• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제13권1호
• /
• pp.31-37
• /
• 2024

기존의 비밀 공유방법들은 무작위적으로 생성된 다항식(polynomial) 또는 평면(plane)으로부터 지분을 유도하기 때문에 복잡하고 긴(complex and long) 형태의 지분을 생성한다. 그렇게 생성된 지분은 암기(not memorizable)가 불가능하고 관리가 어려우며, 이에 따라 지분을 보관하고 관리하기 위해 컴퓨터 시스템 또는 별도의 디지털 장치가 있어야 한다. 전통적인 비밀 공유방법을 변형하면 패스워드나 생체정보와 같이 사용자가 미리 선택한 값을 지분으로 설정하는 것이 가능할 수 있다. 그러나 이러한 방법은 사용자가 선택한 값의 무작위성(randomness) 또는 엔트로피(entropy)가 낮으면 완전 보안성을 보장하지 못할 수 있다. 즉, (t-1) 개 이하의 지분으로 비밀을 유추해내는 것이 가능해질 수 있다. 본 연구에서는 암기가 가능한 패스워드나 지문과 같은 생체정보와 같이 미리 지정된 값을 지분으로 사용하면서 비밀 공유의 보안성을 보장할 수 있는 지분 강화(share hardening) 방법을 제안한다.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.1-8
• /
• 2000

This paper reviews the main drivers forcing change and progress in powertrains for passenger cars in the coming years. The environmental drivers of omissions and CO2 will force better technical performance, but customer demand for increased choice will force change in the basic engine design and provide opportunities for alternate configurations of powertrain. Gasoline engines will embody refinements of valve train actuations as well as developments in combustion, especially direct injection and possibly a lean booated form of direct injection. Nevertheless, the conventional, port injected engine will continue to be the dominant engine for some years to come. The high speed direct injection diesel will very soon supplant its indirect injection predecessor completely. It will take an increasing share of the total powertrain market as improved specific power and refinement make it even more attractive to the customer. Car manufacturers will provide diesel models to satisfy this customer demand as well as using the efficiency of the diesel to enable them to meet their fleet CO2 commitments. Both gasoline and diesel engines will see an increasing degree of electrification and partial hybridisation as efficient flywheel mounted electrical devices become available.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.61-62
• /
• 2006

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the comers of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was $Re=2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios $G/B(G/B=0.1{\sim}1.2)$ between prism and plane wall. The average drag coefficients were increased and the average hit coefficients were decreased and increased with the space ratios foulard plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper comer and the horizontal normal fence at the rear and lower corner on the prism.

• Strategy21
• /
• 통권39호
• /
• pp.163-197
• /
• 2016

The completion of Jeju Naval Base on February 2016 made the Republic of Korea Navy(ROKN) review the size and role of the Maritime Task Flotilla(MTF). The new strategic environment for the 12st century and the new challenges require the Navy to counter North Korea's provocations and prevent potential enemy's threat. The Navy is also required to take part in the variety of international roles and missions commensurated with Korea's global status to maximize the national interest. Despite these changes, Korea's military construction concept is still unable to break away from the old paradigm of the North Korean threat largely centered. In order to develop the current MTF into the Task Group with the construction of Jeju Naval Base, the Navy must newly not only establish new force development plan and fleet management concepts but also go to persuade and convince policy decision makers. To this end, the following efforts should be promoted. First, the ROK Navy steps up efforts in order to share with the Task Group's vision and strategy. The Navy should also provide the size and structure as well as the missions and roles of the Task Group to react to new maritime security environment. Second, the Navy analyse the MTF's ability and what is required and necessary to perform its duty. After that, it must set out the direction of the Task Group's force development. Third, the current missions and roles of the MTF should be re-established to respond various threats. Finally, accommodating of new technology to the MTF should intensify its strengths. The ROK Navy has a mixed force structure consisting of three fixed- base fleets and a MTF. The fixed base fleet has a passive force to defend and protect its own sea areas, but the MTF should actively not only counter North Korea's threats, including ballistic missiles, but also fight potential threats and takes international missions as a primary task force. However, the MTF has a limited capability to accomplish given missions and long-range operations, and thus, the ROK Navy is strongly required to construct the Task Group.

• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.583-588
• /
• 2015

Flexible tactile sensors can provide valuable feedback to intelligent robots regarding the environment around them. This is especially important when robots such as, service robots share a workspace with humans. This paper presents a contact force measurement algorithm of a flexible tactile sensor. This sensor is manufactured by a direct-writing technique, which is one 3D printing method, using multi-walled carbon nano-tubes. An analog signal processing circuit has been designed and implemented to reduce noise contained in the sensor output. In addition, a digital version of the Butterworth filter was implemented by software running on a microcontroller. Through various experiments, characteristics of the sensor system have been identified. Based on three traits, an algorithm to detect the contact and measure the contact force has been developed. The entire system showed a promising prospect to detect the contact over a large and curved area.

