• KCI Concrete Journal
• /
• 제12권2호
• /
• pp.55-72
• /
• 2000

This paper proposes a mechanical model to describe the load-deformation responses of the reinforced concrete plate members under service load state. An Analytical method is introduced on the basis of the rotating crack model which considers equilibrium, compatibility conditions, load-strain relationship of cracked member, and constitutive law for materials. The tension stiffening effect in reinforced concrete structures is taken into account by the average tensile stress-strain relationship from the load-strain relationship for the cracked member and the constitutive law for material. The strain compatibility is used to find out the crack direction because the crack direction is an unknown variable in the equilibrium and compatibility conditions. The proposed theory is verified by the numerous experimental data such as the crack direction, moment-steel strain relationship, moment-crack width relationship. The present paper can provide some basis for the provision of the definition of serviceability for plate structures of which reinforcements are deviated from the principal stresses, because the present code defines the serviceability by the deflection, crack control, vibration and fatigue basically for the skeletal members. The proposed theory is applicable to predict the service load state behavior of a variety of reinforced concrete plate structures such as skew slab bridges, the deck of skew girder bridges.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.53-64
• /
• 1999

A theory is proposed to predict the response of the load-deformation relationship of the reinforced concrete structures under the service state after cracking. The crack direction and concrete strains through the loading history before failure can be estimated by this theory based on the rotating crack model, which considers equilibrium, compatibility conditions, and average stress-strain relationship. The proposed crack direction and deformation show good agreement with test results under service state. The behavior of a variety of concrete structures, such as shear walls, deep beams and the web of box girders, can be predicted by this proposed theory under service state.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.755-762
• /
• 2007

노후된 PSC I 거더교에 대한 내하력 평가 방법과 외부 강선으로 보강된 교량의 성능 평가 및 보강 효과 검증 방법은 재하 차량을 이용한 현장 실험이 많이 사용된다. 하지만 재하 차량에 의한 실험은 탄성 범위 내의 사용하중 상태에서 이루어지므로 활하중에 의한 교량의 거동 특성 분석만 유효하며, 균열하중 이후에 나타나는 비선형 거동과 극한 상태에서의 내하력을 평가하는 것은 불가능하다. 이 실험 연구에서는 27년 동안 공용된 PSC I 거더교를 대상으로 여러 가지 재하 시험을 실시하여 사용하중 및 극한하중에 대한 교량의 거동 특성과 내하 능력을 분석하였다 또한 외부 강선 보강 방법의 보강 효과를 검증하기 위하여 기존 교량의 내부 PS 강선을 절단하여 인위적으로 손실을 유도하고 평가하였으며, 절단된 양 만큼을 외부 강선으로 보강하여 보강 전후의 거동 변화를 비교하였다. 이 실험 결과를 이용하면 PSC I 거더교에 외부 강선 보강 방법을 적용할 경우에 요구되는 기존 교량의 내하력, 요구 보강량, 보강 공사시 품질관리 기준 등을 보다 명확하게 결정할 수 있을 것이다.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.207-211
• /
• 2006

This paper presents an experimental study on the repair performance of sprayed engineered cementitious composites(ECC) serving as a repair material. Sprayable ECC, which exhibit tensile strain-hardening behavior in the hardened state and maintain sprayable properties in the fresh state, have been developed by using a parallel control of micromechanical design and rheological process design. The effectiveness of sprayable ECC in providing durable repaired structures was assessed by spraying the ECC and testing them for the assessment. The experimental results revealed that, when sprayed ECC were used as a repair material, both load carrying capacity and ductility represented by the deformation capacity at peak load of the repaired flexural beams were obviously increased compared to those of commercial prepackaged mortar(PM) repaired beams. The significant enhancement in the energy absorption capacity and tight crack width control of the ECC repair system treated with wet-mix spraying process suggests that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.295-304
• /
• 2016

An experimental investigation on the behaviour of concrete beams reinforced with various reinforcement, including ordinary steel bars, CFRP bars and CFRP prestressed concrete prisms(PCP). The main variable in the test program was the level of prestress and the cross section of PCP.The modes of failure and the crack width were observed. The results of load-deflection and load-crack width characteristics were discussed. The results showed that the CFRP prestressed concrete prisms as flexural reinforcement of concrete beams could limit deflection and crack width under service load and PCP can overcome the serviceability problems associated with the low elastic modulus/strength ratio of CFRP.

