• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.505-512
• /
• 1988

Since the propagation of a short fatigue crack is directly related to the large crack which causes the fracture of bulk specimen, the detailed study on the propagation of the short crack is essential to prevent the fatigue fracture. However, a number of recent studies have demonstrated that the short crack can grow at a low applied stress level which are predicted from the threshold condition of large crack. In present study, the threshold condition for the propagation of short fatigue crack is examined with respect to the microstructure and cyclic loading history. Specimens employed in this study were decarburized eutectoid steels which have various decarburized ferrite volume fraction. Rotating bending fatigue test was carried out on these specimens with the special emphasis on the '||'&'||'quot;critical non-propagating crack length.'||'&'||'quot; It is found that the reduction of the endurance limit of their particular microstructures can be due to the increase of the length of critical non-propagating crack, and the quantitative relationship between the threshold stress .DELTA. .sigma. $_{th}$ and the critical non-propagating crack length Lc can be written as .DELTA. .sigma. $_{th}$, Lc=C where m, C is constant. Further experiments were carried out on the effect of pearlitic structure and cyclic loading history on the length of critical non-propagating crack. It is shown that the length of critical non-propagating crack is closely related to both pearlite interlamellar spacing and cyclic loading history.ory. cyclic loading history.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.111-114
• /
• 2001

Short-length and long-length Ni tapes were fabricated by powder processing, cold rolling and recrystallizatioon heat treatment. In the case of the short-length Ni tape, both in-plane and out-of-plane texture were less than $10^{\circ}$. In the case of the long-length Ni tape, the degree of texture is lower than that of the short-length Ni tape. The relationship between the texture formation and the processing parameter is reported.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.366-376
• /
• 2008

The model tests of short pile with very small pile length/diameter(L/D) were performed in this paper. Varying the pile diameter, length, and the lateral loading point, the lateral resistance and behavior of very short pile were studied in this model tests. The experimental and analytical results are as follows. The lateral ultimate resistance of short pile in sands was the maximum at the point of h/L=0.75, regardless of pile length/diameter(L/D). As the pile diameter is larger, the lateral ultimate resistance of pile with L/D=1 decreases a little and the lateral resistance increases according to the ratio of pile length/diameter. As the lateral loads are acting on the pile, the displacement of pile head is maximum at the pile top of h/L=0, but minimum at the middle point of the pile. And if the loading point is under the middle of pile, the displacement of pile head occurs oposite in the loading direction, but its magnitude is very small.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.1-16
• /
• 2021

This study classified short adult male body types and identified characteristics by body type according to Size Korea's 7th human system measurement data for men in their 20s to 60s. There were four body types for short adult males. Type 1 was a 'short bird legs-normal body shape' with an average body size, low body height, short torso length, thin legs, and no sagging shoulders. Type 2 was a 'short torso thin body' with a small body size, a slim body, a high body height, a short torso length and no sagging shoulders. Type 3 was a 'thick leg-overweight body shape' with a large body size, thick legs, low body height, small shoulder length and obesity. Type 4 was a 'long bird legs-normal body' with a normal body size, high body height, thin legs, long torso and sagging shoulders. The development of clothing design and pattern reflecting the body shape characteristics of short adult males should be improved to fit clothing and suitability. It is necessary to increase the satisfaction of ready-to-wear for consumers with various body types by adding the size for shorter men through a subdivision of the ready-made size system.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.17-23
• /
• 2010

Since the propagation of a short fatigue crack is directly related to the large crack which causes the fracture of bulk specimen, the detailed study on the propagation of the short crack is essential to prevent the fatigue fracture. However, a number of recent studies have demonstrated that the short crack can grow at a low applied stress level which are predicted from the threshold condition of large crack. In present study, the threshold condition for the propagation of short fatigue crack is examined with respect to the micro-structure and cyclic loading history. Specimens employed in this study were decarburized eutectoid steels which have various decarburized ferrite volume fraction. Rotating bending fatigue test was carried out on these specimens with the special emphasis on the "critical non-propagating crack length" It is found that the reduction of the endurance limit of their particular micro-structures can be due to the increase of the length of critical non-propagating crack, and the quantitative relationship between the threshold stress ${\sigma}_{wo}$ and the critical non-propagating crack length $L_c$ can be written as ${\sigma}_{wo}{^m}{\cdot}L_c=C$ where m,C is constant. Further experiments were carried out on cyclic loading history on the length of critical non-propagating crack. It shown that the length of critical non-propagating crack is closely related to cyclic loading history.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.5
• /
• pp.431-435
• /
• 1992

