• Economic and Environmental Geology
• /
• v.17 no.2
• /
• pp.115-139
• /
• 1984

The Cu-Pb-Zn-Ag hydrothermal vein-type deposits which comprise the Sambong mine occur within calc-alkaline volcanics of the Cretaceous Gyeongsang Basin. The ore mineralization took place through three distinct stages of quartz (I and II stages) and calcite veins (III stage) which fill the pre-existing fault breccia zones. These stages were separated in time by tectonic fracturing and brecciation events. The reflection variations of one mineral depending on mineralization sequence are considered to be resulted from variation in its chemical composition due to different physico-chemical conditions in the hydrothermal system. The reflection power of sphalerite increases with the content of Fe substituted for Zn. Reflectances of the sphalerite grain are lower on (111) than on (100) surface. The spectral profiles depend on the internal reflection color. Sphalerite, showing green, yellow and reddish brown internal reflection, have the highest reflection power at $544m{\mu}$ (green), $593m{\mu}$ (yellow) and $615m{\mu}$ (red) wavelength, respectively. Chalcopyrite is recognized as biaxial negative from the reflectivity data of randomly oriented grains measured at the most sensitivity at $544m{\mu}$. The microindentation hardness against the Fe content (wt. %) for the sphalerite increases to 8.05% Fe and then decreases toward 9.5% Fe content. Vickers hardness of the sphalerite is considerably higher on surface of (100) than on (111). The relationship between Vickers hardness and crystal orientation of the galena was determined to be $VHN_{(111)}$ > $VHN_{(210)}$ > $VHN_{(100)}$. The softer sulfides have the wider variation of the diagonal length in the indentation. Diagonal length in the indentation is pyrite

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.343-355
• /
• 1985

Spectral reflectivity and microhardness were measured quantitatively on polished surfaces of a selection of bireflecting minerals obtained from several well known metallic deposits. Incremental errors are much higher than decremental errors and errors were found to be lowest in the spectral region close to the green wavelength ($544m{\mu}$). The characteristics of the spectral profile are significant in their control of white light color. The covellite and graphite have reflectivity profiles similar in shape for each principal direction, showing noticeable difference in magnitude between the profiles: The spectral reflectivity of covellite parallel to the extraordinary vibration is higher (R$$\simeq_-$$10%) than that parallel to the ordinary vibration and graphite shows opposite feature. Reflectivity of the enargite and famatinite cut parallel to the cleavage plane is always higher (R$$\simeq_-$$5%) than that of the section cut normal. The optical symmetry of 5 bireflecting minerals was determined by noting the variation in reflectivity at $544m{\mu}$. The data indicate that covellite is optically uniaxial positive and graphite is optically uniaxial negative. The Rm values for enargite and famatinite are clearly closer to the minimum value for the mineral ($R_1$) than to the maximum value ($R_2$) : the minerals can be recognized as optically biaxial positive. Enargite and famatinite cut parallel to cleavage have much higher hardness values (HV=> $200kg/mm^2$) than those cut normal to cleavage. Vickers indentations exhibit characteristic features for all the bireflecting mineral species studied. Broad radicle groupings of the mineral species can be made with regard to the reflectivity microhardness numbers.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.1-14
• /
• 2017

The analytical conditions including surface state, moisture effect, and device condition were investigated for applying Short Wave Infrared(SWIR) spectroscopy to the field survey. Among the three surface state of samples (exposed surface, cutting face and powder), both spectra from the exposed surface and cutting face are almost identical whereas spectral variation was detected in powder sample. Over 24-hours-dryring of the wet sample at room temperature, the samples show a similar spectrum with that of dry condition. The result suggests that outcrop samples mighty be dried for 24 ~ 48 hours depending on the wetness of outcrop. The bright minerals could produce stable spectra with 10 times measurements as default value of the device under SWIR spectroscopy but the dark minerals would require about 10 seconds, which corresponds to 100 times measurements to get the reliable spectra. The position and shape 2,160 ~ 2,330 nm and/or other spectral features of hydrothermal alteration minerals by SWIR spectroscopy could be used for a classification of hydrothermal alteration zone in the field. Absorption peaks in 2,160 ~ 2180 nm are useful for identifying (advanced) argillic zone by spectral characteristics of kaoline, dickite, pyrophyllite, and alunite. Absorption peaks in 2,180 ~ 2,230 nm are able to define muscovite, sericite, and smectite, which are key alteration minerals in phyllic zone. Absorption peaks in 2,230 ~ 2,270 nm can be used to recognize prophylitic zone where chlorite and epidote occur. Absorption peaks of other principle minerals such as talc, serpentine, amphibole, and carbonate group are mainly detected within the wave length of 2,270 ~ 2,330 nm. This result indicates that the spectra of these minerals need to be carefully interpreted.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.347-362
• /
• 2020

