• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.626-632
• /
• 2016

In this paper, we propose the defect emphasis in TFT-LCD panel image. The defect emphasis image consist of S(Shape) map and B(Brightness) map. S map based on DoG(difference of gaussian) is made with the mura defect shape characteristic. And B map use defect intensity property that defect intensity is higher than background. The experiments were conducted to evaluate the performance of the proposed defect emphasis method. The results of experiments show the validity of the defect emphasis using the proposed method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.983-988
• /
• 2000

The leadframe of thin plate fabricated by stamping method generates a lot of burr and stress in the processing surface because of the mold. The electropolishing equipment was produced in order to increase accuracy and surface roughness for 42%Ni-Fe leadframe. An electrolyte consisted of phosphoric acid, ethylene glycol and deionized water. Experiments were accomplished as polishing conditions were changed such as current density, polishing time, electrode gap and sample shape. The burr from the cutting was eliminated and surface characteristics of high flatness and high luster wre obtained after electropolishing. In addition, the electroplishing had good characteristic in 1.0 A current density and 4㎜ of electrode spaces, and it was affected by the composition of electrolyte and the sample shape.

• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.55-59
• /
• 1978

The photographic characteristics have been studied in relation with various molecular weights of Polyvinylpyrrolidone(PVP). The shape of silver halogen crystals by physical ripening of mixture of photographic gelatine and various molecular weights of PVP were observed. Then, the photographic characteristics have been studied by chemical ripening. Results were concluded as follows: 1. All of the crystals have formed in the shape of (100) or (111). 2. Photographic characteristics were inferior by using PVP of higher molecular weight. 3. Photographic characteristics were superior by using PVP of lower molecular weight. 4. Photographic characteristic were compared with various Emulsion thickness and Tested Resolving power.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.25-32
• /
• 1997

The neural network was applied to identify wear debris generated from the lubricated machine moving surface. The wear test was carried out under different experimental conditions. In order to describe characteristics of debris of various shapes and sizes. The four parameter(50% volumetric diameter, aspect, roundness and reflec- tivity) of wear debris are used as inputs to the network and learned the friction condition of five values (material 3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameter learned. The three kinds of the wear debris had a different pattern characteristic and recognized the friction condition and materials very well by neural network.

• Tribology and Lubricants
• /
• v.25 no.2
• /
• pp.114-119
• /
• 2009

Fretting occurs wherever short amplitude reciprocating sliding between contacting surfaces is sustained for a large number of cycles. The fundamental characteristic of fretting is the very small amplitude of sliding and combination of different wear mechanism. Predicting wear is important to enhance reliability of the parts. The objective of this paper is to predict fretting wear by using a contact analysis considering wear process. This construction will give us important information to know a property of fretting wear.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2054-2057
• /
• 2005

In this paper, the application of finite element method to design the shape of load cell as an illustrative case study is described. The relationship between the various shapes of load cell and their stress characteristic were analyzed by COSMOS simulation program. The results obtained from the proposed analysis can be applied to determine the appropriate position of strain gauges for good quality load cell. The experimental results show the good efficiency of the proposed technique.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.304-308
• /
• 2007

This paper deals with ANN(Artificial Neural Networks) and its application to automatic ship berthing. Due to the characteristic of ship's manoeuvre comparing with other moving objects on land, it has been known that the automatic control for ship's berthing cannot cope with various berthing situations such as various port shape and approaching directions. for these reasons. the study on automatic berthing using ANN usually have been carried out based on one port shape and predetermined approaching direction. In this paper, new algorithm with ANN controller was suggested to cope with these problems. Under newly suggested algorithm, the controller can select appropriate weights on the link of neural networks according to various situations. so the ship can maintain stable berthing operation even in different situations. Numerical simulations are carried out with this control system to find its improvement.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.260-267
• /
• 1999

In this paper, We propose the initial shape finding and dynamic analysis of cable dome structure are presented. Cable dome that is consist of three component such as cable, strut and fabric membrane have complex structural characteristics. Main structural system of cable dome is cable-strut tensegric system, and fabric membrane element Is conceived as cladding roof material. One of the important problem of cable dome is shape finding of those subjected to cable and membrane forces, which stabilize the structures. And the other is structural response from external load effect such as snow and wind When cable dome are subjected to dynamic load such as wind load each structural component has many important problem because of their special structural characteristics. One problem is that geometrical nonlinearity should be considered in the dynamic analysis because large deformation is occurred from their flexible characteristic. The other problem is that wrinkling occurs occasionally because cable and membrane elements can not transmit compressive forces. So this paper describe the physical structural response of cable dome structure.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.44-50
• /
• 2004

Spinel structured lithium managanese oxide $(LiMn_2O_4)$ powder with well defined facetted morphology was prepared by precipitation-evaporation method. {111}, {110}, and {100} planes are mainly observed in the $LiMn_2O_4$ powder. And powder shape of tetradecahedron and octahedron was observed depending on the calcinations temperature. The observed powder morphology observed seemed to be related to the nonstoichiometry of the oxygen in the $LiMn_2O_4$ spinel structure. Oxygen nonstoichiometry might be responsible for the Jahn-teller effect and structure transition which in turn affects the surface energy of the {111}, {110}, and {100} planes. Powder shape transition from tetradecahedron to octahedron seemed to be related to the surface energy of the {111}, {110}, and {100} planes with oxygen nonstoichiometry.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.291-294
• /
• 2002

This study describes the external spray characteristics of deflector nozzle such as the breakup procedures of liquid sheet, spray angle, discharge coefficient and bubble behaviors of spray and SMD at deflector nozzle. In order to visualize the spray behaviors shadow graphy technique were used. According to the increase of injection pressure, development of the spray passes through the dribbling, distoted jet, closed bubble due to the contraction by surface tension forces, the bubble opens into hollow tulip shape, and the curved surface straightened to form a conical sheet like as the simplex swirl atomizer. Spray cone angle was nearly 90 deg. Variations of SMD were examined in order to describe the dependency of SMD on the injection pressure and orifice diameter. The shape of deflector and oriffice diameter had an effect on the discharge coefficient.