• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.105-116
• /
• 2010

The estimation of surface settlement, ground behavior and tunnel displacement are the main factors in urban tunnel design with shallow depth and unconsolidated soil. On deformation analysis of shallow tunnel, it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigated the effects of key design parameter affecting deformation behavior by numerical analysis using nonlinear model incorporating the reduction of shear stiffness and strength parameters with the increment of the maximum shear strain after the initiation of plastic yielding. Numerical parametric studies are carried out to consider the reduction of shear stiffness and strength parameters, horizontal stress ratio, cohesion and shotcrete thickness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.199-209
• /
• 2010

A finite element model for analyzing surface water flow was developed. Shallow water equation was discretized and solved by Galerkin and Newton-Raphson method. Triangular or rectangular elements can be mixed together to construct meshes. The algebraic equation was solved by frontal method which is very efficient in finite element problem. The developed model was applied to rectangular meandering channel with two bends and transverse velocities and water depth distributions were examined. High velocity was located near the inner bank at the apexes of the bends and velocity distribution was symmetrical about the centerline at the midsection of two bend and super elevation also occurred. Simulation results showed very good agreement with measured data. Another numerical simulation was carried out in mild, steep, adverse and abrupt bottom change slope and channels with weir. 12 water surface profiles of gradually varied flow were correct in terms of hydraulic interpretation.

• Journal of the Korean earth science society
• /
• v.45 no.4
• /
• pp.363-376
• /
• 2024

Alluvial beds are intimately associated with electrical properties related to soil types, including clay mineral content, porosity, and water content. The hydraulic property governs water movement and storage in alluvial beds. This study revealed electrical resistivity and hydraulic properties in space and time in relation to the hydrogeological data, groundwater pumping, and rainfall infiltration into the alluvial bed located in Daesan-myeon, Changwon City. An electrical resistivity survey with electrode spacings of 2 and 4m using a dipole-dipole array indicates that electrical resistivity changes in the alluvial bed depend on groundwater pumping and rainfall events. Additionally, rainfall infiltration varies with hydraulic conductivity in the shallow zone of the alluvial bed. The 2 m electrode spacing survey confirms that electrical resistivity values decrease at shallow depths, corresponding with rainfall and increased water content in the soil, indicating rainfall infiltration approximately 1-2 m below the land surface. The 4m electrode spacing survey reveals that hydraulic conductivity (K) values and electrical resistivity (ρ) values display an inverse relationship from the surface to the water table (approximately 9 m) and at deeper levels than the water table. Notably, ρ values are impacted by pumping around the depth of the water table at 9 m. This study suggests that time-lapsed electrical resistivity surveys in space and time could be effective tools for detecting the impact of rainfall and pumping, as well as hydraulic conductivity in shallow alluvial beds.

• Computers and Concrete
• /
• v.34 no.2
• /
• pp.151-168
• /
• 2024

This research aimed to appraise the effectiveness of four optimization approaches - cuckoo optimization algorithm (COA), multi-verse optimization (MVO), particle swarm optimization (PSO), and teaching-learning-based optimization (TLBO) - that were enhanced with an artificial neural network (ANN) in predicting the bearing capacity of shallow foundations located on cohesionless soils. The study utilized a database of 97 laboratory experiments, with 68 experiments for training data sets and 29 for testing data sets. The ANN algorithms were optimized by adjusting various variables, such as population size and number of neurons in each hidden layer, through trial-and-error techniques. Input parameters used for analysis included width, depth, geometry, unit weight, and angle of shearing resistance. After performing sensitivity analysis, it was determined that the optimized architecture for the ANN structure was 5×5×1. The study found that all four models demonstrated exceptional prediction performance: COA-MLP, MVO-MLP, PSO-MLP, and TLBO-MLP. It is worth noting that the MVO-MLP model exhibited superior accuracy in generating network outputs for predicting measured values compared to the other models. The training data sets showed R² and RMSE values of (0.07184 and 0.9819), (0.04536 and 0.9928), (0.09194 and 0.9702), and (0.04714 and 0.9923) for COA-MLP, MVO-MLP, PSO-MLP, and TLBO-MLP methods respectively. Similarly, the testing data sets produced R² and RMSE values of (0.08126 and 0.07218), (0.07218 and 0.9814), (0.10827 and 0.95764), and (0.09886 and 0.96481) for COA-MLP, MVO-MLP, PSO-MLP, and TLBO-MLP methods respectively.