Iron (hydro)oxides in aqueous environments are primarily formed due to mining activities, and they are known to be typical colloidal particles disturbing surrounding environments. Among them, hematites are widespread in surface environments, and their behavior is controlled by diverse factors in aqueous environments. This study was conducted to elucidate the effect of environmental factors, such as ionic composition and strength, pH, and natural organic matter (NOM) on the behavior of colloidal hematite particles. In particular, two analytical methods, such as dynamic light scattering (DLS) and single-particle ICP-MS (spICP-MS), were compared to quantify and characterize the behavior of colloidal hematites. According to the variation of ionic composition and strength, the aggregation/dispersion characteristics of the hematite particles were affected as a result of the change in the thickness of the diffuse double layer as well as the total force of electrostatic repulsion and van der Walls attraction. Besides, the more dispersed the particles were, the farther away the aqueous pH was from their point of zero charge (PZC). The results indicate that the electrostatic and steric (structural) stabilization of the particles was enhanced by the functional groups of the natural organic matter, such as carboxyl and phenolic, as the NOM coated the surface of colloidal hematite particles in aqueous environments. Furthermore, such coating effects seemed to increase with decreasing molar mass of NOM. On the contrary, these stabilization (dispersion) effects of NOM were much more diminished by divalent cations such as Ca²⁺ than monovalent ones (Na⁺), and it could be attributed to the fact that the former acted as bridges much more strongly between the NOM-coated hematite particles than the latter because of the relatively larger ionic potential of the former. Consequently, it was quantitatively confirmed that the behavior of colloidal hematites in aqueous environments was significantly affected by diverse factors, such as ionic composition and strength, pH, and NOM. Among them, the NOM seemed to be the primary and dominant one controlling the behavior of hematite colloids. Meanwhile, the results of the comparative study on DLS and spICPMS suggest that the analyses combining both methods are likely to improve the effectiveness on the quantitative characterization of colloidal behavior in aqueous environments because they showed different strengths: the main advantage of the DLS method is the speed and ease of the operation, while the outstanding merit of the spICP-MS are to consider the shape of particles and the type of aggregation.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.404-417
• /
• 2017

In this study, we analyzed response patterns of rotifer community to eutrophic state, and estimated the applicability of rotifer community as an environmental indicator for highly eutrophicated reservoirs. In order to evaluate the relationships among spatial and temporal distributions and the water quality of rotifer community, we selected the Jundae Reservoir and Chodae Reservoir in Chungcheongnam-do, Korea, which are geographically adjacent but have different water quality, particularly in their eutrophic states. For the analyses on their correlations, monthly survey of water quality and rotifer community, was conducted from April to November 2013 in both reservoirs. The rotifer community was divided into different compositions of functional groups as well as species. Functional groups were classified according to the structure and shape of trophi which can represent feeding behavior of rotifer genus. To reflect ecological characteristics of species, body size and habitat preferences were also considered. Species-based composition did not show a consistent tendency with water quality parameters related with eutrophication. On the contrary, functional group composition showed relatively clear group-specific patterns, increasing or decreasing according to the parameters. The results suggest the possible application of rotifer functional group composition as an indicatorforthe lentic systems, especially hyper-eutrophicated reservoirs. The present study can suggest the applicability based on the field observations from the limited time scale and sites, and further studies on feeding behavior of the rotifer functional group and its interactions with environmental variables are necessary for the further application.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.959-965
• /
• 2016