• 한국재난정보학회 논문집
• /
• 제20권2호
• /
• pp.329-338
• /
• 2024

연구목적: 본 연구는 긴장방식을 복합적으로 적용한 세그멘탈 PSC U형 거더에 대한 해석적 거동을 기반으로 실대형 실험체의 휨 거동 결과를 평가하여 거동의 안전성을 검증하고자 한다. 연구방법: 도로교설계기준 한계상태설계법의 사용한계 및 극한한계상태 설계 결과를 바탕으로 40m 실대형 실험체의 가력하중을 산정하고 이에 대한 4점재하방식 정적 하중재하 실험을 수행하였다. 연구결과: 설계하중, 균열하중 및 극한하중이 작용할 때 해석적 처짐값 대비 97.1%, 98.5% 그리고 79.0%에 해당하는 실험체 처짐이 발생하였다. 설계하중, 균열하중 및 극한하중이 작용할 때 균열계는 각 연결부에서 0.009~0.035mm, 0.014~0.050mm, 6.383~5.522mm로 계측되었다. 결론: 균열하중 재하시까지 실험체는 탄성적으로 거동하였고 균열발생 후 극한하중까지 변형율-경화현상을 보이며 작용하중에 대하여 휨 저항 거동이 뚜렷이 나타났음을 확인하였다. 실대형 실험체 연결부(Dry Joint) 균열은 시설물 상태평가 B등급 기준 25% 미만의 결과로써 연결부의 탄성적 거동을 확인하였고 극한하중 제거 후 최종적 잔류 변형은 0.114mm로써 세그먼트 연결부의 안정적 거동을 확인하였다.

• 대한토목학회논문집
• /
• 제9권4호
• /
• pp.27-39
• /
• 1989

부분(部分) 프리스트레스트 콘크리트는 철근(鐵筋) 콘크리트와 완전(完全) 프리스트레스트 콘크리트의 중간정도(中間程度)의 프리스트레스를 가(加)한 부재(部材)이다. 부분(部分) 프리스트레스트 콘크리트 부재(部材)를 사용(使用)함으로써 완전(完全) 프리스트레스트 콘크리트 부재(部材)의 사용상태(使用狀態)의 이점(利點)과 철근(鐵筋) 콘크리트 부재(部材)의 극한상태(極限常態)의 장점(長點)을 동시(同時)에 취(取)할 수 있다. 본(本) 연구(硏究)는 프리스트레스 정도(程度), 전단철근(剪斷鐵筋)의 배근(配筋)과 단면형태(斷面形態)의 변화(變化)가 부분(部分) 프리스트레스트 콘크리트 부재(部材)의 휨 및 전단(剪斷) 극한거동(極限擧動)에 미치는 영향을 알기 위해서 총 12개의 부분(部分) 프리스트레스트 콘크리트 부재(部材)에 대(對)하여 파괴실험(破壞實險)을 행(行)한 것이다. 이 논문(論文)에서는 실험과정(實驗過程) 기술(記述)하고 실험부재(實驗部材)의 파괴양상(破壞樣相)을 분석(分析)하며, 여러 연구자(硏究者)들이 제안(提案)한 각각의 프리스트레싱 지표(指標)의 유용성(有用性)을 검토(檢討)한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.53-56
• /
• 2002

In this paper, we study the network structure that can guarantee the end-to-end quality of service in the Explicit multicast network. In order to guarantee the end-to-end quality of service, we adopt the end-to-end measurement based admission control (EMBAC) scheme. For the effective measurement of the network state and minimum influence on the current data traffic, the queue structure, which the drop precedence in assured forwarding (AF) Per hop behavior (PHB) of the differentiated service (Diffserv) is applied to, is proposed. Through a simulation, we show that EMBAC can make tile controlled load service in tile AF PHB applied Xcast network, and the qualify of the admitted traffic is guaranteed. In addition, the performance of the EMBAC is changing according to the selling parameter of AF PHB.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.281-284
• /
• 2006

ASCE-ACI Committee 426 and 445, on Shear and Torsion, well noted in their report that recent research work regarding shear and torsion had been devoted primarily to members. But it was not logical approach of PSC members applied by axial force based on the shear deformation in web element. And it was not included that the effect of axial is to shift the shear strain(or crack width) in the web element versus the applied shear curve up or down by the amount by which the biaxial tension-compression state varies. The shear strength also increases or decreases, so that the change in shear strain at service load due to the presence of axial load is to some extent changed. Generally, in corresponding beams the shear strain at service load is less in the beam subject to axial compression and greater in the beam subject to axial tension, than in the beam without axial load. In particular, however, no research were available on the shear deformation in shear of PSC members with web reinforcement, subject to axial force in addition to shear and bending. Therefore, this study was basically performed to develop the program for the calculation of the shear deformation based on the shear effect of axial force in prestressed concrete members.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.741-759
• /
• 2020

Steel plate-concrete composite slabs provide attractive features, such as more effective loading transfer, and more cost-effective stay-in-place forms, thereby enabling engineers to design more high-performance light structures. Although significant studies in the literatures have been directed toward designing and implementing the steel plate-concrete composite beams, there are limited data available for understanding of the composite slabs. To fill this gap, nine the composite slabs with different variables in this study were tested to unveil the impacts of the critical factors on the ultimate strength behavior. The key information of the findings included sample failure modes, crack pattern, and ultimate strength behavior of the composite slabs under either four-point or three-point loading. Test results showed that the failure modes varied from delamination to shear failures under different design factors. Particularly, the shear stud spacing and thicknesses of the concrete slabs significantly affected their ultimate load-carrying capacities. Moreover, an analytical model of the composite slabs was derived for determining their ultimate load-carrying capacity and was well verified by the experimental data. Further extensive parametric study using the proposed analytical methods was conducted for a more comprehensive investigation of those critical factors in their performance. These findings are expected to help engineers to better understand the structural behavior of the steel plate-concrete composite slabs and to ensure reliability of design and performance throughout their service life.