• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.345-356
• /
• 2012

Road pavement requires repetitive maintenance works to maintain satisfactory service level to the public. However, the repetitive maintenance works upon deteriorated pavement structure make negative effects to deterioration speed. It often leads to inefficient use of limited budget. For that reason, the pavements require reconstruction work to recover their original performance. Recently, construction demands in the Korean national highway have already been reached to maximum level, and the aged pavements start to demand much more reconstruction works. However, in the real world, road agencies have often been confused when they determine maintenance design for such aged road sections due to budget constraint. It is because there is no reliable long-term maintenance strategy that supports their decision making. To support their decision making, this paper aimed to suggest the best maintenance strategy considering changing process of pavement performance by repetitive maintenance works. As an analysis method, probability distribution and hazard function to estimate the life expectancy were adopted, and then the results were used for long-term life cycle cost analysis with deterministic or Monte-Carlo method under various scenarios. As an empirical study, the Korean national highway data that has long-maintenance history data since 1986 has been applied. Last, this paper considered quality assurance of maintenance work to improve maintenance quality. These could be important information as a part of long-term maintenance strategy of pavement.

• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2013

WAVE(Wireless Access for Vehicular Environment) is new concepts and Vehicles communications technology using for ITS(Intelligent Transportation Systems) service by IEEE standard 802.11p. Also it increases the efficiency and safety of the traffic on the road. However, the efficiency of Scrambler bit computational algorithms of OFDM modulation in WAVE systems will fall as it is not able to process in parallel in terms of hardware and software. This paper proposes an algorithm to configure 64-bits matrix table in scambler bit computation as well as an algorithm to compute 64-bits matrix table and input data in parallel. The proposed algorithm on this thesis is executed using 64-bits matrix table. In the result, the processing speed for 1 and 1000 times is improved about 40.08% ~ 40.27% and processing rate per sec is performed more than 468.35 compared to bit operation scramble. And processing speed for 1 and 1000 times is improved about 7.53% ~ 7.84% and processing rate per sec is performed more than 91.44 compared to 32-bits operation scramble. Therefore, if the 64 bit-CPU is used for 64-bits executable scramble algorithm, it is improved more than 40% compare to 32-bits scrambler.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.187-196
• /
• 2014

Most Consumers don't pay attention the process of giving consent for the provision of personal information. The terms of giving consent of personal information provision including 3rd party provision related contents. Although personal information leakage were related 3rd party sharing, consumers can't recognize the details. Therefore, this study focused on the perception of 3rd party provision of personal information. Consumers recognized 3rd party as who are related the service offer or not. Consumers want to know the cases of personal information sharing to the 3rd party, and if the business operators got benefit to share personal information with 3rd party, consumers want to know the facts. To understand the terms easily, the format have to be revised and to be standardized. Standardization of consent forms is very important for consumers to understand the difficult documents and the development of the business system to collect and use consumer's personal information to guarantee the right to self-determination of personal information.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.67-84
• /
• 2012

Recent increases in uncertainty and speed of market change are driving the adoption of new intelligent mobile office systems. Organizational information systems paradigm suggests that a right match between organizational characteristics and the use of technology is critical in producing desired results. Following such perspective this study developed the mobile office system case of Seoul Metropolitan Railway Transit(SMRT) in Korea. SMRT developed the mobile task-supporting environment that help the management of subway lines real-time without the restriction of time and space. They named the system as ST&F(SMRT Talk and Flash). They decided to develop the application systems in-houses they did not want to be overly dependent on external services in future changes and developments of the system. The new practice reduced the time for moving back and forth to 10% of their working time from previous 20%. The time used for paper works and administration chore also reduce to 10% of their working time from previous 30% on the average. The employees could use 80% of their time to concentrate on the completion of assigned task. The effects of this improvement resulted in the heightened efficiency of the use of human resources and the heightened level of railway safety. The case of SMRT shows that the mobile office system can be applied and extended to various business areas such as facility management and maintenance beyond such typical uses as sales and marketing support. Also, The result of case study will be a useful guideline on the construction and using of mobile office system.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.41-46
• /
• 2014

