• Elastomers and Composites
• /
• 제37권4호
• /
• pp.258-264
• /
• 2002

본 연구에서는 열처리에 의한 실리카의 표면특성과 실리카/폴리우레탄 복합재료의 기계적 계면물성에 대하여 고찰하였다. 열처리에 의한 실리카의 표면특성은 Fourier Transform-IR(FT-IR), Solid-state 29Si NMR spectroscopy, 그리고 접촉각을 통하여 알아보았으며 실리카/폴리우레탄 복합재료의 기계적 계면물성은 인열에너지 (GIIIC)를 측정하여 관찰하였다. 본 실험결과, 열처리 온도가 증가함에 따라 실리카의 Si-OH가 축합하여 Si-O-Si를 형성하고 표면자유에너지의 비극성 요소가 증가하는 것을 확인할 수 있었다. 이러한 결과로부터, 증가된 실리카의 표면자유에너지의 비극성요소는 폴리우레탄 내에 실리카의 분산성을 향상시켜 결과적으로 실리카/폴리우레탄 복합재료의 기계적 계면물성인 인열에너지가 증가된 것으로 사료된다.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• 분석과학
• /
• 제8권3호
• /
• pp.299-304
• /
• 1995

정지상으로서 N, N'-bispalmtoyl 1, 12-diaza-3, 4:9,10-dibenzo-5, 8-cyclopentadecane (hexadecyl $NtnOenH_4$)-octadecylsilanized silicas(ODS)와 이동상으로 물을 사용하여 Ba(II), Cr(II), Fe(II) 및 Cu(II)의 흡착특성을 조사하였다. 수용액상 Ba(II), Cr(II), Fe(II) 및 Cu(II)의 결합상수와 흡착도를 조사한 결과 그 순위는 Ba(II)$NtnOenH_4$-octadecylsilanized silicas(ODS)에 흡측되는 금속이온의 농도 증가는 cation chelation mechanism에 의해 설명할 수 있었다. 또한 수용액상에서 Ba(II), Cr(II), Fe(II) 및 Cu(II)이 혼합된 용액에서 Cu(II)의 분리효율이 다른 이온들에 비해서 좋게 나타남을 알 수 있었다.

• 공업화학
• /
• 제25권5호
• /
• pp.520-525
• /
• 2014

본 연구에서는 기존 에폭시수지에 에폭시 콩기름(Epoxidized soybean oil : ESBO)과 실란처리 되어진 실리카가 첨가된 에폭시 접착제의 접착특성에 대하여 고찰하였다. 실리카의 표면처리는 실란커플링제인 ${\gamma}$-methacryloxy propyl trimethoxy silane (MPS), ${\gamma}$-glycidoxy propyl trimethoxy silane (GPS), 그리고 ${\gamma}$-mercapto propyl trimethoxy silane (MCPS)을 사용하였다. 실리카 첨가 에폭시 접착제의 표면특성과 구조특성은 scanning electron microscope (SEM)과 Fourier transform infrared spectroscopy (FT-IR)을 이용하여 관찰하였으며 T-peel 시험법에 의한 접착특성은 universal testing machine (UTM)를 이용하여 분석하였다. 실란처리에 따른 실리카의 평형 확산압력, 표면자유에너지, 비표면적은 BET법을 이용한 $N_2$/77 K 기체 흡착을 통하여 관찰하였다. 결과로서, 에폭시 접착제의 접착박리강도는 미처리에 비해 접착제 내 실란처리된 실리카가 함유됨에 따라 증가하였다. 이러한 결과는 실란커플링제가 에폭시 접착제의 분산을 증가시키는 중요한 역할이라고 판단된다. 그리고 MCPS로 실란처리한 에폭시 접착제의 경우 GPS와 MPS에 비해 가장 우수한 접착력을 나타냄을 확인하였다.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.221-229
• /
• 2002

PET nanocomposites filled with fumed silicas were prepared via direct melt compounding method at various mixing conditions such as filler type and filler content. Some fumed silicas were pre-treated to improve the wettability and dispersibility, and principal characterizations were performed to investigate the effects of nano fumed silicas on polymer matrix. Hydrophobic fumed silica (M-FS), which has the similar contact angles of water with neat PET, acted as the best reinforcement for the thermal stability and mechanical properties of PET nanocomposite, and FE-SEM images also showed that M-FS was uniformly dispersed into matrix and had good wettability. But, some filler (O-FS) had low dispersibility and caused the deterioration of mechanical properties. Besides, the results of DSC revealed the nucleation effect of all fillers in polymer matrix, and PET nanocomposite filled with hydroptilic fumed silica (FS) showed markedly the characteristic dynamic rheological properties such as shear thinning behavior at very low frequencies and the decrease of viscosity.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3711-3718
• /
• 2012

