• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1032-1042
• /
• 1998

The purpose of this study is to measure, compare, and investigate the physical properties of rayon/cotton blend fabrics treated with cellulase and cellulase & specific degeneration silicon and to present basic data which is in development a value-added fabric. The results are as follows. The condition for the treatment of cellulase was at 55$^{\circ}C$, pH 4 and the weight loss increased as the concentration of cellulase and the treated time increased. On treatment with cellulase, the crossectional view & longitudinal view of fiber noticed remarkable crack as weight loss increased and tensile strength and elongation decreased, and pilling was enhanced remarkably. KOSHI was increased, NUMERI and FUKURAMI were decreased as weight loss increased. In the basic characteristic value of clothing wearning, shape stability and drapability were decreased, but air content was improved. On treatment with cellulase & silicon, the degree of damage in the crossectional view & longitudinal view of the fiber reduced. Tensile strength, elongation, moisture regain improved. KOSHI and FUKURAMI were reduced, NUMERI was improved rather than when it was treated with cellulase. Therefore handle was improved. In the basic characteristic value of the clothing wearing, shape stability, air content, drapability were improved.

• Journal of Environmental Science International
• /
• v.25 no.9
• /
• pp.1289-1297
• /
• 2016

The walls of guard cells have many specialized features. Guard cells are present in the leaves of bryophytes, ferns, and almost all vascular plants. However, they exhibit considerable morphological diversities. There are two types of guard cells: the first type is found in a few monocots, such as palms and corn, and the other is found in most dicots, many monocots, mosses, ferns, and gymnosperms. In corns, guard cells have a characteristic dumbbell shape with bulbous ends. Most dicot and monocot species have kidney-shaped guard cells that have an elliptical contour with a pore at its center. Although subsidiary cells are common in species with kidney-shaped stomata, they are almost always absent in most of the other plants. In this study, there were many different stomatal features that were associated with kidney-shaped guard cells, but not dumbbell shaped guard cells, which are present in most grasses, such as cereals. Each plant investigated exhibited different characteristic features and most of these plants had kidney-shaped guard cells. However, the guard cells of Chamaesyce supina Mold, were often more rectangular than kidney-shaped. In contrast, Sedum sarmentosum guard cells were of the sink ensiform type and in Trifolium repens, the guard cells exhibited a more rhombic shape. Therefore, kidney-shaped guard cells could be divided into a number of subtypes that need to be investigated further.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.3
• /
• pp.314-319
• /
• 2015

Invar is a compound metal of Fe-Ni system contained 36.5% Ni. The characteristic of invar is that the coefficient of thermal expansion is $1.0{\times}10^{-6}cm/^{\circ}C$. It is approximately 10 times smaller than series of steel. Because of this low thermal expansion characteristic of Invar, it is used to shadow mask of display device such as UHDTV or OLED TV. In this study, pulse current from pulse generator instead of DC current is used to overcome the disadvantages of the conventional electrochemical machining. Pulsed current with different duty factor in PECM affect the precise geometry. Pulse electrochemical machining is conducted to machine the micro hole to the invar sheet with different duty factor. The machined shape and overcut of invar sheet with different duty factor is observed by optical microscope and scanning electron microscope (SEM).

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.183-187
• /
• 2011

The polymer-stabilized blue phase liquid crystal (BPLC) cell has advantages such as sub-millisecond response time, wide viewing angle and no rubbing process for the alignment of liquid crystals. However, high operating voltage and low kerr constant of the polymer-stabilized blue phase liquid crystal deteriorate the electro-optical characteristic of the polymer-stabilized BPLC cell. In this paper, we proposed novel zig-zag electrode in cell layout and confirmed that proposed electrode shape could reduce an over 25 percent of operating voltage for BPLC cell without degradation of tranmittance by using Kerr constant simulation.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.467-471
• /
• 2004

