• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.135-147
• /
• 2007

이 논문은 CC 프로세스의 movable side trowel 효과를 연구하기 위한 실험과 모델링을 제시한다. FEA simulation을 이용하여 우리는 movable side trowel의 효과와 움직임에 대한 기초적인 이해를 얻어냈다. 단면의 side trowel 보다 양면의 side trowel이 실제의 3D 형상을 만드는 동안에 층간의 최적의 결합을 만들어 준다는 면에서 가장 적합하다는 것을 알아냈다. 우리의 실험이 위의 결과를 입증하였다.

• Wind and Structures
• /
• v.9 no.1
• /
• pp.75-93
• /
• 2006

This paper presents a quasi-steady model of vibrations of two cylinders in a side-by-side arrangement. The cylinders have flexible support and equal diameters. The model assumes that both cylinders participate in the process of vibration, each of them having two degrees of freedom. The movement of cylinders is described by a set of four non-linear differential equations. These equations are evaluated on the basis of a numerical simulation and experimental data. Moreover many features of cylinder vibrations are found from numerical results and are described in this paper.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.62-70
• /
• 2010

Secondary instability in the flow past two square cylinders in side-by-side arrangements is numerically studied by using a Floquet analysis. The distance between the neighboring faces of the two cylinders (G) is the key parameter which affects the secondary instability under consideration. In this paper, we present the critical Reynolds number for the secondary instability and the corresponding spanwise wave number of the most unstable (or least stable) wave for each G. Our results would shed light on a complete understanding of the onset of secondary instability in the presence of two side-by-side square cylinders.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.18-26
• /
• 2012

Though electricity consumption amount in industry has been increased gradually, corresponding power supply show symptoms of marginal point. Importance of demand-side management from large-industries has also been raised. This paper deals with induction motor, which is one of representative examples of heavy electricity consumption utilities, to analyze potential technical capability, economic feasibility from consumers' viewpoint and demand-side management feasibility from nation-wide perspective. Nation-wide economic feasibility analysis was done through California test, which has been used as demand-side management evaluation model. This paper also describes limitation of existing high efficiency induction motor in terms of contribution to demand-side management and utilizes premium motor to calculate demand-side management contribution level and economic feasibility evaluation. Likewise, this paper emphasizes the efficiency improvement of induction motor and analyzes how much premium motor related technologies can contribute to demand-side management.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• Journal of Pharmacopuncture
• /
• v.10 no.3
• /
• pp.113-119
• /
• 2007

Objectives Benign essential blepharospasm is a progressive neurological disorder characterized by involuntary muscle contractions and spasms of the eyelid muscles. The aim of this study is to provide evidence of differences between facial skin temperaure of the paralyzed side and normal side in Essential Blepharospasm patients. Methods The author studied 13 patients with Essential Blepharospasm. We measured skin temperature of the forehead, zygoma area of the paralyzed side and those of the normal side with The Digital Infrared thermal image. Results There were no significant facial skin temperature differences between the paralyzed side and normal side. Conclusions Thermography is a useful diagnostic tool. But we expect that it is essential to diagnose a disease correctly at an early stage and to find a prompt treatment by introducing and utilizing a simple nonivading diagnofic method other than Thermography.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.176-184
• /
• 2002

The door stiffness is one of the important factors for the side impact. Generally, the researches have been conducted on the assembled door. A side impact door beam is installed in a door to protect occupants from the side impact. This research is only concentrated on the side impact beam and a side impact beam is designed. The cross section is defined to have an elliptic shape. An optimization problem is defined to find the design maximizing the intrusion stiffness within the specified weight. Design variables are the radii and the thickness of the ellipsoid. The analysis of the side impact is carried out by the nonlinear finite element method. The optimization problem is solved by two methods. One is the experimental design scheme using an orthogonal array. The other is the gradient-based optimization using the response surface method(RSM). Both methods have obtained the better designs than the current one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.690-692
• /
• 2003

In this paper, we have investigated characteristics of radio frequency for double gate MOSFET with 50nm main gate in according to variation of side gate length. We could know the increasement of cut-off frequency as the side gate length is lower. As a result, we could know the most optimum performance characteristics when side gate length was 70nm. In this time, the DG MOSFET of side gate with 70nm has very high cut-off frequency like 41.4GHz.

• Journal of the Korean Home Economics Association
• /
• v.32 no.1
• /
• pp.151-164
• /
• 1994

This research was conducted to survey kinds and frequencies of side dishes served in commercial Korean style restaurant in some part of Korea. The results were summerized as follows: 1. The average number of side dishes in Tang(Korean soup) was 3.3 that is Bae-chu Kimchi. Si-Kum-chi namul, Moeng-ran jeot and O-jing-o jeot in ordering frequencies. 2. In Chigae(stew) and Pi-bim bab(mixed rice including Sot bab) the average number of side dishes was about 4 Jungol and that of Jim was from 3 to 5 and the kinds of side dishes were variety of menu items. 3. Meons (noodles) were served with 1 or 2 kinds of side dishes those based of Bae-chu Kimchi and added 1 Kind of side dish. 4. Han-jeong-sik (Korean style full course meny) was served with 16 kinds of side dishes averge it was consisted of Bab(steamed rice) side dishes such as U-gu-zi guk(vegetable soup) Deun-jang chigae (fermented soy stew) Hong-o jim (fish stew) Go-sa-ri namul Pulgogi Ho-bak jeon, Beon-sut bokum Yuk hoi Bae-chu kimchi Mung-ran jeot Sae-u tuikim and Gam-ja tuikim in ordering frequences.

• Journal of computational fluids engineering
• /
• v.6 no.3
• /
• pp.27-31
• /
• 2001

For rapid and abrupt control of a missile in supersonic flight, side jet on a missile body is found to be a useful device as evidenced by recent missile development at several nations. The magnitude of the side jet and the duration of it decide the level of control of such a missile system. In this paper, the aerodynamic characteristics of the side jet device itself are examined in terms of key parameters such as the side jet nozzle geometry, the chamber pressure and temperature. Specifically attention is paid to the effect of the chamber shape between the straight nozzle and the bent nozzle by 90 degrees on the nozzle flow properties. The thrust magnitudes are compared between the two shapes. Whether the way the nozzle is bent at the joint affects the nozzle performance is also investigated. Effects of the length and the divergence angle of the nozzle on the thrust are also quantified among three different side jet nozzles.