• Title/Summary/Keyword: short length

Search Result 2,398, Processing Time 0.029 seconds

Varietal Difference for Cool Temperature and Short-day in Nicotiana tabacum L. (연초 품종간 저온단일 감응성의 차이)

  • Jeong, Yun-Hwa;Keum, W.S.;Lee, S.C.
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.13 no.1
    • /
    • pp.69-73
    • /
    • 1991
  • Varietal response to cool temperature(18$^{\circ}C$) and short (8hr.)-day treatment were investigated under controlled conditions of Phytotron in the Suwon Agronomy Experiment Station. Five flue-cured and one burley tobacco varieties (Nicotiana tabacum L.) were used, and the length of treatment ranging from 8 to 32 days at 3-day intervals and also includes continuous treatment up to the plants were flowered. The days to flower decreased significantly than the no treatment when the length of treatment was 11 to 14 days for the varieties NC82, Br.21 and NC22NF, and 17 to 26 days for SPG-28, Mc.944 and TC499, respectively. And also the number of leaves decreased significantly than the no treatment when the length of treatment was 8 days for NC22NF, 11days for NC82 and Br.21, 14 days for Mc.944, and 17 days for SPG-28 and TC499, respectively. The maximum decreasing ratio of the leaf number by the cool temperature and short-day treatment were 47.7 to 58.5% for NC82, Br.21 and NC22NF, and 38.9% for Mc.944, 33.4% for SPG-28 and 29.0% for TC499, respectively.

  • PDF

A Study on Sampling Techniques to Assure the Representativeness of Short-term Equivalent Noise Level (단기간 소음도의 대표성 확보를 위한 소음도 추출기법 연구)

  • Ryu, Hun Jae;Ko, Joon Hee;Chang, Seo Il;Lee, Byung Chan
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.22 no.12
    • /
    • pp.1213-1219
    • /
    • 2012
  • The purpose of this study is to present a guideline to design a short-term manual measurement of environmental noise level, which is more economical and flexible, but less representative than long-term automatic measurement. The proposed guideline can provide the number of measurement times and the length of measurement term required to secure the extent of the representativeness. The data was collected at 4 sites located in Seoul and at 4 sites located outside of Seoul. The probabilities for five-minute equivalent noise levels, Leq, 5min, to stay in an error range from the quarterly representative noise level were used to evaluate sampling techniques. The probability analysis of the daytime period showed that the noise levels measured between 10 am and 2 pm and between 9 pm and 10 pm have the probabilities higher than 60 %. On the other hand, even for the same length of total measurement time, increasing the number of random samplings results in higher probabilities than increasing the length of measurement term.

A study on the device structure optimization of nano-scale MuGFETs (나노 스케일 MuGFET의 소자 구조 최적화에 관한 연구)

  • Lee Chi-Woo;Yun Serena;Yu Chong-Gun;Park Jong-Tae
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.4 s.346
    • /
    • pp.23-30
    • /
    • 2006
  • This paper describes the short-channel effect(SCE), corner effect of nano-scale MuGFETs(Multiple-Gate FETs) by three-dimensional simulation. We can extract the equivalent gate number of MuGFETs(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4) by threshold voltage model. Using the extracted gate number(n) we can calculate the natural length for each gate devices. We established a scaling theory for MuGFETs, which gives a optimization to avoid short channel effects for the device structure(silicon thickness, gate oxide thickness). It is observed that the comer effects decrease with the reduction of doping concentration and gate oxide thickness when the radius of curvature is larger than 17 % of the channel width.

Performance Comparison of CuPc, Tetracene, Pentacene-based Photovoltaic Cells with PIN Structures

  • Hwang, Jong-Won;Kang, Yong-Su;Park, Seong-Hui;Lee, Hye-Hyun;Jo, Young-Ran;Choe, Young-Son
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.311-312
    • /
    • 2010
  • The fabricated photovoltaic cells based on PIN heterojunctions, in this study, have a structure of ITO/poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)/donor/donor:C60(10nm)/C60(35nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline(8nm)/Al(100nm). The thicknesses of an active layer(donor:C60), an electron transport layer(C60), and hole/exciton blocking layer(BCP) were fixed in the organic photovoltaic cells. We investigated the performance characteristics of the PIN organic photovoltaic cells with copper phthalocyanine(CuPc), tetracene and pentacene as a hole transport layer. Discussion on the photovoltaic cells with CuPc, tetracene and pentacene as a hole transport layer is focussed on the dependency of the power conversion efficiency on the deposition rate and thickness of hole transport layer. The device performance characteristics are elucidated from open-circuit-voltage(Voc), short-circuit-current(Jsc), fill factor(FF), and power conversion efficiency($\eta$). As the deposition rate of donor is reduced, the power conversion efficiency is enhanced by increased short-circuit-current(Jsc). The CuPc-based PIN photovoltaic cell has the limited dependency of power conversion efficiency on the thickness of hole transport layer because of relatively short exciton diffusion length. The photovoltaic cell using tetracene as a hole transport layer, which has relatively long diffusion length, has low efficiency. The maximum power conversion efficiencies of CuPc, tetracene, and pentacene-based photovoltaic cells with optimized deposition rate and thickness of hole transport layer have been achieved to 1.63%, 1.33% and 2.15%, respectively. The photovoltaic cell using pentacene as a hole transport layer showed the highest efficiency because of dramatically enhanced Jsc due to long diffusion length and strong thickness dependence.

