• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1754-1766
• /
• 1993

The application of VXIbus system, an Industry standard, is rapidly spreading with its ability to offer the easiness of integration from GPIB and the fast data transmission from VMEbus system. Compared with VXIbus Register Based Device, VXIbus Message Based Device has a drawback In the aspect of speed. But it is possible to utilize high level ASCII commands to control a Message Based Device, therefore system integration is much easier with Message Based Device than with Register Based Device. And, the FFT analyzer is an instrument for signal analysis which can be inexpensively implemented to be fast and have high resolution. Its wide ability of analysis presents numerous application. So, it is necessary to apply VXIbus system to FFT analyzer. In this paper, the implementation of FFT analyzer is performed using a DSP module and by implementing all A/D conversion circuit and a control module which performs VXIbus interface. The device can be controlled by Slot0 Commender which supports VXIbus Shared Memory Protocol through VXIbus.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.347-354
• /
• 2000

This paper presents the efficient mechanisms for concurrency control and writing authority control in collaborative writing system are represented by the tree structures which consist of the logical objects and the content objects connected to the terminal objects of trees. For concurrency control, we adopted the approach to extend the multiple-granularity-locking-scheme. This scheme allows us to lock any objects at each level of the hierarchy. We also defined the locking compatibility table by analysing the operations applicable to any objects at each level of the hierarchy. We finally suggest the extended-multiple-granularity-locking mechanism which uses the locking compatibilility table for deciding to lock an object. This scheme gives the benefit to maximize the possibility of concurrent accessing to the shared objects. In addition, we suggest a mechanism for writing authority control which prohibits the Non-Group users from modifying the shared objects based on the concept of Group/Non-Group The proposed mechanism allows us to protect copyright very reasonably.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.13-20
• /
• 2017

A method is proposed for scheduling sensor accesses to the shared network in a networked control system. The proposed method determines the access order in which the sensors are granted medium access through minimization of the state estimation error covariance. Solving the problem by evaluating the error covariance for each possible ordered set of sensors is not practical for large systems. Therefore, a convex optimization problem is proposed, which yields approximate yet acceptable results. A state estimator is designed for the augmented system resulting from the incorporation of the optimally chosen communication sequence in the plant dynamics. A car suspension system simulation is conducted to test the proposed method. The results show promising improvement in the state estimation performance by reducing the estimation error norm compared to round-robin scheduling.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.6
• /
• pp.403-408
• /
• 2005

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random This paper proposes and presents a new efficient network architecture for Reflective Memory System (RMS). A time to copy shared-data among nodes effects critically on the entire performance of the RMS. In this paper, the recent researches about the RMS are investigated and compared. The device named Topology Conversion Switch(TCS) is introduced to realize the proposed network architecture. One of the RMS based industrial control networks, Ethernet based Real-time Control Network (ERCnet), is adopted to evaluate the performance of the proposed network architecture for RMS.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3_spc
• /
• pp.259-278
• /
• 2013

At the center of the repeating evolution of IT industry, there is mobile computing in the ubiquitous environment, and the increasing usage of smart phones contribute more to its growth. P corporation co-developed with Google and implemented smart work system called SWP for the purpose of 'communication and collaboration with co-workers' beyond the general goal of increasing productivity and comfort of employees. The primary objective of this study is to objectively analyze the influence of the effect factor from end user's perspective and user satisfaction on SWP usage, intention for continuous usage and individual performance. To accomplish this research purpose, this study established research models and hypothesis by collective review about information system success models, and tested the research hypotheses using the structural equation modeling technique by data collected from 320 SWP system users of P corporation. Variations for system satisfaction evaluation standard are 1)SW system usage 2) intention for continuous usage 3) individual performance, effect variations are 1) social factors 2) technical factors 3) combination of social and technical factors. Therefore, this study is about influence factors on success of SWP system and how the factors impact the outcome. The test results of this research model is summarized as follows. Firstly, system user's satisfaction had positive impact on all three; SWP system usage, intention for continuous usage and individual performance. Secondly, social factor 'SWP control system' and technical factor 'information quality' and 'system quality' had positive impact on SWP system user satisfaction, while social factor 'shared value' and technical factor 'service quality' did not have significant effect on user satisfaction. Shared value however, had interactive effect with 'information quality' and 'service quality'. This study is expected to contribute to spread of academic research on smart work system by suggesting a model that can show important factors for corporation while explaining the successful implementation of SWP and its continuous usage.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.163-167
• /
• 2009

Although the domestic electric power consumption of lighting have shared 20${\sim}$30 % of the national electric power consumption, the spread of lighting control system which can reduce the electric power consumption have been insignificant. The government have set the demonstration project and given the incentive to promote the spread of lighting control system since 2008. The M&V (Measurement and Verification) methodology for lighting control system have not been set yet in our country, but the direct measurement was suggested in US. The direct measurement methodology can increase the accuracy of measurement, but it cost much money to burden a customer. This study have suggested a new M&V methodology which cost low and is simple relatively. I had measured the amount of electric consumption through both the direct measurement and the new M&V program computation, and have analyzed the deviation. The amount of electric consumption measured by the new M&V program computation have agreed with one by the direct measurement within the error range of the instrumentation in case of lab scale test, and the 4${\sim}$8 % deviation have existed in case of field evaluation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.10
• /
• pp.837-842
• /
• 2001

In this paper, we design and implement the DC characteristic measurement system for semiconductor devices. The proposed system is composed of 4 SMU(Source and Measure Unit) channels. Various efforts in hardware and software have been made to reduce the measurement errors. Internal and external sources of errors in measurement system especially in pA range measurement have been identified and removed. Also, various digital signal processing techniques are developed. Calibration is executed under the control of microprocessor periodically. Experimental results show that the implemented system can measure the DC characteristic of semiconductor devices with less than 0.2% error in various voltage and current source/measurement range.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.35-40
• /
• 2014

Many researches have been conducted to achieve improvement in distributed system that connects multiple computer systems via communication lines. Among others, the load balancing and file migration are considered to have significant impact on the performance of distributed system. The dynamic file migration algorithm common in distributed processing system involved complex calculations of decision function necessary for file migration and required migration of control messages for the performance of decision function. However, the performance of this decision function puts significant computational strain on computer. As one single network is shared by all computers, more computers connected to network means migration of more control messages from file migration, causing the network to trigger bottleneck in distributed processing system. Therefore, it has become imperative to carry out the research that aims to reduce the number of control messages that will be migrated. In this study, the learning automata was used for file migration which would requires only the file reference-related information to determine whether file migration has been made or determine the time and site of file migration, depending on the file conditions, thus reflecting the status of current system well and eliminating the message transfer and additional calculation overhead for file migration. Moreover, mathematical model for file migration was described in order to verify the proposed model. The results from mathematical model and simulation model suggest that the proposed model is well-suited to the distributed system.

• Journal of the HCI Society of Korea
• /
• v.7 no.1
• /
• pp.11-17
• /
• 2012

A number of context information is shared through social network service(SNS). Among them, we focused on the information which is rarely shared for various reasons. The result indicated that users prefer to avoid certain types of context information because of： 1)containing socially unacceptable content, 2)laking of desire for disclosure, and 3)potential risk of privacy. Concerning privacy concern, it was found that users developed their own management strategy to control context information rather than employing existing system features. Drawing on Communication Privacy Management(CPM) theory, we analyzed findings and suggested guidelines for system design.