• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.96-106
• /
• 2020

This study designed four types with a different halter-neck shoulder straps of an athleisure brassiere for women in their 20-40s as well as analyzed the shoulder strap pressure, shoulder strap position, subjective sensation, and design preference when wearing them. The design basis was to reduce the pressure at the back of the neck area, to allow the shoulder strap to pass down the neck as far as possible, and to send the anatomically sensitive side neck out as far as possible. As a result, H, which had the best subjective sensation and design preference, had the shoulder strap positioned more towards the shoulder point; in addition, the back of the neck did not pass. It was also found that the shoulder strap pressure near the neck was small. However, E, with the lowest subjective sensation, had the highest shoulder strap pressure and was placed up the neck. This confirmed that the position and pressure of the shoulder strap are variable when influencing the subjective sensation.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.12-22
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the one piece swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the one piece swimsuit, was composed of attraction factor and boldness factor. Attraction was the most important factor in the one piece swimsuit. 2) The visual images according to changes in the shoulder strap of the one piece swimsuits are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be wanted to dress - sophisticated image and untidy - unique image. 3) As the swimsuit gets shorter, it has more wanted to dress - sophisticated image and untidy - unique image. 4) The number of shoulder straps and swimsuit length do interact with each other in attraction factor and boldness factor. In attraction factor, one shoulder strap and high cut of the one piece swimsuit has the most wanted to dress - sophisticated image. However two shoulder straps and low cut of the one piece swimsuit has the most not wanted to dress - countrified image. In boldness factor, one shoulder strap and high cut of the one piece swimsuit has the most untidy - unique image. However two shoulder straps and regular cut of the one piece swimsuit has the most tidy - ordinary image.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.766-774
• /
• 2022

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.55-66
• /
• 2011

The purpose of this study is to evaluate the differences of the visual image on variations in the shoulder strap and the length of the bikini swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the pants length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the bikini swimsuit, was composed of boldness, matureness and attraction factors. Boldness was the most important factor in the bikini swimsuit. 2) The visual images according to changes in the shoulder strap of the bikini swimsuits appeared the most (1) plain and simple image, (2) decent and neat image, (3) a wanted-not-to-dress and a natural image in the two shoulder straps, (1) unique and complicated image, (2) a lively and sexy image in the one shoulder strap and an unnatural but a wanted-to-dress image in the strapless. 3) The visual images according to changes in length of the bikini swimsuits appeared the most (1) unique and complicated image, (2) a lively and sexy image in high cut, but plain and simple image in low cut. 4) The number of shoulder straps and length do interact with each other in boldness factor: One shoulder strap and high cut of the bikini swimsuit has the most unique and complicated image. However two shoulder straps and regular cut of that has the most plain and simple image. 5) The result of matureness and attraction factors using the MCA, length affects more than the number of shoulder straps in the visual images of the bikini swimsuit.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.91-98
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the monokini swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of monokini swimsuit, was composed of boldness factor, attention factor and attraction factor. Boldness was the most important factor in the monokini swimsuit. 2) The visual images according to changes in the shoulder strap of the monokini swimsuit are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be untidy - a trendy image, showy -a characterful image and wanted to dress -an unnatural image. 3) As the swimsuit gets shorter, it has more untidy - trendy image. As the swimsuit gets longer, it looks more tidy and classic. 4) The number of shoulder straps and swimsuit length do not interact with each other in boldness factor, attention factor or attraction factor. However, the number of shoulder straps affects more than swimsuit length in the visual images of the monokini swimsuit.

• Fashion & Textile Research Journal
• /
• v.16 no.4
• /
• pp.635-644
• /
• 2014

This study provides basic reference data for brassiere wearing conditions, design preferences of new silver women (50s-60s) and development of brassiere products. We compiled and compared 163 pieces of brassiere (considering of 105 domestic general brassieres and 58 foreign silver brassieres) analyzed using SPSS Statistics 21 program. A survey was then conducted on the actual wearing, purchasing conditions, design preferences for 176 females (50s-60s). The result of this study are as follows: First, comparing actual product conditions (domestic general products and foreign silver products), the ratio of full cup in cup height, V-shape type in neckline shape, long type in front-end length, wide type in wing width, U-shape type in shoulder strap form, wide type in shoulder strap width, no-wire brassieres in breast wire type, all-in-one type in shoulder strap separation, back type in closure type appeared higher than other types of brassiere in domestic general product. Second, a study also showed that 60s women's wearing time is lower than 50s women's; however, 60s women expressed a higher figure and preference for the purchasing ratio in the department store, full cup in cup height, short type in length of brassieres, wide type in wing width, U-shape in shoulder strap form, small type in shoulder strap width, back type in closure type and no-wire brassieres than those in their 50s. It was found they prefer fabric with a high natural content, nude tone color without decoration & pattern and camisole brassieres.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2019

