• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.225-228
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output, and has extent of applying without limit of K, L, T parameters.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.345-350
• /
• 2010

This paper presents a Photovoltaic Generation system using a Space Vector Modulation. PWM voltage source inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power, from 10 to 20[%]. Synchronous signal and control signal was processed by the 56F8323 microprocessor for stable modulation. Also, Waveforms output current and voltage of system controlled so that phase conforms and can supply electric power that stabilize by the unit power factor.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.109-112
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control In various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade -approximated, then initial values are determined by the Ziegler-Nichols method. After inputting constraints of evolution programs, we perform crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output and has extent of applying without limit of K, L, T.

• Journal of Drive and Control
• /
• v.20 no.1
• /
• pp.27-33
• /
• 2023

From the perspective of dental chair manufacturers, it is important to of localizing hydraulic system in order to secure market competitiveness. This study aims to develop the analysis model of a dental chair which overseas companies secure core technologies. The study follows the steps below. First, the component parts of the solenoid valve unit of a foreign leading company are analyzed and implemented in virtual environment. Second, dynamic behavior scenario is established based on solenoid valve signal chart provided by a foreign leading company. The analysis model is verified and its performance is analyzed using dynamic behavior according to each scenario. Third, a simulation is carried out to determine whether the cylinder velocity of designed hydraulic system surpasses 1cm/s as required by the design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1526-1537
• /
• 1998

The split-screen function on the multipoint control unit(MCU) which is usually using processing method based on pixel domain has many problems for manipulating the video signal in real-time. Although the researches and the developements to cope ith such problems are processing, these have too complex architecture to implement and are limited to method for H.261 video signal. In this paper, we propose a new mechanism for split-screen that can actually apply to ISO/IEC MPEG video standard. The new method that is proposed in this paper do the processes in complete compression domain, thus it is suitable for the application of real-time multipoint multimedia communication service. By simple interpreting and manipulating the MPEG video element stream, the split-screen functional module can be implemented easily and the result of the procedures does not accompany image degradation at all. Finally, the complexity of implementation, the aspect for processing delay and the loss of image quality as compared to that resulting in the case of applying the previous split-screen method has been investigated. And it is confirmed that the proposed mechanism has a significant advantage as a split-screen method.

• Publications of The Korean Astronomical Society
• /
• v.6 no.1
• /
• pp.62-75
• /
• 1991

The small sized telescope can be best used if the control and observation can be made remotely and fully automatically by the aid of computers. We discuss the possible ways of automating the existing telescopes of various designs using personal computers. 'We have specifically designed the parts necessary to automate 16 inch Cassegrain Telescope at Pusan University Observatory. The degree of automation we have set for the present work is the interactive. remote observation including opening and shutting down of dome slit. The observational modes we have in mind are photoelectric photometry and CCD imaging. The basic components of the hardware are interface card for 16 or 32 bit IBM PC family of computers, relay switches for the control of telescope movements, stepping motor controller card for the control of observational equipments, and AID converter unit that accepts signal from sensors for the environment conditions such as temperature, wind speeds, precipitation, etc. We also have designed and built a photoelectric photometer that can be fully controlled by the command of a computer. Such observational equipment is also essential in order that the remote observation can be realized.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.324-328
• /
• 2001

This paper presents parallel operation and control loop design of ZVT(Zero Voltage Transition) Full Bridge DC/DC Converter. At parallel operation of ZVT Full Bridge Converter, dynamic current shared inductor devides the same current of unit converter and ZVT circuit and aids to high efficiency in the system. Base on the modeling of ZVT. Full Bridge Converter, the control loop is designed using a simple two-pole, one-zero compensation circuit. To show the validity of the design procedures, the small signal analysis of the closed loop system and open loop system is carried out and the superiority of the dynamic characteristics is verified through the experiment with a 2kW, 50kHz prototype converter.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1064-1073
• /
• 2016

An adaptive speech streaming method to improve the perceived speech quality of a software-based multipoint control unit (SW-based MCU) over IP networks is proposed. First, the proposed method predicts whether the speech packet to be transmitted is lost. To this end, the proposed method learns the pattern of packet losses in the IP network, and then predicts the loss of the packet to be transmitted over that IP network. The proposed method classifies the speech signal into different classes of silence, unvoiced, speech onset, or voiced frame. Based on the results of packet loss prediction and speech classification, the proposed method determines the proper amount and bitrate of redundant speech data (RSD) that are sent with primary speech data (PSD) in order to assist the speech decoder to restore the speech signals of lost packets. Specifically, when a packet is predicted to be lost, the amount and bitrate of the RSD must be increased through a reduction in the bitrate of the PSD. The effectiveness of the proposed method for learning the packet loss pattern and assigning a different speech coding rate is then demonstrated using a support vector machine and adaptive multirate-narrowband, respectively. The results show that as compared with conventional methods that restore lost speech signals, the proposed method remarkably improves the perceived speech quality of an SW-based MCU under various packet loss conditions in an IP network.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.217-227
• /
• 2008

The electric power subsystems (EPS) of most remote sensing satellites consist of a solar array as a source of energy, a storage battery, a power management and control (PMC) unit and a charge equalization unit (CEU) for the storage battery. The PMC and CEU use high frequency transformers in their power modules. This paper presents a design, implementation and testing results of a high frequency transformer for the EPS of satellite applications. Two approaches are used in the design process of the transformer based on the pre-determined transformer specifications. The transformer is designed based on an ETD 29 ferrite core. The implemented transformer consists of one center-tapped primary coil with eleven center-tapped secondary coils. The offline calculation results and measured values of R, L for transformer coils are convergence. A test circuit for measuring the transformer parameters like voltage, current and B-H hysteresis was implemented and applied. The test results confirm that the voltage waveforms of both primary and secondary coils were as desired. No overlapping occurred between the control signal and the transformer, which was not saturated during testing even during a short circuit test of the secondary channels. The dynamic B-H loop characteristics of the used transformer cores were measured. The sample test results are given in this paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.3
• /
• pp.51-62
• /
• 1996

Electro sensitive traffic system can not consider passenger car unit, so it causes start up delay time and passenger waiting time. In this paper, it antecedently creates passenger car unit at the bottom intersection using neural network. But, sometimes it can make mistakes due to changes in car weight, car speed, and passing area. Therefore, it consequently reduces the car waiting time and start-up delay time using fuzzy control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.