• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.841-852
• /
• 2010

An integrated process control (IPC) procedure is a scheme which simultaneously applies the engineering control procedure (EPC) and statistical control procedure (SPC) techniques to reduce the variation of a process. In the IPC procedure, the observed deviations are monitored during the process where adjustments are repeatedly done by its controller. Because the effects of the noise, the special cause, and the adjustment are mixed, the use and properties of the SPC procedure for the out-of-control process are complicated. This paper considers efficiency of EWMA charts for detecting special causes in an ARMA(1,1) noise model with a minimum mean squared error adjustment policy. And we propose the readjustment procedure after having a true signal. This procedure can be considered when the elimination of the special cause is not practically possible.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.98-105
• /
• 2012

This paper describes a new method for a speech playback speed control with high quality. The proposed method provides an adaptive threshold filtering solution for detecting active regions of a speech signal that are followed by playback speed. For a given playback speed, threshold value is adaptively determined with the statistics(:mean and standard deviation) of each frame in speech, and is used to select only active blocks within the current frame. To minimize quality degradation(i.e., pitch degradation) caused due to high-speed playback, the threshold filtering priorly eliminates relatively low-activity blocks including voice and unvoice. Simulation results show that the proposed scheme provides a playback speed control solution with higher quality than SOLA(Synchonized OverLap Add) method using the pitch extraction of speech.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.366-371
• /
• 2017

In this paper, we introduce an electrocardiogram (ECG) system designed to solve problems caused by wetgels and motion artifacts in measuring active movement. The system is called a dry-contact ECG and was designed by considering impedance matching between skin and electrode as well as the frictional electricity between electrode and clothes. In order to create the system, we measured impedance on the skin-electrode interface, and the result was applied to the electronic circuit scheme. Moreover, we added an electrode on the back of the measurement electrode to make a flow path to ground the electrical noise. The final ECG circuit and novel electrode were used to detect real human cardiac signals from a subject who was tested while standing still and walking. The signals obtained from the two activities were nicely shaped, without any motion artifact noise. We took electrode size into account in this study because the impedance depended on the area of the electrode. An electrode of 50 mm diameter showed the best curve for the ECG signal without any electrical noise.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.283-288
• /
• 2018

In this paper, it is required that the next generation wireless transmission system can support a large number of users without distortion of transmission signal with high data rate in various different propagation environment while using limited resources as efficiently as possible, and therefore an efficient transmission system is continuously required. Because of the large amount of data to be handled in a limited frequency band, a very complex digital modulation scheme is adopted. the linearity of the power amplifier determines the linearity of the entire communication system, and thus a linear amplifier is required. In cognitive radion systems, there is a power control issue in the relationship between primary and secondary users. This problem is solved by simulating the communication system so as to select the cognitive radio power while power control while overcoming linearity by using feed-forward PA.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.325-330
• /
• 2012

A single-phase PVPCS(photovoltaic power conditioning system) that contains a single phase dc-ac inverter tends to draw an ac ripple current at twice the out frequency. Such a ripple current may shorten passive elements life span and worsen output current THD. As a result, it may reduce the efficiency of the whole PVPCS system. In this paper, the ripple current propagation is analyzed, and two methods to reduce the ripple current are proposed. Firslyt, this paper presents notch filter with IP voltage controller to reject specific current ripple in single-phase PVPCS. The notch filter can be designed that suppress just only specific frequency component and no phase delay. The proposed notch filter can suppress output command signal in the ripple bandwidth for reducing output current THD. Secondly, for reducing specific current ripple, the other method is feed-forward compensation to incorporate a current control loop in the dc-dc converter. The proposed notch filter and feed-forward compensation method have been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.644-651
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on water quality such as turbidity, temperature, pH and alkalinity. However, the process of chemical reaction to improve water quality (e.g., turbidity) by chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts using Jar-test data. In this paper, a systematic control strategy is proposed to derive the optimum dosage of coagulant, PAC(Polymerized Aluminium Chloride), using Jar-test results. A neural network model is developed for coagulant dosing and purifying process by means of six input variables (turbidity, temperature, pH, alkalinity of raw water, PAC feed rate, turbidity in flocculation) and one output variable, while considering the relationships to the reaction of coagulation and flocculation. The model is utilized to derive the optimum coagulant dosage (in the sense of minimizing turbidity of water in flocculator). The ability of the proposed control scheme validated through the field test has proved to be of considerable practical value.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.72-81
• /
• 2009