This study analyzed the pressure, subjective wearing comfort, and design preference of brassiere shoulder straps among women in their 20s and 40s. Experimental clothing was made by different shoulder strap designs on a brassiere. In the four designs (A-D), the front attachment points of the shoulder straps were the same, but the back attachment points were different. Three of them (E, E1, E2) were of a halter neck design, with different front attachment positions. The pressures of A-D were measured at the position passing through the shoulder line (P1), and E-E2 was measured at the back neck (P2) as well as at P1. Subjective wearing comfort and design preference were rated on a 7-point Likert scale. A was determined to exert the highest pressure at the neck side of the design in the pressure measurement analysis of A-E2, whereas E1 exerted the lowest. E was measured to have the highest pressure among the E-E2 designs, whereas E2 had the lowest. Participants preferred A the most and E the least in regards to the subjective wearing comfort of A-E. Thus, participants deem A to be the most comfortable despite the high strap pressure. However, E was the most favored design, despite its poor wearing comfort. Participants' subjective impressions of E-E2 were that E2 was the most uncomfortable, but its design was the most preferred. Consumers' design preferences and subjective impressions of wearing comfort did not match.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.164-164
• /
• 2008

The beach-chair traction position is designed to allow the use of traction while allowing the surgeon to orient the shoulder in an upright position and convert to an open procedure, if necessary. The patient is placed in the beach-chair position under general anesthesia. A three-point shoulder holder (Arthrex, Naples, Florida) is attached to the rail of the operating table on the same side as the surgeon, whereas it is placed on the side opposite the surgeon in the lateral decubitus position. A shoulder traction and rotation sleeve (Arthrex) are affixed to the arm following the manufacturer's instructions. Positioning the thumb toward the closed side of the sleeve ensures a field for the anterior portion of the rotator cuff and prevents the tendency of the suspension apparatus to place the arm in internal rotation. The arm is maintained in 30 to 40 degree abduction and 30 to 40 degree flexion by controlling the length and height of the bar and the location of the universal clamp. The universal clamp allows multiple planes of adjustment to control abduction and forward movement of the arm. The sleeve is attached to the longitudinal traction cable using a sterile hook, and a lateral strap is secured around the proximal portion of the sleeve to the overhead traction cable to ensure a field for glenohumeral reconstruction. The use of a lateral strap permits ideal shoulder positioning for improved access to the anterior and inferior glenohumeral joint. The lateral strap can be released or removed to widen the subacromial space during subacromial decompression or rotator cuff repair. A 10-lb weight is attached to the longitudinal traction cable for an average-sized person.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.287-300
• /
• 2016

The purpose of this study was to review materials that could provide basic data about sports brassieres. In this study, 486 sports brassieres were collected online from 31 brands between November 2015 and February 2016. First, the comparison of compression and encapsulation in sports brassieres identified many different styles. The characteristics of compression brassieres included a cut cup, the front center height of a full cup, round neckline, short front hem, all in one shoulder strap with a patterned racerback design, all in one closure, no wire, and separation cup styles. The characteristics of encapsulation brassieres included a V-shape neckline, mixed round shoulder strap design, back closure, and all in one cup. Second, the comparison of domestic and international sports brassieres sorted the items differently. The characteristics of domestic products included compression brassieres, non-cut cup, the front center height of a full cup, round neckline, short front hem, an all in one shoulder strap with a patterned round design, all in one closure, no wire, and a separation cup. The characteristics of international products included a cut up, racerback shoulder strap design, and an all in one cup. Third, the analysis of domestic and international sports brassieres sizes found that six options were available for domestic compression sports brassieres and nine sizes were available for international products. Domestic encapsulation sports brassieres offered five under bust sizes and five cup sizes. International products offered eight under bust sizes and sixteen cup sizes.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.