• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.1021-1029
• /
• 2018

The marine buoys are operated in various domains, which are navigation route and danger maker, weather and environment monitoring, military strategical element, etc. If the marine buoy is damaged, there consumes many cost and time for recovery or replacement, because of severe environmental condition, and causes a risk possibility of secondary accident. In this paper, we developed an active monitoring and approach alarm providing system using trail cameras and AIS for protection for the marine buoys. To do this, we analyzed existing researches and similar systems, extracted requirements for enhancement, and designed the system architecture that applied the enhanced elements. The main considerations of system enhancement are: integration of AIS and trail cameras, adopting of phased alarm technique by approaching ships, applying of selective communication module, conducting the image processing of ships for providing alarm, and applying thermal cameras. After that, we developed the system using designed architecture and verified effectiveness of the system based on laboratory or field-level tests.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.2
• /
• pp.47-58
• /
• 1997

The purpose of this study is to find out the impacts of VTS on the marine safety and users' opinion on the VTS which have been being operated in the port of Pohang for the last 3 years and is to suggest a guideline to the successful operation of VTS in the future. This study is based upon the questionnaire survey and the respondents include 236 masters/mates of merchant vessels who have visited the port of Pohang and 6 pilots who have been working in the port. From the questionnaire results, this study notes the following conclusions related to the VTS operations. (1) A few of the respondents (mainly foreigners) do not understand the entering procedure of the port and the fundamental concept of VTS. Accordingly, the more active VTS services have to be provided for the mariners. (2) It was found that themost dangerous factors in tehvicinity of the port were the floating materials, fishing nets, andillegal fishing activities inthe fairway. Therefore, the proper surveillance, stricter enforcement of Acts and the instructive education for the fishermen are required to avoid the risks. (3) A majority of the respondents agreed the VTS has contributed to the safety of vessel traffic, and they pointed out ' the assiatances in reduced visibililty conditions' is the most important task of VTS. The amount of 75.6% of the respondents answered that they have experienced the assistance from VTS more than 1 time since the system was established in the port of Pohang . Also 44.2% of the respondents considered they were able to avoid marine casualties such as collision, ramming or agrounding with the VTS assistances. (4) 49.2% of the respondents preferred the passive information services , while, 38.8% of them preferred the positive control advices in the case of encountering any potential risks. VTS iperators have to consider seriously when they provide the positive control advices of ship's course and speed. (5) A majority of the respondents confirmed that the prot and its approaches is suitable for the VTS coverge . To extend the service areas of the VTS and to improve radar detecting ability, the use of radar transponders are seen as the ideal method. (6) A minority of the respondents pointed out 'the improper orders or recommendatinos caused by the poor decision making' firstly, ' the language problem(sea-speaking in English)' secondly, as the deficiency of personal qualification. It seems, therefore, theat the personal efforts of the operators and systematic training programmes for them are necessary to solve the problems.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.173-179
• /
• 2006

A number of perforated plates are utilized for the passage of the crew and the equipment, reducing weight and the arrangement of piping. Hull girders in double bottom and floor plates are the typical parts which have those plates in a ship structure, and the perforated plate is usually positioned at the place which has less loading without local strength problems. In the case of utilizing the plate inevitably at the place which has large strength, an opening of the plate has large effect on the buckling strength due to in-plane rigidity and ultimate strength. Therefore the assessments of the elastic buckling strength and the ultimate strength for the perforated plate are the essential requirements for determining the dimensions of the parts at the initial design stage. With above reason, a need of the reasonable assessments for the elastic buckling strength and the ultimate strength has evolved. The numerical series analysis with the consideration of the effect due to various aspect ratios and slenderness ratios were performed using finite element method in this research. Simple formulas for the design are also proposed from the above analysis.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.519-526
• /
• 2013

