neat epoxy, 3 kinds of epoxy/microsilica composites, and 4 kinds of epoxy/microsilica/nanosilica composites. Complex dielectric constants were measured in the range of 10-2~1.2 Hz at room temperature.

• 대한화학회지
• /
• 제56권5호
• /
• pp.591-596
• /
• 2012

Preparation of $AlPMo_{12}O_{40}$ (AlPMo) salts, supported on mesostructured SBA-15 silica, by the reaction deposition strategy causes the formation of isolated AlPMo nanocrystals inside the nanotubular channels. The remarkable characteristic of the SBA-15 structure is that all the cylindrical pores are connected by some small channels. This makes the whole pore system in SBA-15 three-dimensional. We have used 2D hexagonal SBA-15 silicas as hard templates for the nanofabrication of AlPMo salt nanocrystal. The oxidation of alcohols occurs effectively and selectively with $H_2O_2$ as the oxidant. AlPMo salt nanocrystal was used as the catalyst.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.1-7
• /
• 2008

The trend of using more hardwood and recycled fibers, and closing more tightly of the paper mill white water system has resulted in build-up of fines as well as organic and inorganic contaminants in the white water. This changes in papermaking wet end requires developing chemical additive system that provides good fiber retention and drainage in closed white water system. In this study the effect of charge densities and chemical characteristics of microparticle systems consisted of cationic guar gums and anionic colloidal silica sols on drainage and retention have been examined. Results showed that higher charge density of cationic guar gum and anionic colloidal silica sol gave better retention and drainage. Particularly highly structured silica gave greater retention efficiency.