  • PDF

A Study on Michelle Obama's Hair Styles - Focused on Her Period of the First Lady - (미셸 오바마의 헤어스타일 연구 - 퍼스트레이디 기간을 중심으로 -)

  • Jeoung, Sun-Ju
    • Journal of Fashion Business
    • /
    • v.16 no.4
    • /
    • pp.88-99
    • /
    • 2012
  • Recently the hair style of Michelle Obama, the world's most recognized First Lady of the United States has been loved by the public with her optimistic confidence and as a fashion leader. For Michelle Obama's hair styles by length, a medium-short cut style was expressed in various ways to show her strong will by exposing the forehead, an elegant image by asymmetry hair, or a progressive image by a short volume hair cut. A medium cut style expressed an elegant and intelligent image in shoulder-length and a trendy image using a side parting. A updo hair style produced young, womanly, and casual images using twisting, binding, typing up, and rolling technique according to situations. For hair styles associated with her roles, when participating as a diplomatic delegate, she expressed the President's helpful partner by a soft and womanly image using bobbed hair and half updo technique. For the participation in state occasions, her hair styles were examined in three situations. First of all, she mainly had a neat style, exposing her forehead in official schedules as a political partner to create an intelligent and high-class image. Second, she expressed a strong will with a medium-short style during an election campaign. Finally, she showed an elegant and refined hair style in consideration of T.P.O. during social activity. Michelle Obama overcame her hair's handicap, grasped her images associated with hair length, and expressed hair strategically according to her roles as the first African-American First Lady of the United States.

The First Outbreak of Chorioptes texanus (Acari: Psoroptidae) Infestation in a Cattle Farm in Korea

  • Suh, Guk-Hyun;Hur, Tai-Young;Lim, Sun;Shin, Sang-Min;Kwon, Jung-Kee;Cho, Shin-Hyeong;Lee, Chai-Yong;Shin, Sung-Shik
    • Parasites, Hosts and Diseases
    • /
    • v.46 no.4
    • /
    • pp.273-278
    • /
    • 2008
  • Mites in the genus Chorioptes cause a mild form of skin disease in both domestic and wild ruminants. In July 2006, dermatitis characterized by alopecia, marked lichenification, accumulation of crust, and fissuring was recognized in 14 out of 200 Holstein dairy cattle raised in the cattle farm of the National Institute of Animal Science in Cheonan, Republic of Korea. Skin lesions were distributed mainly over the tail base, and sacral and perineal regions. Microscopic examinations of skin scraping samples from severely affected areas revealed numerous mites of all developmental stages. Morphologically, pedicels of the mites were short and unjointed. The tarsal suckers occurred on the pedicels of all the legs in the male worm and on the first, second, and fourth pair of legs in the adult female worm. A single long seta at the tarsus of legs III and the length of legs II being about twice as long as legs IV in adult male mites were observed. Arising anterior to the inner-most spatulate seta was a short seta with an average of $26.4{\pm}5.8{\mu}m$ in length. Also, the length of setae #4 on the opisthosomal lobes was relatively short. Based on these observations, the mites were identified as Choriptes texanus. Although the chorioptic mange may not influence the mortality rate in the affected farm, reports indicate that a decline in milk production can be observed. This is the first report of chorioptic infestation in a cattle farm from Korea.

Silhouette Denoising for the Stone Cultural Heritages (석탑 문화재의 실루엣 추출을 위한 노이즈 제거)

  • Kim, Hak-Ran;WhangBo, Taek-Keun
    • Journal of Digital Contents Society
    • /
    • v.10 no.3
    • /
    • pp.381-388
    • /
    • 2009
  • This paper proposes a denoising method for the contour edges and crease edges of silhouette obtained from 3D scanned data of stone cultural heritages. It is often the case that the silhouette involves noise in the form of short-length line segments, due to rough surfaces of stone cultural heritages, weathering, and technical difficulties arising in data acquisition. Thus the removal of the short-length line segments from the contour edges and crease edges can result in a clear and accurate silhouette. An efficient computational algorithm is introduced to count the continuity of line segments; edges having not more than 3 line segments are removed. It has been verified that the new method is more effective than threshold-based silhouette extraction methods for stone heritages. Our method is applicable for various other data which are deteriorated by short-length line segments.