This paper presents quasi-resonant type high power factor ac power supply for atmospheric pressure plasma cleaning system adopting three phase PFC boost converter and it's control method. The presented ac power supply consists of single phase H-bridge inverter, step-up transformer for generating high voltage and three phase PFC boost converter for high power factor on source utility. Unlikely to the traditional LC resonant converter, the propose one has an inductor inside only. A single resonant takes place through the inside inductor and the capacitor from the plasma load modeled into two series capacitor and one resistance. The quasi-resonant can be achieved by cutting the switching signal when the load current decrease to zero. To obtain power control ability, the propose converter controlled by two control schemes. One is the changing output pulse period scheme in the manner of PFM(Pulse Frequency Modulation) control. On the other, to provide more higher power to load, the DC rail voltage is directly controlled by the 3-phase PFC boost converter. The significant merits of the proposed converter are the uniform power providing capability for high quality plasma generation and low reactive power in AC and DC side. The proposed work is verified through digital simulation and experimental implementation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.45-52
• /
• 2015

Since the broadcast message in satellite signals the security of the data is extremely poor compared to other communication technologies such as the broadcast signal. Thus, encryption of the communication satellite has become a very important issue, an analysis of the communication performance of a general service is always required. In this paper, In order to analyze the encrypted communication the turbo code in an IP-based satellite communication applies the code rate compatible punctured and The wireless channel in consideration of the actual satellite communication was constructed by placing a weight on the Rayleigh fading and the Rician fading two channels. Retransmission-based error control scheme were constructed in the best performance of H-ARQ Type-II, III scheme of a number of ways that are recently considered. we analyzed the effects of normal service against a satellite communication network The security services were configured with encryption algorithms AES, ARIA (CTR, CBC mode).

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.199-204
• /
• 1998

To increase the storage density in hologram recording, a simple scheme to obtain rotational, angular and spatial multiplexing efficiently at the same time is proposed and experimented. Both rotational multiplexing and angular multiplexing are obtained by controlling the reference beam directly by use of a pair of wedge prisms, while spatial multiplexing is obtained by shifting the recording medium in the recording plane. It is possible to get both an acute-angle geometry, in which the angle between the signal and reference beams is less than 90$^{\circ}$, and a 90$^{\circ}$ geometry, in which the angle is approximately 90$^{\circ}$. In experiment, 180 holograms were multiplexed with an acute-angle geometry where a photopolymer was used for the recording medium, and 147 holograms with 90$^{\circ}$ geometry where a Fe-doped LiNbO$_3$ crystal was used. The proposed scheme makes it easy it easy to realize a practical holographic memory system by simplifying the control of three complex mechanical motions that are necessary for the three multiplexing techniques.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.10-19
• /
• 2001

In this paper, we propose an effective but simple multi-rate parallel interference canceller(PIC) for the international mobile telecommunications-2000(IMT-2000) 3rd generation partnership project (3GPP) system. For effective multi-rate processing, we define the basic block as one symbol period of the dedicated physical control channel(DPCCH) having the lowest data rate and common to all users. Then, decision and interference cancellation are performed at every basic block. For an asynchronous channel, we propose an advance removal scheme that removes in advance multiple access interference(MAI) due to the next blockof other users with shorter delay. Introducing a pipeline structure at a sample base, we can implement efficiently the PIC using the advance removal scheme with a minimum hardware and no extra computations. Through computer simulations, we analyze the bit error rate(BER) performance of the proposed PIC with respect to signal-to-noise ratio(SNR) and the number of users.