• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.123-137
• /
• 2017

Competitiveness of small and medium companies often rely on the competency of their employees. Many employees however try to move to better environments if possible, which results in high uncertainty in maintaining solid human resources. The purpose of this paper is to investigate the influencing factors of turnover intention and organizational loyalty of the early experienced, especially three to five years experienced, employees in the small and medium enterprises. A survey had been conducted using both LMX (Leader Member eXchange) and TMX (Team Member eXchange) as an effort to test the impact of strategic human resource management factors on turnover intension and organizational loyalty. It has been observed that the level of LMX is critical on the turnover intension, while the levels of LMX and TMX are positively related to the organizational loyalty. Especially significant mediation effect affects on the organizational loyalty for TMX via LMX in the serial structure. The human resource management factors become effective under the circumstances where leader and team members exchange activities are activated. These findings can be used in reducing turnover intention and increasing organizational loyalty of early experienced employees by enhancing the leadership training of middle level managers of the small and medium enterprises organizations. Besides, a set of active communication channels should be provided for the young employees so that they can share their work experiences and difficulties within the organization. The key results of this study may help the practitioners set up a management plan to maintain a low turnover rate for their organizations.

• YAKHAK HOEJI
• /
• v.40 no.3
• /
• pp.351-356
• /
• 1996

The preparation of Enterococcus faecalis RSI is used as a therapeutics for human intestinal disorders. However, the microbe in this preparation is usually very sensitive to rifampicin and fluoroquinolones. If this preparation is taken with rifampicin or fluoroquinolones, its therapeutic effect can not be expected. E. faecalis RFR11, containing resistance to rifampicin was obtained by MNNG mutation method. Serial passage of E. faecalis RFR11 produced E. feacalis OFR16 on agar with 2-fold minimal inhibitory concentration of ofloxacin produced. E. feacalis OFR16 was resistant to fluoroquinolones up to 8-256 fold higher than that for the original strain. E. faecalis OFR16 also exhibited identical characteristics with the parent strain when they were tested for lactic acid formation and growth inhibition of E. coli MB4-5737 and Shigella sonnei MB4-10411. From in vitro test, it was identified that rifampicin and ofloxacin is not inactivated by certain factors of E. faecalis OFR16. Conclusively. E. faecalis OFR16, rifampicin and fluoroquinolones resistant mutant, is an efficient strain that has insensitivity against rifampicin and fluoroquinolones and original biochemical characteristics of the parent strain.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.62-70
• /
• 2007

In this paper, we design a mobile camera processor to support the MIPI CSI-2 and DPHY specification. The lane management sub-layer of CIS2 handles multi-lane configuration. Thus conceptually, the transmitter and receiver have each independent buffer on multi lanes. In the proposed architecture, the independent buffers are merged into a single common buffer. The single buffer architecture can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. For a key issue for the data synchronization problem, the synchronization start codes are added as the starting for image data. We design synchronization logic to synchronize the received clock and to generate the byte clock. We present the verification results under proposed test bench. And we show the waves of simulation and logic synthesis results of the designed processor.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.56-61
• /
• 2001

This paper presents the real-time implementation of an AMR (Adaptive Multi Rate) vocoder which is included in the asynchronous International Mobile Telecommunication (IMT)-2000 mobile ASIC. The implemented AMR vocoder is a multi-rate coder with 8 modes operating at bit rates from 12.2kbps down to 4.75kbps. Not only the encoder and the decoder as basic functions of the vocoder are implemented, but VAD (Voice Activity Detection), SCR (Source Controlled Rate) operation and frame structuring blocks for the system interface are also implemented in this vocoder. The DSP for AMR vocoder implementation is a 16bit fixed-point DSP which is based on the TeakLite core and consists of memory block, serial interface block, register files for the parallel interface with CPU, and interrupt control logic. Through the implementation, we reduce the maximum operating complexity to 24MIPS by efficiently managing the memory structure. The AMR vocoder is verified throughout all the test vectors provided by 3GPP, and stable operation in the real-time testing board is also proved.

• Clinical and Experimental Reproductive Medicine
• /
• v.47 no.2
• /
• pp.135-139
• /
• 2020

Objective: In the present study, we aimed to retrospectively evaluate the cumulative live birth rate (LBR) after up to three consecutive embryo transfer (ET) cycles, either fresh or frozen, in women with expected poor ovarian response (ePOR). Methods: We selected 115 women who entered the first in vitro fertilization (IVF) cycle between August 2013 and July 2016. The women were divided into an ePOR group (37 women) and a non-ePOR group (78 women). All women in the ePOR group were ≥ 40 years old or had serum anti-Müllerian hormone levels of less than 1.1 ng/mL at the time of the first IVF cycle. Live birth outcomes were monitored until December 2017. The cumulative LBR (with both conservative and optimistic estimates) was calculated according to the serial number of ET cycles. Results: After up to three ET cycles, the overall cumulative LBR was significantly lower in the ePOR group than in the non-ePOR group (conservative estimate, 10.8% vs. 44.9%, respectively; optimistic estimate, 14.7% vs. 56.1%, respectively; log-rank test, p= 0.003). Conclusion: Women with ePOR exhibited a lower cumulative LBR than women in the non-ePOR group, and this information should be provided to ePOR women during counseling before starting IVF.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1778-1790
• /
• 2018

