• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.46-52
• /
• 2011

Purpose: This study was performed to assess the usefulness of non-anatomical repair for irreparable large and massive rotator cuff tears by the arthroscopic margin convergence technique. Materials and Methods: Twenty-two patients were followed up more than 1 year after non-anatomical repair for irreparable large and massive rotator cuff tears using the arthroscopic margin convergence technique. The clinical evaluation was performed according to the KSS score, the UCLA score and the Visual analogue scale (VAS). The measurement of the acromio-humeral distance was performed using the shoulder anterior-posterior radiographs. The measurement of fatty degeneration and the healing status was performed using the shoulder MRI after 6 months. Results: Among twenty-two patients, follow up MRI was performed in eleven cases. Three cases were well healed, four cases were partial healed and another four cases were re-torn. The KSS and UCLA scores had significantly improved from a preoperative average of 45.0${\pm}$8.014 and 10.8${\pm}$2.302 points to 77.1${\pm}$10.151 and 30.0${\pm}$1.521 points, respectively, and the pain VAS had decreased from a preoperative average of 7.7${\pm}$0.616 points to 3.0${\pm}$1.021 points at the last follow up. Less favorable results were obtained when the patient had a grade of fatty degeneration higher than grade 3 on the preoperative MRI. Conclusion: Non-anatomical repair for irreparable large and massive rotator cuff tears by the arthroscopic margin convergence technique showed good functional results. It seems to be one of the effective treatment methods for irreparable large and massive rotator cuff tears.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.697-705
• /
• 2014

This paper presents a vision based object width measurement method and its application where the light sectioning method is employed. The target object for measurement is a tread, which is the most outside component of an automobile tire. The entire system applying the measurement method consists of two processes, i.e. a calibration process and a detection process. The calibration process is to identify the relationships between a camera plane and a laser plane, and to estimate a camera lens distortion parameters. As the process requires a test pattern, namely a jig, which is elaborately manufactured. In the detection process, first of all, the region that a laser light illuminates is extracted by applying an adaptive thresholding technique where the distribution of the pixel brightness is considered to decide the optimal threshold. Then, a thinning algorithm is applied to the region so that the ends and the shoulders of a tread are detected. Finally, the tread width and the shoulder width are computed using the homography and the distortion coefficients obtained by the calibration process.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.1-7
• /
• 2018

Background: This study was carried out to investigate the effect of mulligan taping group and repeated measurement group on muscle activity and grip strength of adult with forward head posture. Methods: Thirty adults with forward head posture were randomly assigned to each of 15 mulligan taping and repeat measurement groups. The mulligan taping group measured the pre-test and post-test muscle activity and the grip strength three times and compared the mean values. The repeat group was repeatedly measured and measured before and after the experiment, The collected data were analyzed using SPSS statistical program. Results: There was no significant difference between mulligan taping group and repeated measurement group in changes of muscle activity. There was a significant difference between mulligan taping group and repeated measurement group in changes of grip strength. Conclusions: Mulligan taping was applied to an adult with forward head posture, there was no significant change in muscle activity of flexor carpi radialis and palmaris longus, but it seems to improve hand function by re-aligned of nearby muscles by maintaining scapular stability.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.263-267
• /
• 1990

The fat thicknesses of twenty-eight Japanese Black beef steers were measured with an ultrasonic device at eleven points on the cattle prior to slaughter and side dissection. The relation between live fat thickness and both weight and percentage of fat and lean in the carcass was examined. Fat thickness obtained from nine points of the chest, flank and rump regions was found to relate significantly (P<0.01) to both weight and percentage of fat. However, shoulder fat thickness measurements were not significantly related to the weight or percentage of fat or lean in the carcass. Addition of live fat thickness to animal age or live weight as an independent variable markedly improved the precision of multiple regression equations for predicting weight of fat and lean, and percentage of fat. In predicting the percentage of lean, both animal age and body weight were not employed in the multiple regression equation. The residual standard deviation for predicting percentage of fat and lean were 1.93 and 1.87, respectively. The ultrasonic measurement of fat thickness if supposed to be useful to the prediction of carcass composition of beef cattle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.598-617
• /
• 2013

