• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.280-280
• /
• 2022

Tiller angle, defined as the angle between the main stem and its side tillers, is one of the main target traits selected inbreeding to achieve the ideal plant type and increase rice yield. Therefore, the discovery and identification of tiller angle-related genes can provide architecture and yield. In the present work, using QTL analysis hence a total of 8 quantitative trait loci (QTLs) were detected based on the phenotype data of tiller angle and tiller crown width in two years. Among them, four QTLs (qTA9, qCW9, qTA9-1, qCW9-1) were overlapped at marker interval RM6235-RM24288 on chromosome 9 with a large effect value regarded as stable major QTL. Twenty tiller angle-related genes were selected from the target region and the relative gene expression levels were checked in five compact type lines, five spreading type lines, and their parental lines. Finally, OsSA URq9 which belongs auxin-responsive SMALL AUXIN UP RNA (SAUR) protein family was selected as a target gene. Overall, this work will help broaden our understanding of the genetic control of tiller angle and tiller crown width, and this study provides both a good theoretical basis and a new genetic resource for the breeding of ideal-type rice.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.826-832
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA- $\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. However, a small decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with main chain type was measured. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA- $\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• 대한정형도수물리치료학회지
• /
• 제22권2호
• /
• pp.15-20
• /
• 2016

Background: The purpose of this study was to compared of scapular position between operation side and non-operation side to the rotator cuff surgery. Methods: This study was carried out with a total 34 patients: male (n=14), female (n=20). Shoulder range of motion (ROM), the quadruple visual analogue scale (QVAS), the shoulder pain and disability index (SPADI), and the scapular index (SI) were used to assess shoulder posture and function. SI was the resting position of the scapular was determined by measuring the distance from the mid-point of the sternal notch (SN) to the medial aspect of the coracoid process (CP) and the horizontal distance from the posterolateral angle of the acromion (PLA) to the thoracic spine (TS) with a soft tape measure. The SI was calculated using the equation: [(SN to CP/PLA to TS) ${\times}$ 100]. Results: There were no significant difference in ROM, QVAS to rotator repair patients according to SI (p>.05). There were significant differences in SI between the operation side and the non-operation side (p<.01). Conclusions: Scapular position was operation side more internal rotation, protraction, abduction than non-operation side. Therefore, health professionals managing for rotator cuff tear repair patients should consider scapular position.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2003

This paper studied the effects of inclination of piles on pile behaviors. The following are the conclusions of this study. (1) When all the piles are inclined to a same direction, the piles reaction, maximum moment and horizontal displacement of footing increase as the angle of inclination increases. (2) When the piles of each opposite side are inclined symmetrically, the vertical reaction either increases or decreases in proportion to the angle of inclination. In this case, the vertical reaction of inclined piles decreases but the vertical reaction of non-Inclined piles increases.

• Structural Engineering and Mechanics
• /
• 제13권3호
• /
• pp.345-353
• /
• 2002

Three noded plate and shell finite element and 3D beam element in conjunction with Lanczos method are used for studying the effect of boat tail angle on the free vibration characteristics of a typical payload fairing for three different cylinder diameters with height to diameter ratio 1.5. Configurations without boat tail structural member are also studied. One half of the one side fairing structure is considered for the analysis and symmetric boundary conditions are used.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.278-281
• /
• 2000

In this abstract a novel control scheme of voltage-source PWM rectifiers using only dc-side sensors is proposed. The phase currents are reconstructed from switching states of the rectifier and the dc output current. For effective current control the currents are estimated by a predictive state observer. Also both the phase angle and the magnitude of th source voltage are estimated by phase estimator and magnitude estimator respectively. The validity of the proposed ac sensorless technique is verified by experimental results.

• 디자인학연구
• /
• 제17권4호
• /
• pp.141-148
• /
• 2004

본 논문은 스텝 애니메이션에서 표현되어지는 감성을 정의하고, 스텝 관련 감성 자극 요소들을 추출 측정, 분석하여 스텝의 직관적인 감성 표현을 정량화시키는 것을 목적으로 하고 있다. 실험 방법으로는 스텝 관련 27개의 감성 표현 어휘와 36개의 샘플 스텝 동영상의 상관관계를 설문 조사하였다. 통합된 데이터를 수량화 이론 III류를 이용하여 스텝의 감성적 멘털구조를 2차원 평면화 하였다. 이를 분석한 결과, 감성 스텝은 가로의 자신감 축과 세로의 안정감 축으로 형성되어 있음을 밝혀내었다. 감성 스텝의 2차원 분포도를 분석한 결과, <자신감, 불안감 쪽> 2사분면과 <자신감, 안정감 쪽> 3사분면은 데이터가 풍부한 반면 <소심함, 불안감 쪽> 1사분면과 <소심함, 안정감 쪽> 4사분면의 데이터 분포가 희박함을 보여주었다. 이러한 그래프 분석을 통해 불안감이 느껴지면서 소심한 감성과 안정감이 느껴지는 소심한 캐릭터의 감성은 스텝만으로 표현하기에는 난해한 감성 표현임을 파악할 수 있었다. 감성에 영향을 미치는 스텝의 신체 물리적 요소로는 <스텝의 간격> <스텝의 속도> <골반(Y축)의 움직임 각도> <팔 스윙 폭> <척추(x축)의 움직임 각도> <신체의 기울기> 6가지로 선정하여 분석하였다. 그 결과 <스텝의 속도>와 <신체의 기울기>가 스텝의 감성 자극에 가장 큰 영향을 미치는 요소임을 밝혀낼 수 있었다. 본 연구를 통해 캐릭터의 미묘한 감성 상태를 스텝 애니메이션에 자연스럽게 표현해 내는 과정에 있어 애니메이터들의 주관적인 가성 표현들을 객관화, 정량화시키고자 하였으며 향후 이 데이터들을 활용한 멀티컨텐츠의 적용을 목표로 하고 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.127-134
• /
• 2017

Vortex Induced Vibration (VIV) is a typical flow-structure interference phenomenon which causes an unsteady flow pattern due to vortex shedding at or near the structure's natural frequency leading to resonant vibrations. VIV may cause premature fatigue failure of marine risers and pipelines. A test model was carried out to investigate the role of a stationary fairing by varying the caudal horn angle to suppress riser VIV taking into account the effect of wake interference. The test results show significant reduction of VIV for risers disposed in tandem and side-by-side. In general, fairing with a caudal horn of $45^{\circ}$ and $60^{\circ}$ are efficient in quelling VIV in risers. The results also reveal fairing can reduce the drag load of risers arranged side-by-side. For the tandem configuration, a fairing can reduce the drag load of an upstream riser, but will enlarge the drag force of the downstream riser.

• 대한소아치과학회지
• /
• 제5권1호
• /
• pp.12-18
• /
• 1978

The author has observed the ectopic eruption pattern on oblique cephalogram of 195 children. (5years: 78, 6 years: 58, 7 years: 59). The results were as follows; 1) Making a comparison between hold type and jump type of ectopic eruption, there are 4 cases in Hold type, 5 cases in jump type. 2) Making a comparison of ectopic eruptin between male and female, there are 7 cases in male, 2 cases in female. 3) Making a comparison of ectopic eruption between right side and left side, there are 5 cases at right side, 4 cases at left side. 4) Making a comparison of ectopic eruption among 5 years to 7 years, there are 4 cases in 5 years, 3 cases in 6 years, 2 cases in 7 years. 5) The prevalence of ectopic eruption of the maxillary first molar was 4.61%. 6) Normal eruption angle of the maxillary first molar is prevailing in $80^{\circ}{\sim}85^{\circ}$.