In managing shipping business, the concept of seaworthiness of the vessel has developed in accordance with the development of the shipping industry. However, despite of the development of the vessel's seaworthiness, marine accident has continuously occurred at sea. International Maritime Organization(IMO) has paid attention to the research and investigation of Human Error in shipping operations in addition to physical seaworthiness of the vessel. In 1994, IMO adopted the "International Management Code for the Safe Operation of Ships and for Pollution Prevention(ISM code)" of "SOLAS 1974" Annex, to take countermeasure against this human error. In 1999, Korea adopted the 'ISM Code' and then enacted the Maritime Safety Act (previously Maritime Traffic Safety Act). The Maritime Safety Act regulates necessary qualifications of the Human Resources of shipping companies for establishment and implementation of the safety management system. However, there has been a discrepancy between shipowners and ship management companies in interpreting the legislative texts, finally causing confusion. In this paper, I would like to examine the deficiencies in the regulation on the standard of qualifications of the Designated Person under the Maritime Safety Act and thereby suggest any possible improvements in it.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.205-213
• /
• 2012

This study focused on the supply-demand and training system of the crew for domestic coastal shipping. First of all, it forecasted the prospect and effect in the future of the crew supply-demand through the analysis to the current situation of crew employment and the internal and external environment changes. Next, it suggested the specific role and alternatives of government, industry and educational institutions after the comparison and examination of the sailor policies among Korea and major shipping countries. In regard to the demand of crew manpower in coastal shipping, it figured out the bottoms and the current circumstances of sailors, and it could anticipate the future demand by the gradational approach. According to the findings, firstly the result of this simulation by the changes of the ship numbers demonstrated that the demand over the next 10 years will be 7,890~8,025 in the case of the growth 0.4%, and 7,894~8,063 in 0.5%. Secondly, assuming the growth 0.1~1%, the result illustrated that the demand will come to 7,879~8,258. This means the fact that the additional manpower has to be input to 20~430 annually from now on. To conclude, this study showed the more rational numbers about the supply-demand than the past researches and displayed the systematic approach to supply and train the crew in domestic coastal shipping.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.199-206
• /
• 2009

Since Emma Maersk, which is a container vessel capable of holding a freight capacity of 11,000 TEU, was launched early last year, the appearance of the ULCS (Ultra Large Container Ship) will be expected in 5 years. That requires the high productivity, the high technology, the automation, and the high efficiency in port operations. GTO (Global Terminal Operator) and port equipment companies are striving for the prior occupation of the port market and the development of the port technology. Within the country, however, there has been few systematic, analytic, and detailed technology road map, and the effective execution of the development policy for the port technology and the activation of port industries has not been achieved. In this study, we deduces the development subject of the domestic port technology and analyzes the priority of them. In conclusion, we establishes the macro technology road map and the product-related road map for container ports in Korea.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.138-147
• /
• 2021

The need for analysis of the operational efficiency and productivity of the Busan Port Container Terminal is increasing because of the Hanjin Shipping's bankruptcy and the re-establishment of the Maritime Alliance. This paper analyzes the efficiency and productivity of five Busan New Port Container Terminal companies by using the DEA analysis and Malmquist productivity index model based on the port construction disclosure data and the collected terminal internal data. According to the analysis, the average efficiency of the five container terminals increased in 2018 but declined slightly in 2019, and the Malmquist index showed that all terminals except A have advanced productivity. Additionally, relative to facility productivity, operators at the North Container Terminal had higher facility productivity than operators at the Busan New Port Nam Container Terminal, and regarding capital productivity, the D terminal ported by HMM, a national shipping company, was the highest in facility productivity. Regarding labor productivity, the C terminal showed the highest productivity, and regarding ship work productivity, the A terminal showed the highest productivity.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.367-374
• /
• 2022

The purpose of this study was to propose a deep learning algorithm that applies to the fault diagnosis of fuel pumps and purifiers of autonomous ships. A deep learning algorithm reflecting the time dependence of the measured signal was configured, and the failure pattern was trained using the vibration signal, measured in the equipment's regular operation and failure state. Considering the sequential time-dependence of deterioration implied in the vibration signal, this study adopts Conv1D with sliding window computation for fault detection. The time dependence was also reflected, by transferring the measured signal from two-dimensional to three-dimensional. Additionally, the optimal values of the hyper-parameters of the Conv1D model were determined, using the grid search technique. Finally, the results show that the proposed data preprocessing method as well as the Conv1D model, can reflect the sequential dependency between the fault and its effect on the measured signal, and appropriately perform anomaly as well as failure detection, of the equipment chosen for application.