This study analyzes the body sizes of young boys in order to categorize a sizing system for middle and high school uniforms. The study was based on the $6^{th}$ National Anthropometric Survey (Size Korea 2010) data. The sample size consisted of 2,317 boys between the ages of 13 and 18 years. Most measurement items increased significantly relative to age and there was rapid growth between the ages of 13 and 14 years. The growth for the chest and hip was more than the waist. The drop value 1 (difference between chest circumference and waist circumference) and the drop value 2 (difference between hip circumference and waist circumference) increased remarkably from the age of 13 to the age of 15. Therefore, the waist size decreased and chest and hip became wider relative to the age increase. Middle school students had a smaller chest and hip circumference than high school students in the comparative body measurement results for middle school students (13-15 years) and high school students (16-18 years) of the same height group. The somatotype of high school students showed a long trunk length, broad chest and shoulder.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.442-454
• /
• 2011

This study analyzed the present uniform satisfaction, uniform satisfaction followed by physical satisfaction, attitude for uniform, purchase attitude for uniform, satisfaction for design, preference for design, and attitude for uniform alteration behavior by distributing questionnaires to high school girl students in Daejeon City. The results of the study are as follows. The study distributed questionnaires to 319 high school girl students in Daejeon City and analyzed the satisfaction factors for their uniforms. As the result, this study induced four factors. The average value of each factor appeared in order of symbolic satisfaction, management satisfaction, activity satisfaction, and aesthetic satisfaction to show that high school girl students were the most dissatisfactory in aesthetic satisfaction. When the study examined the realities of uniform alteration, it showed that 71.2% of them altered their uniforms. In the alteration of a jacket and a skirt, they altered their jackets shortly and tightly in the mass in the order of: waist measurement, jacket length, breast width, shoulder width, and girth of the chest in a jacket. For a skirt, they altered their skirts tightly as a jacket in the order of: skirt length, waist measurement, and the girth of hip.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.8
• /
• pp.1233-1241
• /
• 2010

This study analyzes the body characteristics of high school boys according to 3 different body types in order to improve the fit of upper garments. First, among the lateral body types, the straight body type was selected from the SizeKorea 3D scanned data and 2D measurement data. Second, high school boys (classified as straight lateral body type) were grouped into type B, A, and Y drop groups. The percentages of type B, type A, type Y are 17.8%, 48.1%, 32.1% respectively. The characteristics of the body types were analyzed. While the bust circumference were the same among the three body types (chest width, back width, back across shoulder, and bust width did not show a significant difference); however, waist and hip measurements showed a significant difference among the three body types. Third, the height of the high school boys ranged between 165cm and 180cm and the bust circumference between 85cm and 97cm. For the bust size categories, type B and type Y are distributed similarly; however, type A is distributed in the smaller bust size categories.

• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.787-795
• /
• 2003

This research studied several somatotypes for children's upper bodies in order to suggest the basic data of bodice patterns of children's clothing. By extracting the component factors from the children's bodices, they were classified into several somatotypes to recognize an individual body type. Three hundred and fifty eight children's wears were estimated as research objects to analyze their somatotypes for the 44 items representing upper bodies through anthropometric measurement and photometric measurement. The results are as follows : 1. Seven factors were extracted as a result of factor analysis. 2. Data were classified into three types as a result of cluster analysis : Type 1 was characterized as low fat body, small skeleton size, and forward belly ; type 2 as high fat body, normal hight, backward shoulder, and the lowered shoulders ; type 3 as medium fat body, tall height, somewhat crouching back, and the rising shoulders. 3. As a results of the discrimination analysis for the three types, the highly discriminated items were height, width of bosom, front center length. weight, width of waist or the length of waist. One could discriminate one's own body type by obtaining the classification function from these five items.

• Steel and Composite Structures
• /
• v.28 no.6
• /
• pp.759-766
• /
• 2018

Friction Stir Welding (FSW) is a solid-state process, where the objects are joined together without reaching their melting point. It has been shown that this method is a suitable way to join dissimilar aluminium alloys. The current article employed hole drilling technique to measure the residual stress distribution experimentally in different zones of dissimilar aluminium alloys AA6061-T6 and AA7075-T6 Butt welded using FSW. Results are compared with those of similar AA6061-T6 plates joined using a conventional fusion welding method called tungsten inert gas (TIG). Also, the evolution of the residual stresses in the thickness direction was investigated, and it was found that the maximum residual stresses are below the yield strength of the material in the shoulder region. It was also revealed that the longitudinal residual stresses in the joint were much larger than the transverse residual stresses. Meanwhile, Vickers micro hardness measurements were performed in the cross-section of the samples. The largest hardness values were observed in the stir zone (SZ) adjacent to the advancing side whereas low hardness values were measured at the HAZ of both alloys and the SZ adjacent to the retreating side.