• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.93-97
• /
• 2005

Sea operation monitoring system is a system for the automatic ship operation that is used on the variety sea operations such as laying optical cables on the sea between the countries, laying cables on the seabed for a remote island, laying pipelines for the natural gas, and so forth. This system processes data which optained through setting up environment and input from several sensors, and display GPS information with ENC data. And this system processes not only data of root file about sea operation, but also realtime information from PDA of client wirelessly connected with AP on wireless LAN, In addition, this system can improve efficiency of the operation as a result of enabling free movement within valid range. This paper design and Implementation Monitoring system from above appropriate to the embedded system, and improve competitive power of ship through prevention of a ship accident, to keep minimizing operation loads and support both the automatic ship operation and the safety voyage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.4
• /
• pp.260-271
• /
• 1993

Due to depletion of fish resources as time goes on, the trawl fishing industries which have caught the demersal fish is confronting with financial difficulties. For the purpose of breaking these difficulties, trawlers are expanding the fishing targets to the midwater from bottom stock. The trawlers become to be able to detect the fish schools not only vertical but also horizontal direction by equipping the sonar system on board. Even though the operator locates the fish school by sonar, it is not easy to make a desirable catch of the fish school which is detected, for the reason of the maneuverring characteristics of trawler. For the purpose of enhancing the efficiency of a fish catch, the auther performed a series of on board experiments to investigate the maneuverablilites of midwater trawaler. The obtained results are summerized as follows: 1. The higher the RPM of main engine, the smaller the magnitude of turning circle. And it is smaller in the right than in the left turning 2. Towing speed varies irregularly under turning novenment. When the RPM of main engine being 560, 680 the angular velocities are 11.3deg/min, 22.5deg/min respectively. 3. The difference of new course distance between calculated by maneuverring indices and measured by experimental ship is high when altering course being large and towing speed low. 4. The faster the towing speed is, the shorter the new course distance becomes. When towing speed is same in right and left turning movement, the now course distance is shorter in case of right turning movement than in left. 5. It is considered to be convenient for a navigator to utilize the curves for altering course in order to steer the ship rapidly and accurately.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.195-200
• /
• 2010

Basing on the recommendation and guideline of IALA, Korean VTS authority made an instruction about the training and qualification of VTS operators, and three model courses for training have been performed at a training institute which has one VTS simulator. However, the simulator has not been enough to make training fully satisfactory because of several signs of limitations including inaccurate method for calculating ship's movement and inconvenient location for training. In this paper, a new simulator was proposed to make up for the weak points replacing the current simulator. The proposed simulator adopts mathematical model for calculating exactly ship's movement which heightens the effect of training with simulator. And also it can be used through Internet so as to make long-distance training possible without visiting the training center. The effectiveness and the convenience of training with the proposed simulator are expected to be improved.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.575-580
• /
• 2013

The IMU(Inertial Measurement Unit) which is the expensive equipment has been used as a special limited area, usually in measurement of posture of applying to the areas of ship, submarine, aircraft and military equipment application. However, in the current situation, MEMS AHRS technology can replace the high-priced IMU in MEMS AHRS selected application field. In this paper, wireless hull motion measurement system was suggested for measuring key elements of ship's movement such as rolling, pitching and yawing using gyro, acceleration and magnetic sensors of AHRS. In order to reduce the error such as instantaneous acceleration, effects and vibration of geomagnetic, we have adopted the sensors equipped with Kalman filtering. The Wireless hull motion measurement system using AHRS sensors was tested in actual ship and it could easily be applied in limited installation circumstances of the ship. In the future, this system can be useful in the navigation safety and marine accident analysis by using with ship equipment such as INS or VDR in the maritime.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.129.1-129.1
• /
• 2010

Since the commencement of the fuel cell business in 2007, POSCO POWER has been the major supplier of the MCFC (Molten Carbonate Fuel Cell), which is the most commercialized stationary fuel cell system in the world. With its quite, yet active movement, more than 20MW MCFC systems have been installed and are operating in Korea. While trying to localize the components and set up a firm supply chain in Korea to provide more reliable and cost-competitive products to its customers, POSCO POWER is also devoting itself to developing new MCFC application products. One such product is a back-up power system, in which a back-up algorithm is embedded to the present system so that the product can work as a back-up generator in case of grid failure. The technology to enhance load following capability of a stack module is also being developed with the back-up algorithm. Another example is a building application, the goal being to make the present Sub-MW product suitable for urban area. For this, downsizing and modularization are the main R&D scope. The project for developing ship service fuel cell for APU application will launch soon as well. In the project, a system which can operate in marine environment, and reforming technology for liquid logistic fuel will be developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.801-807
• /
• 2005