Purpose - This study focused on providing strategic findings that make significant sense for companies that are looking for a future outsourcing strategy. The study analyzes the results of outsourcing in the information logistics systems field and verifies the results through experimental study of the performance delivered by logistics outsourcing types. Research design, data, and methodology - The study sample was assembled based on a random sampling method used to extract the initial 451 companies from a list of Korean distributors, wholesalers, and retailers. Following that sample process, 423 companies were confirmed by verifying their e-mail address and contacts (telephone and fax numbers), and were selected as initial research subjects. We reduced that number to 331 companies for the survey sample through telephone interviews in advance with the 423 companies that were targeted, in order to verify whether they are in the field of outsourcing of information logistics systems. The period of the survey extended from November 10, 2013 to January 10, 2014. The number of collected surveys totaled 181. We reviewed the contents of the survey responses, and reduced the number of research subjects to 175. In this study, we used a standard analysis to investigate whether there is a difference in distribution results based on different types of outsourcing information in the logistics system field and, through T-verification, we investigated whether the difference between distribution results in each group resulting from that standard analysis is statistically significant. Results - These results show that there is a difference in distribution outcome, based upon type of distribution outsourcing. In addition, we determined that they are meaningful results by confirming that, for usability and to improve the capabilities of a third-party logistics service supplier, both the choice of reasonable outsourcing types and the enhancement of various types of alliances are very important success factors. Taken together these study results, with a goal of enhancing the distribution capabilities of a Korean distributor, can be implemented to enhance management results achievable by supplying an information logistics system in the form of strategic outsourcing rather than in the form of simple outsourcing. In addition, the outcomes of logistics distributors in Korea that are using outsourcing in the logistics information systems field show high performance results in commercial endeavors in the following order: competitive, pre-competitive, non-competitive, and pro-competitive. Conclusions - This study focused on providing strategic findings. However, in the case of outsourcing in the field of information logistics systems of Korean distributors, there has been a focus on simple outsourcing rather than on strategic outsourcing; furthermore, there has been a concentration on non-competitive forms instead of pro-competitive forms, which could achieve better distribution results. This discussion is presented in more detail in the analysis results of this study.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.73-79
• /
• 2020

This study aims to study the problems and solutions of institutional support for the elderly living alone, focusing on the General Support for Living Alone Elderly announced by the Ministry of Health and Welfare in 2018. Results, First, a customized support system for the elderly living alone should be introduced. In order to improve the life satisfaction of the elderly living alone, it is necessary to develop a program that meets the most basic daily life needs, and a specific plan and a support system to link services should be prepared. Second, it is necessary to increase social interest in the elderly living alone. Solving problems for the elderly living alone should be preceded by social interest in the elderly living alone. For this, it is necessary to strengthen the social network. Third, it proposes legislation and amendment for the elderly living alone. Some revisions of existing laws have limitations, and are resolved through individual laws, such as standards and definitions for various types of elderly jobs, reorganization of the delivery system including agencies dedicated to elderly jobs, workers-related regulations, and preferential purchase systems for senior products. It is desirable to do. In conclusion, welfare support for the elderly living alone should be comprehensive and comprehensive. For the welfare of the elderly living alone, personalized care services should be provided first, and social support for the elderly living alone should be promoted on the basis of increasing social interest, and laws and revisions must be actively and proactively made for the elderly living alone.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.2
• /
• pp.55-71
• /
• 2020

Objective : The purpose of this study was to investigate the necessity of occupational therapist's involvement in patient discharge planning, the areas that should be considered for discharge screening and planning, and to provide the basic data required for the development of a discharge assessment tool. Methods : We conducted an online questionnaire survey of 60 occupational therapists who were working at medical institutions and had agreed to participate in the study. The questionnaire was composed of 36 questions regarding the general characteristics of the current discharge planning process and the necessity of discharge assessment and planning. Descriptive statistics, an independent t-test, and a one-way ANOVA were conducted using SPSS 20.0. As for the post-hoc test, Scheffe's test was used. Results : The awareness of occupational therapist's role in discharge planning and the necessity of a discharge assessment tool were high, but the occupational therapist's awareness of discharge-related knowledge was low. The difficulties in discharge planning showed high response rate in the absence of adequate fee-for-service in the patient interview and assessment and the lack of team approach and appropriate assessment tools for discharge planning. The high-needs areas for evaluation during discharge were fall risk and BADL, and the low-needs areas were well-being and functional level prior to onset. Conclusion : This study is expected to provide preliminary information necessary for the development of a discharge assessment tool for effective discharge planning.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.81-93
• /
• 2015

