• Wind and Structures
• /
• 제13권5호
• /
• pp.385-412
• /
• 2010

This article provides a time-resolved characterisation of the wind field in a recently-commissioned, downdraft outflow simulator at The University of Western Ontario. A large slot jet approach to physical simulation was used. The simulator performance was assessed against field observations from a 2002 downdraft outflow near Lubbock, Texas. Outflow wind speed records were decomposed according to classical time series analysis. Length scales, characterising the coarse and fine flow structure, were determined from the time-varying mean and residual components, respectively. The simulated downdraft outflow was approximately 1200 times smaller in spatial extent than the 2002 Lubbock event.

• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.379-398
• /
• 2014

This article discusses the microvibration analysis of a cantilever configured reaction wheel assembly. Disturbances induced by the reaction wheel assembly were measured using a previously designed platform. Modelling strategies for the effect of damping are presented. Sine-sweep tests are performed and a method is developed to model harmonic excitations based on the corresponding test results. The often ignored broadband noise is modelled by removing spikes identified in the raw signal including a method of identifying spikes from energy variation and band-stop filter design. The validation of the reaction wheel disturbance model with full excitations (harmonics and broadband noise) is presented and flaws due to missing broadband noise in conventional reaction wheel assembly microvibration analysis are discussed.

• 대한전기학회논문지
• /
• 제36권11호
• /
• pp.813-818
• /
• 1987

본 논문에서는 AR모델링 기법과 Principal Component Analysis를 이용하여 주파수 분해능이 좋은 스펙트럼 추정방법을 제안하였다. 주어진 데이타를 고유벡터에 의해 전개하고, 각 고유벡터에 대하여 AR스펙트럼추정기법에 의하여 고유 스펙트럼을 구하고, 이것을 고유치로 가중하여 합성함으로써 주파수 분해능력이 좋은 스펙트럼 추정치를 얻을 수 있다. 계산량은 증가하지만, 특히 짧은 데이타, 협대역 신호, 그리고 신호대 잡음비가 낮은 경우에 비헤서도 정확한 스펙트럼 추정이 가능하다는 것을 컴퓨터 시뮬레이션을 통해 확인 하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.622-628
• /
• 1999

This paper presented to design a robust turbo-generator control system using {{{{ { H}_{$\infty$ } }}}} control synthesis for improving small-signal stability. Application study of{{{{ { H}_{$\infty$ } }}}} control synthesis is more appropriate in this system since a turbo-generator system is usually operated under circumstance of unmeasurable modelling uncertainty and external disturbance. The{{{{ { H}_{$\infty$ } }}}} control theory was briefly reviewed for good understanding and the reasonable approach. The design results are simulated for a case study and to check the system performance in comparison with currently operating Lead/Lag filtered PSS performance.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2730-2741
• /
• 1993

A mathematical model of the seeker scan-loop which is composed of a spin-stabilized gyroscope and its driving signal processors is derived. The derived model has a transmission zero pair on the imaginary axis near to the required bandwidth. The LQG/LTR design methodology is evolved for the derived scan-loop model. To implement the designed LQG/LTR compensator to the actual plant, the compensator order is reduced using the internally balanced realization method. The performances of the LQG/LTR compensator are tested and compared with those of the P-control. Especially, stability-robustnessexperiments for model uncertainties represented in the form of time-delays are performed. It is demonstrated that the LQG/STR compensator is actually very robust to model uncertainties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.282-283
• /
• 2007

본 논문에서는 저전압에서 구동 할 수 있는 압전구동 방식의 RF MEMS 스위치를 설계하였다. 설계는 유한요소기법(FEM)을 지원하는 시뮬레이터 (ConventorWare)를 사용하여 수행하였고, 이를 바탕으로 deflection, contact force, stress 등 기계적인 해석을 함으로써 최적화된 설계를 할 수 있었다. 이번 설계에서는 적절한 contact force를 유지하면서 hinge에서 받는 stress를 최소화하기 위하여 구동기를 2개 사용한 듀얼형식의 모델을 제안하였고, hinge의 모양은 'ㄷ'로 하여 deflection을 향상시켰다. 이 듀얼형식의 최적화된 모델은 signal line과 contact pad 간의 gap이 3.4${\mu}m$일 때, 최초 2.8V에서 contact이 이루어졌으며, 5V에서 12.4${\mu}N$의 contact force와 116MPa의 stress를 얻었고, 차후, SP4T나 SP6T 등의 설계시 공간 효율이 높은 다양한 형태의 구조를 설계할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.266-271
• /
• 1996

Optimal design of disk shaped piezoelectric actuator and sensor mounted on the plate structure is studied for the control of noise radiated fro the structure. The sensor signal is returned to the actuator through negative gain. Finite element modelling is used for the plate structure and the disk shaped piezoelectric sensor and actuator. The objective function is the total radiated sound power and the design variables are the locations and sizes of the piezoelectric actuator and sensor. The optimal is performed at the resonance and the off resonance frequency and the results show good noise reduction.

• 소음진동
• /
• 제9권2호
• /
• pp.265-272
• /
• 1999

A LMS algorithms has been widely used for an adaptive filter algorithm in active noise control systems. But this algorithm has poor convergence and it is very difficult to select optimal convergence parameters in this algorithm. In this paper, a fuzzy LMS algorithm where the convergence parameters are computed using a fuzzy logic controller was proposed. A proposed algorithm was applied to active noise control system in HVAC(central Heating Ventilation and Air Conditioning) ducts. The experimental ducts and experimental apparatus were designed and manufactured for experiments, and the modelling of the experimental ducts was also performed for computer simulations. Computer simulations and experiments were performed to show the effectiveness of a proposed algorithm.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.1-8
• /
• 2004

A newly-built inverter has to undergo a series of stress tests in the final stage of production line. This can be achieved by connecting it to a dynamometer consisting of a three-phase machine joined by a rigid shaft to a DC load machine. The latter is controlled to create some specific load characteristic needed for the test. In this paper a test method is proposed, in which no mechanical equipment is needed. The suggested test stand consists only of a inverter to be tested and a simulator converter. Both devices are connected back-to-back on the AC-side via smoothing reactors. The simulator operates in real-time as an equivalent load circuit, so that the device under test will only notice the behaviour of a three-phase machine under consideration of the load. In oder to prove rightness of the suggested test method, the simulation and actural experiment carried out emulation for a 2.2kW induction motor.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 1997년도 학술발표회
• /
• pp.43-43
• /
• 1997

Platelet production in blood is regulated by a lineage specific humoral factor called thrombopoietin (TPO). The amino terminal domain of TPO (TPO-N) has a sequence homology to erythropoietin (EPO) and is responsible for the signal transduction mediated by the TPO receptor, c-mpl.(omitted)