• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.235-239
• /
• 2008

Cable systems are a construction of elements carrying only tension and no compression or bending in membrane structure. Tensile membrane structures are most often used as roofs as they can economically and attractively span large distances. But cable systems have weaknesses to vibration by earthquake, wind and vehicle loads. Damage detection of cable systems by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. If cable snaps are occurred to cable release and tear in tension structures, these are set up a vibration. So, we used piezo-electric materials, and The principle of operation of a piezoelectric sensor is that a physical dimension, transformed into a force, acts on two opposing faces of the sensing element. In this study, the development on test method of cable system is proposed and tested by tensile strength using piezo-electric materials.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.161-166
• /
• 2012

This Study, as part of a study on the application plan of overseas noise prediction models suitable for making domestic noise maps, analyzed the correlation between the differences in predicted noise levels by individual noise prediction model and surveyed data on General roads and Expressways. Separation distances of 5m and 10m, respectively were set from the ends of the general roads and the expressways at the points of measurements and to check the distribution patterns of sound power levels, the levels were measured at the heights of 1.5m and 3m, respectively. The latest revised versions of the five models (CRTN, RLS90, NMPB, Nord2000, ASJ2008) suggested in The Method of making Noise Maps were used as prediction models, and predicted noise levels were calculated by using commercial software SoundPLAN (Ver 7.1).

• Journal of applied mathematics & informatics
• /
• 제12권1_2호
• /
• pp.155-164
• /
• 2003

A method is proposed to predict the distances between given residue pairs (between C$\sub$${\alpha}$/ atoms) of a protein using a sequence to structure mapping by indefinite quadratic approximation. The prediction technique requires a data fitting in three dimensional space with coordinates of the residues of known structured proteins and leads to a numerical ref resentation of 20 amino acids by minimizing a large least norm iteratively. These approximations are used in distance prediction for given residue pairs. Some computational experience on a test set of small proteins from Brookhaven Protein Data Bank are given.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2018년도 추계학술대회
• /
• pp.22-24
• /
• 2018

MPEG-I Visual group is actively working on enhancing immersive experiences with up to six degree of freedom (6DoF). In virtual space of omnidirectional 6DoF, which is defined as a case of degree of freedom providing 6DoF in a restricted area, looking at the scene from another viewpoint (another position in space) requires rendering additional viewpoints called virtual omnidirectional viewpoints. This paper presents the performance analysis on view synthesis, which is done as the exploration experiment (EE) in MPEG-I, from a set of 360 videos providing omnidirectional 6DoF in various ways with different distances, directions, and number of input views. In addition, we compared the subjective quality between synthesized images with one input view and two input views.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.463-466
• /
• 2003

Fuzzy set expressing category in fuzzy rating, which is a kind of psychological scaling, is dependent on situations. This paper assumes that a mapping exists between fuzzy sets expressing categories in some situation and those expressing same categories in another situation. fuzzy sets expressing categories in some situation are obtained by fuzzy sets expressing categories in another situation and the mapping between them. The usefulness of the present method is confirmed by the experiments comparing fuzzy sets obtained by the presented method with those identified directly by fuzzy rating. The normalized distance is used to compare both fuzzy sets and the experimental results show that the normalized distances between both fuzzy sets are enough small and that the presented method is useful for psychological scaling.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권4호
• /
• pp.333-342
• /
• 1997

The purpose of this study was to establish a set of standard values for the form of the nose and its relationship to other craniofacial structures in young korean adults in angle's class I occlusion. The subjects were 40 (20 male, 20 female) Korean dental students in angle's class I occlusion. Lateral cephalometric radiographs were used to determine the form of the nose and its positon relative to other craniofacial structures. The results were obtained as followed. 1. There was a significance between the registered male and female measurements in nasal height(P<0.05). (Male: 58.23mm Female : 54.62mm) 2. There was a significance between the registered male and female measurements in nasal length(P<0.05). (Male : 54.18mm Female : 49.38mm) 3. The vertical distances from the tip of the nose in Korean adults were significantly greater in the male(P<0.05) and were smaller in both sex in comparison with caucasian.

• 천문학회보
• /
• 제41권2호
• /
• pp.64.1-64.1
• /
• 2016

We study the evolution of a late-type galaxy (LTG) in a rich cluster environment by using N-body/SPH simulations. To do that we perform a set of simulations of a LTG falling in a Coma-like cluster and also the LTG colliding with early-type galaxies (ETGs) multiple times in the cluster environment. We use a catalog of the Coma cluster in order to estimate the typical number of collisions and the closest approach distances that a LTG would experience in the cluster. We investigate the cold gas depletion and star formation quenching of our LTG model influenced by the hot cluster gas as well as the hot halo gas of the colliding ETGs.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.1-6
• /
• 1994

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. In describing a distribution network, we have stated that it is basically a system or a set of locations that, receive or store material plus the routes that connect these locations. Whether the network is spread over some geographic region or is whitin a single facility, the definition remains the same. Implicit in this definition, however, is that both the locations and the transportation between these locations must be considered in any decisions regarding the design of the operation of the overall network. The purpose of this paper is optimal layout using transportation quantity and distance in the total system operation. And we minimize the sum of load-carrier costs and spur costs in this flow network.

• 한국경영과학회지
• /
• 제13권1호
• /
• pp.31-38
• /
• 1988

This paper presents a methodology for the development of a part classification and coding system suited to each individual company. When coding a group of parts for a specific company by a general purpose part classification & coding system like OPITZ system, it is frequently observed that we use only a small subset of total available code numbers. Such sparsity in the actual occurrences of code numbers implies that we can design a better system which uses digits of the system more parsimoniously. A 2-dimensional fuzzy ISODATA algorithm is developed to extract the important characteristics for the classification from the set of given parts. Based on the extracted characteristics nd the distances between fuzzy clustering cenetroids, a company-unique classification and coding system can be developed. An example case study for a medium sized machine shop is presented.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.75-85
• /
• 1998

A finite difference model for predicting time-dependent, wave-induced nearshore current is studied. The model includes wave refraction, wave-current interaction, bottom friction and wind effect. This model iteratively solved the linear the linear set of conservation of both mass and momentum, which were time averaged (over one wave period) and depth integrated, for mean velocities and free surface displacement. Numerical simulations of nearshore current under oblique wave attack, and for wave and wind induced current on a longshore periodic beach are carried out. Longshore velocities tend to zero in some distances outside the breaker line. And the peak velocity is shifted shoreward at the breaker line. The results represent the general characteristics of the nearshore current induced by wave.