• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.41-46
• /
• 1983

The current-fed DC-DC converter has only one energy storage reactor in series with the input for any number of outputs and is insensitive to transformer volt-second unbalance. It is considered that these properties of the converter are considerable advantages over other maltiple-output circuits. The steady-state and dynamic characteristic and stability for the current-fed DC-DC con-verter are analyzed in detail. The analysis is carried out by the state-space averaging method for the operation with the duty ratio less than 50% and is confirmed by the experiment. From the evaluation of stability it is identified that the stability of this converter is excellent as compared with that of the conventional buck type converter.

• Journal of electromagnetic engineering and science
• /
• v.17 no.2
• /
• pp.71-75
• /
• 2017

A dual-band tunable-slot-type ground radiation antenna is proposed. The feeding structure consists of a coplanar waveguide and a lumped capacitor to excite currents for first- and second-order resonant modes of the ground. The resonant frequencies of both bands are controlled using a series combination of a capacitor and an inductor. The proposed design may be an attractive choice for mobile devices owing to its compact geometry and tunable operating frequencies. The measurement and simulation results of the proposed antenna show good agreement, indicating good impedance matching and radiation performance.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.6
• /
• pp.451-457
• /
• 1989

The current-fed DC-DC converter, which is known as the most stable DC-DC converter, has a two-winding reactor in series with the input. In this paper a new double-output DC-DC converter circuit, in which the 2nd winding of the reactor is creating the 2nd output, while the 2nd winding is feeding the energy to the input in the current-fed converter, is propose. The steady state characteristics of the new circuit are clarified and it is found that the maximum value exists in the 2nd output. Furthermore, regulation characteristic is analysed by 'Slope method' and the result shows good agreement with experimental value. The 2nd output voltage regulation is performed by using regulation IC. As a result, we have achieved good regulation characteristics.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1181-1183
• /
• 2003

Cold cathode fluorescent lamp(CCFL) are widely used to illuminate the liquid crystal display(LCD). Usually, CCFL dimming methods are used to lamp current regulation or average current adjust feeding the CCFL inverter. Switching frequency of inverter is higher than resonant frequency at stabile states. In this study, design of CCFL driving circuit by half-bridge type series and parallel resonant inverter that variable frequency modulation method to control the output power. This method has advantages such as low EMI and reduced harmonics. And it is easy to dimming control use microprocessor. The validity of this study is confirmed from the simulation and experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.240-243
• /
• 2003

Finite element analyses for bursting failure prediction in bulge forming under combined internal pressure and independent axial feeding are carried out. By means of the FEM combined with Oyane's ductile fracture criterion based on Hills quadratic plastic potential, the forming limit and bursting pressure level are investigated for a seamed tube that comprises of weldment, heat affected zone(HAZ) and base material parts. Especially, in order to determine the material property of HAZ tensile tests for the base material and the weld metal are executed based on iso-strain approach. Finally, through a series of bulge forming simulations with consideration of the weldment and HAZ it is concluded that the proposed method would be able to predict the bursting pressure and fracture initiation site more realistically, so the approach can be extended to a wide range of practical bulge forming processes.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.5
• /
• pp.680-686
• /
• 2023

Aging is a complex series of multi-organ processes that occur in various organisms. As such, an in vivo study using an animal model of aging is necessary to define its exact mechanisms and identify anti-aging substances. Using Drosophila as an in vivo model system, we identified Crataegus pinnatifida extract (CPE) as a novel anti-aging substance. Regardless of sex, Drosophila treated with CPE showed a significantly increased lifespan compared to those without CPE. In this study, we also evaluated the involvement of CPE in aging-related biochemical pathways, including TOR, stem cell generation, and antioxidative effects, and found that the representative genes of each pathway were induced by CPE administration. CPE administration did not result in significant differences in fecundity, locomotion, feeding amount, or TAG level. These conclusions suggest that CPE is a good candidate as an anti-aging food substance capable of promoting a healthy lifespan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.935-944
• /
• 2013