• 한국정보과학회논문지:정보통신
• /
• 제30권3호
• /
• pp.437-447
• /
• 2003

현재 인터넷 라우터는 네트워크 트래픽의 지수적인 증가로 인해 발생하는 혼잡 상황을 명시적으로 해결 할 수 없다. 이러한 문제를 해결하기 위해 IETF(Internet Engineering Task Force)에서는 RED(Random Early Detection) 알고리즘과 같은 능동적인 큐 관리(Active Queue Management) 알고리즘을 제시하였다. 하지만 RED 알고리즘은 UDP 플로우와 같이 양 종단간 혼잡제어를 하지 않는 플로우(flow)나 RTT(Round Trip Time)값이 작은 TCP 플로우에 대한 불공정성 문제를 가지고 있으며 이로 인하여 혼잡상황이 악화되는 문제를 가지고 있다. 본 논문에서는 이러한 문제를 해결하기 위해, 새로운 공정성 향상 큐 관리 알고리즘인 AFQM(Approximate Fair Queue Management) 알고리즘을 제안하였다. AFQM 알고리즘은 공정분배율(fair share rate) 이상의 대역폭을 차지하는 플로우를 판별하여 공정성을 보장한다. AFQM 알고리즘은 적은 오버헤드(overhead)와 구현의 용이성을 가지고 있기 때문에 비반응 플로우(unresponsive flow)와 불량 사용자 플로우(misbehaving flow)를 큰 오버헤드 없이 관리하여 플로우간의 공정성을 보장하는 알고리즘 이다.

• 지역연구
• /
• 제9권1호
• /
• pp.3-23
• /
• 1993

In this paper the prevailing geography of the information sector, fousing on its occupatonal dimension, is examined. The purposes of this paper are to analyze the labor force share of information occupation workers at each special city and region, to compare the inter-regional distribution of information workforce and to analyze regional share of information occupations in manufacturing industry. Spatial pattern of size and occupational composition of information sector shows a core-periphery disparity. There is a clear evidence of Seoul's dominance of the information economy, particularly such as scientific and technical, consultative services, management and process control function. Also the distribution of information workers in manufacturing industry over space was polarized than is the case for total manufacturing employment and noninformation workers. Therefore Korean information economy is marked by a highly articulated spatial division of labor within individual industry, which can be attributed to the locational characteristics of information intensive industries and industrial composition of regional economy. From the results of this study, information employment prospects among regions of Korea would reinforce the unequal geography of job opportunity. In this light, regional policy efforts should be given to the improvement of information infrastructure to facilitate new computer-based service products and process in peripheral regions.

• Ocean and Polar Research
• /
• 제23권3호
• /
• pp.265-277
• /
• 2001

This paper aims at overviewing Korean fisheries profile with a view on why Korean fisheries need marine ranching program as a new fisheries paradigm - a community-based co-management approach and drawing some policy implications from the advanced experience in fisheries. The aims of community-based co-management approach as a planned approach can be set out under the planning objectives of efficiency and equity. In this context Tongyeong marine ranching program is an important government-sponsored pilot enterprise. Experiences in the advanced fisheries such as Canadian Snow-Crab case suggest that in order to be successful for marine ranching be successful it is necessary that (i) there should be high-value species, (ii) property right should be established, (iii) there should be the reasonable number of participants involved, (iv) the participants and the government should be able to share resource enhancement/management/utilization responsibilities and associated fisheries management expenses. Among these, management cost sharing based on the practical partnership between fishing communities and government is of particular importance because the government must have a full responsibility for all ranching program expenditure unless revenues sufficient to guarantee reasonable income and to share management cost are generated from the ranching business.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.613-617
• /
• 2006

개별 하천에 존재하는 하상재료는 상류의 지질특성과 유수에 의한 작용력의 특성을 반영하고 있으며 유수에 의한 작용력은 하상경사와 유량규모에 지배적인 영향을 받는다. 산본 황일(山本 晃一)(1994)에 의하면 자연하천에서 동일한 경사를 가지는 하도 구간은 하상재료, 소류력, 저수로 폭, 수심 등이 대체로 동일한 값을 나타내고 있으며, 하도 특성을 지배하는 주요인자로 각 하천의 평균연최대유량, 하상재료의 대표입경, 하상경사 등을 설정하고 있다. 하상재료는 하도의 물리적, 생태적 특성을 지배하는 대표적인 인자로 의미가 있으나 국내에서는 이와 관련된 연구가 미비한 실정이다. 본 연구에서는 국내 하천의 하도 특성을 분석하는 기초연구로서 대표하천에 대한 하상재료를 채취하여 분석하였으며 이를 분급도와 하상경사와의 관계로 도시하여 하상재료 분포 특성을 분석하였으며 이를 일본 하천의 하상재료 특성과 비교하였다. 분석결과에 의하면 분급도, 무차원 소류력, 하상경사와의 관계 분석을 통해서 자갈과 모래하천은 그 특성이 뚜렷이 구분됨을 확인할 수 있었으며, 하상경사와 대표입경의 관계도 모래와 자갈을 구분하여 접근하여야 함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.