• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1689-1690
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.541-546
• /
• 2001

Application of bonding by adhesives can be found in many industries, particularly in advanced technological domains such as the aeronautical and space industries, automobile manufacture, and electronics. Periodic inspection with conventional ultrasonic NDE techniques is capable of indicating the presence and possible location of crack. Continuous ultrasonic attenuation monitoring has potential to supply information. This study used adhesive-bonded single-lap joints specimen to evaluate such possibility by ultrasonic signal processing method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1504-1507
• /
• 1997

In this paper, we investigate a traffic flow modeled by stochastic Petri nets. The model consists of two parts : the traffic flow model and signal controller model. These models are used for analyzing the flow of the traffic intersection. The results of the evaluation are derived from a Petri Net-based simulation package, Greatspn. Through simulation we compare the performances of the pretimed signal controller with those of the trafic-adaptive signal controller.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.425-428
• /
• 2001

In this paper, FMCW radar signal processing technique for the vehicle detection system are studied. And FMCW radar sensor is used as a equipment for vehicle detection. To test the performance of developed algorithm, the evaluation of the algorithm is done by simulation for signal processing technique of vehicle detection system. RADAR signal of a driving vehicle is generated by using the Matlab. Distance and velocity of vehicles are calculated with developed a1gorithm. Also the signal processing procedure is done for the virtual data with FM-AM converted noise.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1645-1652
• /
• 2016

FTN(Faster-Than-Nyquist) 전송 방식은 송신 펄스를 중첩시켜 동일한 대역폭 내에서 나이퀴스트(Nyquist) 율보다 빠른 속도로 심볼을 전송하는 기법이다. FTN 전송 방식을 적용하면 동일한 시간 구간 동안 나이퀴스트 전송 방식보다 많은 수의 심볼이 존재하게 되므로, 심볼 당 에너지가 같을 때 신호의 송신 전력이 커진다. 따라서 FTN 기반 전송 시스템의 올바른 성능 평가를 위해서는 이 점에 유의하여 성능 평가 기준을 설정하여야 하며, 기존 나이퀴스트 기반 전송 시스템에서 활용되던 성능 평가 기준 간의 환산 공식 또한 주의하여 활용할 필요가 있다. 본 논문에서는 FTN 전송 방식이 적용된 시스템에서의 성능 평가 기준과 관계식에 대해 분석하고 타당한 성능 평가 기준을 제시한다.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.80-88
• /
• 1997

This paper describes a design of a Wavelet Adaptive Filter(WAF) for the removal of the baseline wandering and the minimization of the signal distortion using by wavelet transform and adaptive filter in the ECG signal. WAF consists of two parts. The first part is wavelet transform that decomposes the ECG signal into seven frequency bands using Vaidyanathan and Hoang wavelet. The second part is adaptive filter that uses the signal of seventh low frequency band among the wavelet transformed signals as primary input and a unit impulse sequence as reference input. For the evaluation of the performance of WAF, we used several baseline wandering elimination filters such as commerical standard filter with cutoff frequency of 0.5Hz and general adaptive filter. We made use of MIT/BIH database and real patient data for the evaluation. In conclusion, WAF showed a lower ST segement distortion than standard filter and adaptive filter and has a higher eliminated noise power than standard filter and adaptive filter.

• 한국음향학회지
• /
• 제34권5호
• /
• pp.403-409
• /
• 2015

본 논문에서는 G.711 패킷 손실 은닉 알고리즘의 성능향상을 위해 적응적 신호 크기 예측을 사용하는 패킷 손실 알고리즘을 제안한다. 기존의 방법은 연속 손실이 발생하였을 때 20 %의 감쇠인자를 가지고 이득조절을 수행하였다. 그러나 이 방법은 신호의 변화를 고려하지 않기 때문에 신호가 왜곡되는 경우가 발생한다. 따라서 Least Mean Square(LMS) 예측기를 사용하여 이전과 이후 프레임의 정보를 통한 적응적 신호 크기 예측으로 이득을 조절하는 것을 제안한다. 제안된 알고리즘의 성능 평가는 Perceptual Evaluation of Speech Quality(PESQ) 평가를 통하여 나타내었다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1087-1094
• /
• 2008

This study describes a system for human sensibility evaluation using PPG(photoplethysmogram) signal and biofeedback algorithm to respond the bad(negative) mood. For this objective, PPG signals for two emotional states(positive/negative) are collected. To evoke the test emotions, happy(or joyful) and sad(or irritating) movie files are collected and played in subjects' monitor. From the acquired PPG signal, the heart rate variability(HRV) is calculated. Using the HRV and its FFT spectra, the human sensibility is evaluated. Since the heart is a representative organ which is controlled by the autonomic nervous system(ANS), the ANS may reflect the changes in emotion. The biofeedback algorithm is designed with motion image player interacting with the results of the sensibility evaluation. It was shown that HRV was changed according to the subject's emotions. Accordingly, the sensibility evaluation test showed feasibility of the our method.

• 한국전자통신학회논문지
• /
• 제8권12호
• /
• pp.1793-1802
• /
• 2013

음원분리 방법으로는 여러 가지가 제안되고 있으나 그 중에서도 주파수영역 두 귀 모델(Frequency Domain Binaural Model : FDBM)은 저 연산량과 울림 제거에 효과적이다. FDBM에 의한 두 귀 보청 시스템은 SNR이나 기여도 함수(Coherence function)에 의한 평가로 하기 때문에 인간의 청취특성을 고려하지 않고 있다. 본 논문에서는 음질의 문제 해결을 위하여 FDBM의 음원분리 성능평가를 하였다. SNR, 기여도 함수, PESQ의 세 가지 수법을 이용하여 기본 특성에 대하여 시뮬레이션을 통하여 확인하였다. 모든 결과가 FDBM에 의해 좌우 채널간 평가치의 차가 작게 되었고, 좌우 채널이 거의 같은 레벨까지 개선되었음을 확인하였다. 그리고 음원방향을 바꾸고 음원 수를 증가시킨 경우에도 일정한 개선이 보였다. SNR과 기여도 함수, PESQ의 결과를 비교하면 PESQ의 평가에서는 입력 SNR를 변동시킨 경우에도 거의 모든 조건에서 분리에 의한 평가가 개선되었다.

• 한국군사과학기술학회지
• /
• 제26권4호
• /
• pp.324-334
• /
• 2023

In this paper, the target simulator for RF signals was developed by using VST(Vector Signal Transceiver) and set by real-time signal processing SW programs. A function to process RF signals using FPGA(Field Programmable Gate Array) board was designed. The system functions capable of data processing, raw signals monitoring, target signals(simulated range, velocity) generating and RF environments data analyzing were implemented. And the characteristics of modulated signal were analyzed in RF environment. All function of programs for processing RF signal have options to store signal data and to manage the data. The validity of the signal simulation was confirmed through verification of simulated signal results.