Essential oils have been shown to favorably effect in vitro ruminal fermentation, but there are few in vivo studies that have examined animal responses. The objective of this study was to evaluate the effects of thyme (THY) and cinnamon (CIN) essential oils on feed intake, growth performance, ruminal fermentation and blood metabolites in feedlot calves fed high-concentrate diets. Twelve growing Holstein calves ($213{\pm}17kg$ initial BW) were used in a completely randomized design and received their respective dietary treatments for 45 d. Treatments were: 1-control (no additive), 2-THY (5 g/d/calf) and 3-CIN (5 g/d/calf). Calves were fed ad libitum diets consisting of 15% forage and 85% concentrate, and adapted to the finishing diet by gradually increasing the concentrate ratio with feeding a series of transition diets 5 wk before the experiment started. Supplementation of THY or CIN did not affect DMI and ADG, and feed efficiency was similar between treatment groups. There were no effects of additives on ruminal pH and rumen concentrations of ammonia nitrogen and total VFA; whereas molar proportion of acetate and ratio of acetate to propionate decreased, and the molar proportion of propionate increased with THY and CIN supplementation. Rumen molar concentration of butyrate was significantly increased by adding CIN compared to control; but no change was observed with THY compared with control group. No effects of THY, or CIN were observed on valerate, isobutyrate or isovalerate proportions. Plasma concentrations of glucose, cholesterol, triglyceride, urea-N, ${\beta}$-hydroxybutyrate, alanine aminotransferase and aspartate aminotransferase were not changed by feeding THY or CIN. Results from this study suggest that supplementing a feedlot finishing diet with THY or CIN essential oil might be useful as ruminal fermentation modifiers in beef production systems, but has minor impacts on blood metabolites.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.147-154
• /
• 2001

In Korea and Japan, dried oak mushrooms are classified into 12 to 16 different categories based on its external visual quality. And grading used to be done manually by the human expert and is limited to the randomly sampled oak mushrooms. Visual features of dried oak mushrooms dominate its quality and are distributed over both sides of the gill and the cap. The 2nd prototype computer vision based automatic grading and sorting system for dried oak mushrooms was developed based on the 1st prototype. Sorting function was improved and overall system for grading was simplified to one stage grading instead of two stage grading by inspecting both front and back sides of mushrooms. Neuro-net based side(gill or cap) recognition algorithm of the fed mushroom was adopted. Grading was performed with both images of gill and cap using neural network. A real time simultaneous discharge algorithm, which is good for objects randomly fed individually and for multi-objects located along a series of discharge buckets, was developed and implemented to the controller and the performance was verified. Two hundreds samples chosen from 10 samples per 20 grade categories were used to verify the performance of each unit such as feeding, reversing, grading, and discharging unites. Test results showed that success rates of one-line feeding, reversing, grading, and discharging functions were 93%, 95%, 94%, and 99% respectively. The developed prototype revealed successful performance such as the approximate sorting capability of 3,600 mushrooms/hr per each line i.e. average 1sec/mushroom. Considering processing time of approximate 0.2 sec for grading, it was desired to reduce time to reverse a mushroom to acquire the reversed surface image.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.416-423
• /
• 2016

In this paper, a conformal type $1{\times}4$ microstrip patch array antenna with tilted antenna beam is presented for UWB sensor applications. Each antenna element comprises E-shaped patch with L-probe feeding to increase the bandwidth. The tilted antenna beam of 20 degree can be achieved with 42 ps microstrip delay lines at the series feeding network with T-junctions. The measured reflection coefficient is >9 dB at 3.5~4.5 GHz. The measured antenna gain and HPBW are >10 dBi and <30 degree at 3.75~4.25 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.357-365
• /
• 2013

The 4 by 4 series slot sub-array antenna is proposed using substrate integrated waveguide(SIW) technology for 35 GHz of Ka band application. The proposed antenna is realized with multi-layered structure for compact size and easy integration features. 4 by 4 radiating slots are arrayed on top PCB with equal spacing and the feeding SIWs are arranged on middle and bottom PCBs for uniform power distribution. The multi-layered antenna is realized using RT/Duroid 5880 that has dielectric constant of 2.2 and the total antenna size is $750.76mm^2$. The individual parts such as radiators and feeding networks are simulated using full-wave simulator CST MWS. Furthermore, the total sub-array antenna also fabricated and measured the electrical performances such as impedance bandwidth under the criteria of -10 dB(490 MHz), maximum gain(18.02 dBi), sidelobe level(SLL)(-11.0 dB), and cross polarization discrimination (XPD)(-20.16 dB).