Based on the requirements and characteristics of multi-zone autonomous decision-making in modern power system, fully distributed computing methods are needed to optimize the economic dispatch (ED) problem coordination of multi-regional power system on the basis of constructing decomposition and interaction mechanism. In this paper, four fully distributed methods based on alternating direction method of multipliers (ADMM) are used for solving the ED problem in distributed manner. By duplicating variables, the 2-block classical ADMM can be directly used to solve ED problem fully distributed. The second method is employing ADMM to solve the dual problem of ED in fully distributed manner. N-block methods based on ADMM including Alternating Direction Method with Gaussian back substitution (ADM_G) and Exchange ADMM (E_ADMM) are employed also. These two methods all can solve ED problem in distributed manner. However, the former one cannot be carried out in parallel. In this paper, four fully distributed methods solve the ED problem in distributed collaborative manner. And we also discussed the difference of four algorithms from the aspects of algorithm convergence, calculation speed and parameter change. Some simulation results are reported to test the performance of these distributed algorithms in serial and parallel.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.53-60
• /
• 2002

This paper describes a Gray Mode Graphic STN LCD drive circuit using USB interface. The drive circuit using USB interface can highly transfer image data created under PC t LCD. Hence, the LCD drive circuit doesn't use microprocessor for the convenience of users. The proposed LCD drive circuit part have been verified by simulation and by ALTERA EPF10K10TC144-3 FPGA implementation in VHDL. The USB interface part have been programmed in MS-Visual C++ 6.0. The validity and efficiency of the proposed LCD drive circuit have been verified by test board. After comparing this LCD drive circuit to specify it was verified that the developed LCD drive circuit showed good performances, such as convenience of users, low cost.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.102-105
• /
• 2002

ADSS(All Dielectirc Self-Supporting) cable installed under high voltage power cable line suffers a variety of environmental influence, rain, wind, snow fall, chemical pollution, salt fog and electrical stress. Its lifetime is required to be at least 20 years with this harsh weathering condition. The electrical stress under high voltage power line gives rise to dry band arcing and tracking, the severest damage, on the outer sheath of cable. Finally tracking might penetrate sheath and cause the break-down of ADSS cable. Tracking resistant sheath material, therefore, should be used to protect the core of ADSS from dry band arcing and to be sure long lifetime. In this work, we discuss various commercial tracking resistant material to investigate the way of track resistance and compare their mechanical, electrical, weathering and tracking properties through serial experiments. We found track resistant material is categorized into two main type : polyethylene with metal hydroxide and polyethylene with reduced carbon black. The Liquid contaminant, Inclined plane Tracking and Erosion test says the time to track of tracking resistant material with metal hydroxide has a little longer time to track in the high applied voltage than that with carbon black, but mechanical and weathering properties were inferior to.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.4
• /
• pp.235-243
• /
• 2012

Objectives: Nail has been a substitute DNA source for genotyping. To investigate the integrity and consistency of nail DNA amplification for biomarker study, nail clippings from 12 subjects were collected at monthly intervals. The possibility of longer amplification and existence of GAPDH RNA/protein, were also investigated with three nail samples. Methods: Three primer sets were designed for quantitative amplification of nuclear and mitochondrial genes and analysis of their consistency. The mean threshold cycles in amplification of the target genes were compared to test the consistency of polymerase chain reaction (PCR) performance among individual factors including age groups, sex, family, the nail source, and by the size of the amplification segments. Results: The amplification of the target genes from nail DNA showed similar integrity and consistency between the nail sources, and among the serial collections. However, nail DNA from those in their forties showed earlier threshold cycles in amplification than those in their teens or seventies. Mitochondrial DNA (mtDNA) showed better DNA integrity and consistency in amplification of all three targets than did nuclear DNA (nucDNA). Over 9 kb of mtDNA was successfully amplified, and nested quantitative PCR showed reliable copy numbers (%) between the two loci. Reverse transcription PCR for mRNA and immunoblotting for GAPDH protein successfully reflected their corresponding amounts. Regarding the existence of RNA and protein in nails, more effective extraction and detection methods need to be set up to validate the feasibility in biomarker study. Conclusions: Nail DNA might be a feasible intra-individual monitoring biomarker. Considering integrity and consistency in target amplification, mtDNA would be a better target for biomarker research than nucDNA.

• YAKHAK HOEJI
• /
• v.41 no.4
• /
• pp.450-455
• /
• 1997

The preparation of Bacillus coagulans is used as a therapeutics for human intestinal disorders. However, the bacterium in the preparation is very susceptible to rifampic in and fluoroquinolones. When the preparation is taken with rifampicin or fluoroquinolones, its therapeutic effect can not be expected. So B. coagulans RFR17 resistant to rifampicin was obtained by treating the parent B. coagulans with N-methyl-N'-nitro-N-nitrosoguanidine. B. coagulans OFR17 was produced by serial passage of B. coagulans RFR17 on agar with 2-fold minimal inhibitory concentration of ofloxacin or ciprofloxacin. B. coagulans OFR17 was resistant to fluoroquinolones up to 16~64 fold higher than that for the original strain. B. coagulans OFR17 also exhibited identical characteristics with the parent strain when they were tested for lactic acid production and growth inhibition of E. coli MB4-01 and Shigella sonnei MB4-10411. From in vitro test, it was also identified that rifampicin and ofloxacin are not inactivated by certain factors of B. coagulans OFR17. Conclusively, B. coagulans OFR17 can be regarded as a promising strain which can be developed as the preparation for the treatment of the intestinal disorders of the tuberculosis patients under rifampicin and ofloxacin therapy.