• Korean Journal of Ichthyology
• /
• v.28 no.1
• /
• pp.35-40
• /
• 2016

The microhabitat of Iksookimia hugowolfeldi was surveyed in two sites, Geogeum Island and Jangheung. I. hugowolfeldi in Geogeum Island inhabits mainly pool. This water system consists of sand and cobble and has a shallow water (0.1~0.8 m depth) with slow currents (0.1 m/s). 0+ years old inhabits pool consist of sand and lives in a less than 0.3 m depth. I. hugowolfeldi in Jangheung population inhabits mainly pool consists of sand and cobble and lives in a shallow water (0.1~0.8 m depth) with slow currents (0.1 m/s) compared to the stream of Geogeum Island. With some different fish species, sympatric species collected at Geogeum Island and Jangheung population are 7 species in 4 family identically in the two sites.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1632-1642
• /
• 1992

When a blind hole of small diameter is drilled in the field of residual stress, strain relieved around the hole is function of magnitude of stress, patterns of stress distribution and hole geometry of diameter and depth. Relieved strain coefficients can be calculated from FEM analysis of relieved strain and actual stress. These relieved strain coefficients make it possible to measure residual stress which vary along the depth in the subsurface of stressed material. In this study, the calibration tests of residual stress measurement are carried out by drilling a hole incrementally on the cantilever or on the tensile test bar. Residual stresses can be determined from measured strains around a shallow hole by application of power series method. For the sake of reliable measurement of residual stress, much efforts should be done to measure relieved strains and hole depth more accurately comparing with conventional procedures of gage subject to the external load. Otherwise linear equations converting strains into stresses may yield erratic residual stresses because of ill-conditions of linear equations. With accurate measurements of relieved strains, residual stress even if varying along the depth can be measured. It is also possible to measure residual stress in the thin film of material by drilling a shallow hole.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.45-49
• /
• 2006

The objective of this study is to offer a basic information to select the plant species for environmentally friendly forest road by quantifying the pull-out strength by 18 species used for a revegetation of forest road slope. In the investigation of the root depth growth during 17 months, Indigobush amorpha showed maximum depth of 34.0 cm and perennial ryegrass showed minimum depth of 17.7 cm among all species. The pull-out strength by herb species was $0.054ton/m^2/plant$ for exotic species, $0.085ton/m^2/plant$ for indigenous species, and by shrub species was $0.049ton/m^2/plant$. There were no large difference among herb species in pull-out strength, but shrub species were approximately 9 times stronger than herb species. Thus, for maximizing tightening effect and use of inner soil space. The mixed seeding using herb for erosion control and shrub for shallow failure protection would make up optimal revegetation of forest road slope.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.372-385
• /
• 2016

This present study investigated characteristics of distribution and community structure of macrobenthic invertebrates through the survey of commercial Danish seine fisheries from 2011 to 2013. In this study, a total of 28 species were sampled with a mean density of $32,568ind./km^2$ and mean biomass of $1,649.5kg/km^2$. The dominant species, comprising over 1.0% of the total number of individuals, were Chionoecetes opilio ($11,203ind./km^2$, 34.4%), Pandalus eous ($9,247ind./km^2$, 28.4%), Ophiuridae spp. ($5,750ind./km^2$, 17.7%), Argis lar ($2,631ind./km^2$, 8.1%), Neocrangon communis ($994ind./km^2$, 3.1%), Berryteuthis magister ($612ind./km^2$, 1.9%), Sepiola birostrata ($499ind./km^2$, 1.5%) and Strongylocentrotidae sp. ($424ind./km^2$, 1.3%). The dominant species, in terms of biomass, comprising over 1.0% of the total biomass, were C. opilio ($1,167.2kg/km^2$, 70.8%), B. magister ($130.3kg/km^2$, 7.9%), P. eous ($102.4kg/km^2$, 6.2%), Ophiuridae spp. ($84.6kg/km^2$, 5.1%), Enteroctopus dofleini ($45.5kg/km^2$, 2.8%), A. lar ($35.7kg/km^2$, 2.2%), Strongylocentrotidae sp. ($25.0kg/km^2$, 1.5%) and S. birostrata ($22.1kg/km^2$, 1.3%). Among them, S. birostrata, E. dofleini, Strongylocentrotidae sp. and Ophiuridae spp. were higher abundance and biomass in the shallow water (<200 meters in depth), whereas C. opilio, P. eous, A. lar, N. communis and B. magister were higher in the deep water (301 ~ 500 meters in depth). As the results of cluster analysis and non-metric multidimensional scaling (nMDS) analysis based on the Bray-Curtis similarity of fourth root transformed data for number of species and individuals, the macrobenthic invertebrates community by Danish seine survey was divided into two groups of station in the shallow water (<200 meters in depth, Group A) and the deep water (201 ~ 500 meters in depth, Group B). The major individual-dominant species was S. birostrata, Ophiuridae spp. and immature C. opilio in group A. But Group B was P. eous, A. lar, B. magister and mature C. opilio.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.198-208
• /
• 2011

When a structure which has relatively low load constructs on soft clay, the bearing capacity of the ground will be improved by sand overlying clay. In this condition, verifying the bearing capacity is difficult from the P.B.T etcetera in the in-situ. So, it is needed to estimate precise bearing capacity in the design process. In this study, 2-dimensional chamber tests and FEM analyses are conducted to evaluate behavior of bearing capacity for shallow foundations on a sand overlying clay. Because depth ratio H/B and bearing capacity ratio $q_c/q_s$ are selected as main factors, height of a sand, undrained shear strength of a clay and width of a loading are designated as variables. Results from chamber tests are very similar with those of FEM analyses. And it shows that punching shear mechanism is more suitable than the equation of Okamura et al.(1998). To make continual application of load spread mechanism, the equivalent load spread angle is proposed for H/B and $q_c/q_s$. Also, the linear regression equation of critical depth ratio Hf is suggested for $q_c/q_s$.