Here, we report a chain-length dependent morphology and pore structure tailing of mesoporous silica templated from organogels, which is formed by primary alkylamine and ethylene glycol at room temperature. As the chain length of alkylamine changes from 12 to 18, the resulted materials exhibit a morphology change from layers to spheres and platelets, respectively. SEM and TEM observation revealed that these shapes appear to be inherited from their parent organogels. Further pore structure characterization by nitrogen sorption analysis demonstrates that all the resulted silicas exhibit typical IV isotherms indicative of uniform mesopores, and their pore sizes are dependent on the chain length of alkylamine used.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.85-93
• /
• 2004

We have prepared poly(ethylene terephthalate) (PET) nanocomposites filled with two different types of fumed silicas, hydrophilic (FS) and hydrophobic (MFS) silicas of 7-nm diameter, by in situ polymerization. We then investigated the morphological changes, rheological properties, crystallization behavior, and mechanical properties of the PET nanocomposites. Transmission electron microscopy (TEM) images indicate that the dispersibility of the fumed silica was improved effectively by in situ polymerization; in particular, MFS had better dispersibility than FS on the non-polar PET polymer. The crystallization behavior of the nanocomposites revealed a peculiar tendency: all the fillers acted as retarding agents for the crystallization of the PET nanocomposites. The incorporation of fumed silicas increased the intrinsic viscosities (IV) of the PET matrix, and the strong particleparticle interactions of the filler led to an increased melt viscosity. Additionally, the mechanical properties, toughness, and modules of the nano-composites all increased, even at low filler content.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.107-116
• /
• 2005

Precipitated silicas modified by aluminium were characterised using inverse liquid chromatography in anhydrous heptane with squalene as probes. Their monolayer capacities of adsorption, Langmuir's and Henry's constants were determined from the desorption isotherms according to frontal analysis. A narrow band consisting of isotherms was observed. The introduction of aluminium has little influence on the monolayer capacity, Langmuir's constants and the Henry constant. Experimental data show that neither the amounts of aluminium on the silica nor the methods of the introduction of aluminium into the silica influence the interactions between the squalene and the silicas.

• 상하수도학회지
• /
• 제21권1호
• /
• pp.139-147
• /
• 2007

For environmental remediation of a contaminated groundwater plume, the use of zero-valent metal represents one of the latest innovative technologies. In this study, the effects of denitrification by zero-valent iron adsorbed in mesoporous silicas have been studied for groundwater contaminant degradation. The mesoporous silica was functionalized with 3-mercaptopropyltrimethoxysilane (MPTS) ligands and the zero-valent iron precipitated in the mesopore of granular silica was made by $FeCl_2$ and $NaBH_4$. Hydrogen was exchanged with $Fe^{2+}$ ions in the granular silicas. And then the ions were reduced by sodium borohydride in the mesoporous silicas. The surface area of the silica determined via the BET method ranged from 858 to $1275m^2/g$. The reductive reaction of nitrate-nitrogen indicated that the degradation of nitrate-nitrogen appeared to be pseudo first-order with the observed reaction rate constant kobs ($0.1619h^{-1}$) and to be directly proportional to the specific surface area. Therefore, the mesoporous silica with nano zero-valent iron proposed as a novel treatment strategy for contaminated groundwater was successfully implemented herein for the removal of nitrate-nitrogen.

• 청정기술
• /
• 제17권1호
• /
• pp.13-18
• /
• 2011

포스핀(phosphine) 리간드(ligand)가 도포된 메조포러스 실리카(mesoporous silicas)에 팔라듐 나노입자를 도입하여 새로운 팔라듐(Pd) 불균일 촉매(heterogeneous catalyst)를 제조하였다. 제조된 촉매는 브롬화벤젠 유도체(bromobenzene derivatives)들의 Suzuki cross-coupling 반응에 대하여 뛰어난 촉매활성을 나타내었고 촉매를 두 번째 사용하였을 때는 수율이 감소하였다.