This experiment was carried out to evaluate Korean red rices as useful genetic resource. Semi-wild red rices were collected from farmer's field of the Korean peninsula from 1988 to 1991. The collected red rices were classified into two groups according to length /width ratio of paddy rice and ecological characters. One was long grain red rice and the other was short grain red rice. Those were evaluated in yield components, culm length and panicle length. Mean number of panicles per hill of collected long grain red rices was 21.5 and that of short grain was 11.8. Number of spikelets per panicile of the long and short grain red rices were 86.1 and 108.7, respectively. 1000 grains weight of long grain was 20.1g and that of short grain was 20.2g. Spikelet fertility of long and short grain were 80.4% and 79.4%, respectively. Culm length of long grain was 103.6cm and that of short grain was 94.8cm. Panicle length of long and short grain were 22.1cm and 21.3cm, respectively. Number of panicles per hill, number of spikelets per panicle and culm length were significantly different between the two groups, however no differences, in panicle, length and seed fertility were found between the two groups.

• Journal of the Korean Society of Safety
• /
• v.8 no.1
• /
• pp.54-58
• /
• 1993

The fatigue growth behavior of short cracks were studied various load ratios. Computer-aided unloading elastic compliance method was employed to measure the closure and the length of short cracks. In the dc/dN-$\Delta$K relationships. the decreasing behavior of the growth rate of short cracks is due to the decrease of crack opening ratio with increasing crack length. Irrespective of load ratio. the growth rate of short cracks can be well decribed in terms of the effective stress intensity factor range $\Delta$K$_{eff}$, which is calculated on the base of crack closure. dc/dN-$\Delta$K$_{eff}$ relationships of short cracks are found to coincide well with the corresponding long crack relationships. accordingly. the growth rate of short cracks can be predicted using that of long cracks.ort cracks can be predicted using that of long cracks.cks.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.45-49
• /
• 2007

The analytical transport model in subthreshold regime for double gate MOSFET has been presented to analyze the short channel effects such as subthreshold swing, threshold voltage roll-off and drain induced barrier lowering. The present approach includes the quantum tunneling of carriers through the source-drain barrier. Poisson equation is used for modeling thermionic emission current, and Wentzel-Kramers-Brillouin approximations are applied for modeling quantum tunneling current. This model has been used to investigate the subthreshold operations of double gate MOSFET having the gate length of the nanometer range with ultra thin gate oxide and channel thickness under sub-20nm. Compared with results of two dimensional numerical simulations, the results in this study show good agreements with those for subthreshold swing and threshold voltage roll-off. Note the short channel effects degrade due to quantum tunneling, especially in the gate length of below 10nm, and DGMOSFETs have to be very strictly designed in the regime of below 10nm gate length since quantum tunneling becomes the main transport mechanism in the subthreshold region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2C
• /
• pp.173-177
• /
• 2008

In this paper, we improve performance of Low Density Parity Check (LDPC) codes with adding a large number of short cycles. Short cycles, especially cycles of length 4, degrade performance of LDPC codes if the standard BP (Belief Propagation) decoding is used. Therefore current researches have focused on removing cycles of length 4 for designing good performance LDPC codes. We found that a large number of cycles of length 4 improve performance of LDPC codes if a modified BP decoding is used. We present the modified BP decoding algorithm for LDPC codes with a large number of short cycles. We show that the modified BP decoding performance of LDPC codes with a large number of short cycles is better than the standard BP decoding performance of LDPC codes designed by avoiding short cycles.

• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.621-640
• /
• 2017

The double-row long-short composite anti-sliding piles system is an effective way to control the landslides with high thrust. In this study, The double-row long-short composite anti-sliding piles with different load segment length (cantilever length) and different pile row spacing were studied by a series of physical tests, by which the influences of load segment length of rear-row piles as well as pile row spacing on the mechanical response of double-row long-short composite anti-sliding pile system were investigated. Based on the earth pressures in front of and behind the piles obtained during tests, then the maximum bending moments of the fore-row and the rear-row piles were calculated. By ensuring a equal maximum moments in the fore-row and the rear-row piles, the optimum lengths of the rear-row piles of double-row long-short composite system under different piles spacing were proposed. To investigate the validity of the reduced scale tests, the full-scale numerical models of the landside were finally conducted. By the comparisons between the numerical and the physical test results, it could be seen that the reduced scale tests conducted in this study are reliable. The results showed that the double-row long-short composite anti-sliding piles system is effective in the distribution of the landslide thrust to the rear-row and the fore-row piles.