The development of a tilting train with construction of electric line on the conventional railway is required for speed-up on the conventional railway with many curving sections. For development of tilting train, the study and development of the tilting system and tilting bogie having the different mechanism with a general high speed train will play a main role for improving the technology in the field of Korean railway. The study and development of the pantograph tilting mechanism in order to keep a good contact behavior between a pantograph and a contact wire by tilting a pantograph on the opposite direction of the vehicle tilting direction. In this study, we analyzed the aerodynamic characteristic of a developing pantograph on the tilting train and obtained the contact force with catenary by aerodynamic lift force by the aerodynamic analysis. We also performed the numerical analysis for design the device controlling lift force on a pantograph. From the aerodynamic simulation and parameter study for a device to control the lift force, we will suggest the various shape and the optimal shape of it corresponding to a developing tilting pantograph. The Fluent software is used for the calculation of flow profile in this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.14-22
• /
• 2007

A reversed trapezoidal fin with variable lateral surface slope is optimized using a two-dimensional analytic method. For a fin base boundary condition, convection from the inside fluid to the inside wall and conduction from the inside wall to the fin base are considered. Heat loss from the fin tip surface is not ignored. The maximum heat loss at the practical fin length, the corresponding optimum fin efficiency, fin length and fin base height are presented as a function of the fin inside and outside convection characteristic numbers. One of the results shows that the optimum fin shape becomes 'fatter and shorter' as the ratio of fin tip height to base height increases.

• The Journal of Korean Medicine
• /
• v.34 no.3
• /
• pp.1-12
• /
• 2013

Objectives: This was study about identifying fine seed herbs that are highly mixed together: Celosiae Semen, Celoisae Cristatae Semen, Cuscutae Semen, Perillae Semen. Methods: In non-distinctive herbs through sensory test, we can find accurate discriminative points by using a stereoscope. As a result, a new discriminative key was completed. Results: We identified a comparison of herbs which are mixed up in distribution. 1) In the case of Celosiae Semen and Celoisae Cristatae Semen, Celoisae Cristatae Semen which is mixed up is bigger and more glossy and especially have the sunk umbilicus. 2) In the case of Cuscutae Semen and Perillae Semen, Perillae Semen is discriminated by characteristic morado netting surface and impression of fruit stalk in the single-ended. 3) In the case of Cuscutae Semen which is distributed in three species, we discriminated by beak shape, location of umbilicus and vomiting thread shape or not when put in water. (1) Cuscuta chinensis has a weak beaky shape, an umbilicus in center and is vomiting thread shape when put in water. (2) C. australis has very weak beaky shape, an umbilicus beneath and is vomiting thread shape when put in water. (3) C. japonica has clear beaky shape, an umbilicus beneath and is not vomiting thread shape when put in water. Conclusions: A stereoscope can be effectively used for identifying fine seed herbs hardly distinguishable by sensory tests.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.115-126
• /
• 2019

The purpose of this study is to analyze the characteristics of older women's torso shapes. The data was collected from the 7th Size Korea, which featured 453 women between the ages of 70-85. A factor analysis was performed of 31 indices, including seventeen based on height and length measurements, eight based on circumference measurements, and six based on torso flattening. The torso shape was determined from seven factors: torso flatness ratio, shape of the side upper torso, vertical size of upper torso, silhouette of the torso, silhouette of the bust and abdomen, shape of the hip, and the vertical size of the back of upper torso. The torso shapes of older women were classified into three types based on the results of the factor analysis. Type 1 is called the large rectangle type. They have the lowest degree of forward bend in the torso, the largest vertical and horizontal size, a round body shape, and the upper torso is gently curved. Type 2 is called the inverted triangle type. They also have a round body shape, but the abdominal size is relatively small compared to the size of the bust, and also have an open and drooping bust, and the biggest degree of forward bend in the torso. Type 3 is called the square type. They are characterized by drooping hips, the smallest vertical and horizontal sizes, and the gentlest curve of the torso.