Purpose - "Showrooming" refers to the phenomenon where a shopper visits a store to see and compare products but makes the purchase online at a lower price. Surveys on showrooming activities at home and abroad indicate that a significant number of consumers pursue showrooming activities. The advent of "showroomers," who engage in buying activities, hovering both on and offline, while selectively choosing sales channels to suit their needs, is powerful enough to erode the borders between channels and bring about seismic changes in the distribution industry. However, surprisingly, there has been no in-depth discussion on showrooming. This study seeks to theoretically investigate what impact personal characteristics have on showrooming preferences and attitudes in a multi-channel environment. Specifically, assumptions have been made that price perception, perceived performance risk, and trust in online shopping not only have a direct impact on showrooming attitudes but also indirectly affect it through the means of contact motivation. Research design, data, and methodology - To test the hypotheses, this study conducted a survey of male and female shoppers, ages 20 through 40s, who live in metropolitan areas, and have actively showroomed fashion items in the last six months. A clothing item usually purchased after a careful decision-making process was chosen as the target product of the study. The survey was conducted between October and November 2014, using a professional survey service provider. A total of 200 surveys were collected, of which 198 were used for analysis. Conceptual model Structural Equation Modeling (SEM) and Amos 18.0 were employed for data analysis and model verification. In addition, following the confirmatory factor analysis and measurement model analysis, the theoretical model that corresponds to the research model was analyzed. Results - Analysis results show that price perception, perceived performance risk, and trust in online shopping have a statistically significant and positive (+) impact on showrooming attitudes. In addition, in terms of the indirect influence of price perception and perceived performance risk on showrooming attitudes through means of contact motivation, price perception had a statistically significant and positive impact on means of contact motivation, whereas perceived performance risk did not have a statistically significant impact on it, with the relevant hypothesis rejected. Conclusions - These analysis results imply that the ultimate goal of consumers is to maximize their shopping benefits by selectively and strategically taking advantage of different channels in a complementary manner. This study presents many implications for distributors to encourage a deep understanding of showrooming consumers who have complicated consumption behaviors and to build channel integration strategies. This study has limitations in theoretical and practical implications. Therefore, subsequent studies need to focus on verifying that showrooming activities are based on reasonable and planned decisions by applying the theory of reasoned or planned behavior. In addition, the scope of the study should expand to include web showrooming, where consumers conduct product research online and purchase offline.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.371-377
• /
• 2017

General phantom for practical X-ray photography Practical phantom is an indispensable textbook for radiology, but it is difficult for existing commercially available phantom to be equipped with various kinds of phantom because it is an expensive import. Using 3D printing technology, I would like to make the general phantom for practical X-ray photography less expensive and easier. We would like to use a skeleton model that was produced based on CT image data using a 3D printer of FDM (Fused Deposition Modeling) method as a phantom for general X-ray imaging. 3D slicer 4.7.0 program is used to convert CT DICOM image data into STL file, convert it to G-code conversion process, output it to 3D printer, and create skeleton model. The phantom of the completed phantom was photographed by X - ray and CT, and compared with actual medical images and phantoms on the market, there was a detailed difference between actual medical images and bone density, but it could be utilized as a practical phantom. 3D phonemes that can be used for general X-ray practice can be manufactured at low cost by utilizing 3D printers which are low cost and distributed and free 3D slicer program for research. According to the future diversification and research of 3D printing technology, it will be possible to apply to various fields such as health education and medical service.

• Informatization Policy
• /
• v.24 no.2
• /
• pp.87-104
• /
• 2017

The Fourth Industrial Revolution, which is based on the development of information and communication technology (ICT), is expected to replace human knowledge work, which will cause problems of mass unemployment and wide income gap from job polarization. Furthermore, the change is expected to be rapid and wide, demanding proactive measures to respond to such abrupt social changes. However, previous literatures assume that the traditional form of employment will continue and provide limited solutions only. On the other hand, the Fourth Industrial Revolution will enable transition to the Prosumer Economy, which will ultimately lead consumers to become producers through increased job flexibility. If the prosumer economy arrives and the consumers become producers, it will no longer be the matter of finding workplace but rather, the matter of finding the work itself. In this regard, the new technologies of the Fourth Industrial Revolution can be the fundamental solution to such job issues. This paper suggests stable transition to the Prosumer Economy in order to solve the job issues in the age of the Fourth Industrial Revolution. In order to effectively support the process, this paper suggests first, ensuring the amount of education by shortening labor time; second, facilitating life-time education through free online education service; and third, closing the digital divide through mandatory use of the e-government system.