  • PDF

A Study on Changes of Practical Korean Costume (생활한복의 변천에 관한 연구)

  • Choi, Kyung-Soon;Kim, Sun-Ryung
    • Fashion & Textile Research Journal
    • /
    • v.1 no.1
    • /
    • pp.34-42
    • /
    • 1999
  • The purpose of this study was to change practical korean costume in 20C. In the early 20C, inflow of western civilization started to change korean costume. Since then gradually changes to be simple in Korean costume. Results of this study can be summarized as follows: Traditional jacket (jeo-go-li) gradually began to be long to waist line. This jacket length was to be long and it sleeve is to be short in early 2OC. Traditional skirt (Chi-rna) length was short to the calf of the leg. Traditional wide skirt was gradually to be narrow and pleats shape look as if it in go-gu-Ryeo Dynasty. The width of pleats was about 3~5 cm, be one-sided, look as if it western style in today. But pleats skirt already existed on a women's of the upper classes in go-gu-Ryeo Dynasty. Women's long Coat (do-lu-ma-gi) length was short to under hip line in late 20c. In this way, the practical idea, the factor of design was because of western idea in civilization ages, early 20C. Since then gradually reformed to be simple in Korean costume. Assuming that the trend of simplification in Korean costume is related to the idea of practical. Therefore Korean costume of living or a reformed Korean costume to be design of practical, functional, convenient, economically. And it must have to traditional idea, it is only beauty of shape, pattern, line, fabric in Korean costume.

  • PDF

Lower body shape classification of adolescent men's students

  • Cha, Su-Joung
    • Journal of the Korea Society of Computer and Information
    • /
    • v.23 no.9
    • /
    • pp.97-105
    • /
    • 2018
  • The purpose of this study was to analyze the measurement data of 13 ~ 18 year old male students and to characterize the body shape of the lower body, Through this, I tried to provide basic data for the production of pants for adolescent men's students. As a result of analyzing the body shape factor of the lower half, two factors were classified. 'Vertical factor' of the lower body composed of the circumference, thickness, and width, and the 'horizontal factor' of the lower body composed of the length and height. The body shape of the lower half was classified into four categories according to the circumference and length of the lower half of the male students, such as 'short bird legs', 'long crane legs', 'short pillar' and 'long pillar'. In the study of Hong Eun-hee (2005), body type was classified according to horizontal factor and vertical factor like this study. By age, boys aged 13 to 14 can see that the lower body is thin and short, the lower body is thin and long body is 15-16 years old, and the lower body is relatively thick and long body is 17-18 years old. As the age increases, the growth in the vertical direction occurs first and the growth in the horizontal direction occurs. It is thought that it is necessary to set a different amount of allowance for setting the length and the circumference according to the age of the youth. When the age is young, the amount of allowance in the circumferential direction should be increased, and the amount of allowance in the longitudinal direction after 15 years of age should be increased more than other age groups.

Case-control study of the treatment of postaxial polysyndactyly of the foot: Comparison of surgical results after removal of the fifth or sixth toe

  • Woo, Soo Jin;Kim, Byung Jun;Kwon, Sung Tack
    • Archives of Plastic Surgery
    • /
    • v.48 no.1
    • /
    • pp.91-97
    • /
    • 2021
  • Background In postaxial polysyndactyly of the foot, the choice of which toe to excise is controversial. It is often treated by resection of the fifth toe to save the lateral neurovascular bundles of the sixth toe. However, the sixth toe is often short and laterally deviated, which may require wedge osteotomy, potentially shortening the phalanx and compromising circulation. This study outlines an individualized method to spare the length and axis of the fifth toe in polysyndactyly with a short and deviated sixth toe. Methods We retrospectively analyzed 38 patients who underwent surgery between 2006 and 2019. The fifth toe was spared in 18 cases, and the sixth toe in 20 cases. The ratios of the forefoot width, angle difference, and toe length were compared between the affected and unaffected sides postoperatively. Complications and subjective judgments on cosmetic results were recorded and compared. Results No significant between-group differences were observed for sex, age at surgery, or the follow-up period. The forefoot width ratio did not significantly differ between the groups. However, the angle difference and toe length ratios showed significantly better results in the fifth toe-spared group than in the sixth toe-spared group (P<0.05 and P<0.01, respectively). There were no cases of impaired circulation, and subjective evaluations revealed satisfactory results in the fifth toe-spared group. Conclusions In cases with short and deviated sixth toes, sparing the fifth toe is an effective method of cosmetic treatment. The surgical results were satisfactory, with an improved appearance and no residual deformities.