Any failure of intake and exhaust valves of marine diesel engine must be regarded as serious, and any steps which can be taken to prevent such failure are desirable. The purposes of this study is to investigate and to analyse the failure causes of intake and exhaust valves for marine diesel engine during sea trial after completion of overhauling. In this study, to analyse the failure causes, we have carried out on board inspection, fractography test and discussion based on the specimen and repairing report provided by the ship owner. From the results of above inspection, test and discussion, it has been considered reasonable to conclude that the causes of damaged valves of the ship are as follow ; 1) During operation, the stick or seizure of valve spindle occurred and hence the movement of exhaust valve spindle was to be resisted and subsequently the engine was to be operated under an unappropriated valve timing and the exhaust valve sustained the repeated loads exceeding the fatigue strength of valve material. 2) By the loads above described, the fatigue fracture was initiated at the structural noncontinuous part of exhaust valve spindle, and then the valve head was finally fractured and dropped in the cylinder. 3) The fractured exhaust valve head impacted the intake valve at various direction to be bent or damaged.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.68-77
• /
• 2020

The shipbuilding and offshore industry is a large and complex assembly industry, which causes many safety accidents. The major accidents in the shipbuilding and offshore industry workplaces are stenosis, falling objects, dust, fire, explosions, and gas poisoning. The accident by worker in this industry mainly has three factors: frequent movement, narrow work space, and increased use of subcontractors. To control these factors, it is necessary to monitor the worker's location and work status. In this paper, a worker location monitoring system using inaudible sound wave was designd that can be used in environments with many metal barriers. The process included deriving stakeholder requirements, transforming to system requirements, designing system architecture, and developing prototype. The prototype was validated by third-party testing agency. As a result, it satisfied the designed performance and verified its feasibility.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.55-61
• /
• 1989

Nowadays much efforts for evaluating the productivity of port physical distribution system to meet the rapid change of the port and shipping circumstances has been made continuously all over the world. The major part of these efforts is the improvement of the productivity of cargo handling system. The cargo equipment system as infrastructure in the cargo handling system is organized well in some degrees, but the management system of manpower as upper structure is still remained in an insufficient degree. There is little study, so far, on a systematic research for the management of port labor gang, and even those were mainly depended on rule of thumb. The object of this study is to introduce the method of optimal allocation and assignment for the labor gang in single ship, which was suggested as a first stage in dealing with them generally. The problem of optimal allocation and assignment of the labor gang can be (I) formalized with multi-stage allocation and assignment of the labor gang can be. (II) dealt with two stages in form of hierarchic structure and moreover, (III) The optimal size of labor gang was obtained through dynamic programming from the point of minimizing the summation of labor gang in every stage, (IV) For the problem of optimal assignment, the optimal policy was determined at the point of minimizing the summation of movement between hatches.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.1-11
• /
• 1991

As increasing needs of marine transportation , world merchant fleet and ship's size were enlarged and it caused frequent disasters in human lives and natural environment. By the reason of the above, they started to establish the Vessel Traffic System (VTS) at the European coast in 1960' and most of advanced contries established and managed it to prevent the sea traffic accidents in these days. The concept of traffic control at sea can be divided into three types. First, the initial gathering of informations about ship's identity and movement etc.. Second, monitoring of the traffic flow and amendment of instructions. Third , organization and direction of ships by allocating routes and speeds. Where the goal of traffic control is safety of traffics and developing effectiveness of navigation channel, if traffic volume is less tan channel capacity then the above first or second level of control would be sufficient but if it is bigger than that , more positive policy of control should be adopted as same as third type of the above. In this paper where the strategy of VTS is focused on the control of traffic density to be spread equality, as possible , all over the navigation channels and also improvement of effectiveness , it suggests algorithm to assign the vessels to the channels with balanced traffic density , and other algorithms using D.P. to sequence the vessels assigned to one channel in optimum order which decreases the mean waiting time in sense of channel effectiveness with numerical examples.