In 1994, a new cultivar 'Joyskin' was created from a cross between the cultivars 'Whangkeumbae' and 'Waseaka' at the Pear Research Institute of the National Institute of Horticultural and Herbal Science, Rural Development Administration. In 2006, the 'Joyskin' was selected from among the 317 seedlings resulting from the cross for its skin and taste qualities. Regional adaptation tests were conducted in nine regions and in ten experimental plots from 2006 to 2011. The cultivar was named in 2011. 'Joyskin' showed a vigorous growth habit and semi-spread characteristics similar to 'Whangkeumbae'. The average full bloom date for 'Joyskin' was April 21st, which was also similar to 'Whangkeumbae'. The optimum fruit ripening time was September 6-8th, which was six or eight days earlier than 'Whangkeumbae'. The fruit was round in shape and the skin was a golden yellow color at maturity. The average fruit weight was 320 g and the flesh firmness was $2.5kg/8mm{\varphi}$. The firmness of the fruit skin determined by a blade-type plunger of texture analyzer was 22.9 N, which was significantly different from that of 'Whangkeumbae' 29.9N. Stone cell analysis of 'Joyskin' by phloroglucinol-HCl, showed that 'Joyskin' stone cells were small in size and few in numbers cpmpared to those of cultivars of was 'Manpungbae', 'Niitaka', and 'Whangkeumbae'. The patent application for 'Joyskin' was submitted in April, 2012 (Grant No. 2012-337). In 2016, 'Joyskin' (Grant No. 5895) was registered as a separate record, with uniformity and stability per Korean Seed Industry Law.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2011

We investigated developmental stages of embryo and early life history of the Korean indigenous fish, the northern loach, Cobitis pacifica in 2009 in order to understand fundamental knowledges for conservation of this species. Eggs were obtained after hormones injections (LHRH-a, HCG) and were artificially fertilized by the dry method. The embryo was spherical, separative demersal, faint white, and averaged $1.09{\pm}0.04\;mm$ (n=20) in diameter. The hatching of the embryo took place in about 48 hours after fertilization under water temperature of $21.0{\sim}24.0^{\circ}C$ and the newly hatched larvae averaged $2.87{\pm}0.05\;mm$ (n=20) in total length (TL). Four days after hatching, the larvae grew up to $6.86{\pm}0.10\;mm$ (n=10) in TL and york sac absorption, mouth and anus opening were shown. Fourteen days after hatching, most of fin-rays appeared at $10.71{\pm}0.34\;mm$ (n=10) in TL and color spots on the body surface were attained. Twenty six days after hatching, the larvae grew up to $14.88{\pm}0.45\;mm$ (n=10) in TL, and all their fin-rays were formed. Therefore, according to current study regarding the morphological development of Cobitis pacidica, the conversion from larval to juvenile stages occurred at 26 days after hatching. Eighty days after hatching, the larvae were $33.3{\pm}1.25\;mm$ (n=10), and their body shape and color pattern were similar to adult fish. In this study, embryonic development and early life history of the northern loach, Cobitis pacifica show morphological characteristics of Cobitidae family. We expected that our results can be used as an fundamental knowledges for restoration study of indigenous fish species.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.214-223
• /
• 2017

A total of 15 different corn hybrids, Kwangpyeongok, Gangdaok, Yanganok, Singwangok, Jangdaok, Cheonganok, Cheongdaok, Andaok, Dapyeongok, Pyeongkangok, Pyeonganok, Daanok, Sunwon 184, Gangilok, and P3394 was used to investigate the growth and yield depending on the sowing date. The sowing dates were April 5, June 25, and July 5 and each experiments was performed in triplicste. The growth of Gangdaok was the highest. However, although the growth of Kwangpyeongok, was lower thanthar of Gangdaok, its stem height to ear height ratio was lower than that of Gangdaok, thus, Kwangpyeongok may be more suitable for stable cultivation. Both growth and yield of Daanok were low, regardless of planting date, but yield and ear shape of Pyeongkangok and Dapyeongok were for fresh corn. Growth and yield of the 15 different corn hybrids varied depending on the planting date, However, the growth degree days (GDD) was the most important factor governing the maturity of corn. More than $1500^{\circ}C$ of GDD was sufficient to harvest mature corn hybrids in the central region of Korea. Besides yield and growth, other characteristics, such as sweetness and taste of the hybrids, should be investigated further the selection of the best corn hybrid.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The comprehensive evaluation for rock cleavages was performed through the combination of the 16 parameters derived from the enlarged photomicrographs of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the above parameters can be classified into group I (spacing frequency (N), total spacing ($1m{\geq}$), constant (a), exponent (${\lambda}$), slope of exponential straight line (${\theta}$), length of line (oa') and trigonometric ratios ($sin{\theta}$, $tan{\theta}$) and group II (mean spacing (Sm), difference value between mean spacing and median spacing (Sm-Sme), density (${\rho}$), lengths of lines (oa and aa'), area of a right-angled triangle (${\Delta}oaa^{\prime}$) and trigonometric ratio($cos{\theta}$). The values of the 8 parameters belonging to group I show an order of H(hardway, H1+H2)