• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.129-138
• /
• 1996

This paper describes design techniques of general purpose thermal array printer, especially easily applicable to medical measurement equipment. The'general'means that the proposed thermal array printer can be applied to not only medical field but other industrial field by establishing the eligible protocol. The thermal array printer is composed of i)MPU and its peripherals ii)printer head control, iii)diverse protection circuits, and iv)serial communication. In this paper the performance of the proposed thermal array printer was evaluated by applying to an 3 channel electrocardiogram recorder. The propped system can support'Hangul'text as well as alphanumeric characters and any bitmap image.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.333-336
• /
• 2016

LIN (local interconnect network) is a standard low-speed serial communication protocol, and it was developed as an efficient sub-bus for automotive electronic modules. In this paper, a LIN controller was implemented in Verilog HDL, based on LIN ver. 2.2A. The implemented LIN controller was verified in FPGA, and it can be supplied as an IP to be integrated into SoC system. Its size is about 2,300 gates when synthesized in 0.18um technology.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2329-2331
• /
• 2001

In this paper, were developed the 3 axes attitude control sensor system to control and monitoring the moving object. The proposed sensor system has been studied in Japan, America for a year ago. But it is high expensive and has a difficulty in application. To overcome these problems, proposed the 3 axes attitude control sensor system is low cost and easily applied. Proposed sensor system is equipped with the 3 gyro sensors, 2 tilt sensors and 3 MR sensors using 80C51 microprocessor for signal processing. It's output value transmit at long distance using RS232 serial communication protocol. We expect this system shall have a good performances in many applications of control and monitoring the moving object.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.70-75
• /
• 2004

The shearing process for the sheet metal is normally used in the precision elements such as a lead frame of IC chips. In these precision elements, the burr formation brings a bad effect on the system assembly and demands the additional deburring process. In this paper, we developed the small size precision punching system to investigate burr formation mechanism and to present kinematically punch-die aligning methodology between the rectangular shaped punch and die. The punch is driven by an air cylinder and the sheet metal is moving on the X-Y table system which is driven by two stepping motors. The whole system is controlled by microprocessor and is communicated with each other by RS232C serial communication protocol. Punching results are measured manually using the SEM photographs and are compared aligning result with miss aligning one.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.253-259
• /
• 2003

This paper aims at developing remote control system to control and monitor distributed various devices such as UPS through internet. TCP/IP(Transmission Control Protocol/Internet Protocol) and UPS operated in a row are adopted for the network management protocol and the application device, respectively. For controlling and monitoring distributed devices in realtime, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.341-347
• /
• 2015

This study aims to design a chief VDR(Voyage Data Recorder) system which is appropriate to small and medium sized vessels and also implement the data about marine communication devices, sensors, etc. to be stored or printed at the navigator when those data are connected to VDR through data communication between marine navigation and VDR which are based on serial communication or internet in order to prove efficiency of the marine navigator. Also, the design of VDR is intended to be small and light in order to expand to apply it to small and medium vessels, which enables to analyze causes of marine accidents precisely through its characteristic functions which are the same as those at "vehicle mounted black-box" (location of the car, image and voice storage) by which the same roles are played on land.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM(Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring realtime moving picture data among digital information devices, we analyze USB transfer types and Descriptors and introduce the method to upgrade detailed performance of Isochronous transfer that is one of USB transfer types. In the case that Configuration descriptor of a device has Interface descriptor that has two AlternateSetting, if Isochronous transfers are not processed smoothly due to excessive bus traffic, the application of the device changes AlternateSetting of the Interface descriptor and requires a new configuration by SetInterface() request. As a result of this adaptive configuration, the least data frame rate is guaranteed to a device that the sufficient bandwidth is not alloted. And if the bus traffic is normal, the algorithm to return to the original AlteranteSetting is introduced. this introduced method resolve the bottleneck of moving picture transfer that can occur in home network connected by multiple digital devices.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.62-68
• /
• 1998

In this paper, we proposed the design of the intelligent traffic control system by using multiprocessor architecture. The inter-processor communication of the architecture is implemented by sharing the serial communication channel. In comparing the conventional traffic control system using single processor architecture, the proposed system uses multiple processors controlling the sub systems such as the signal lights, traffic measurement unit, auxiliary signal lights and peripherals. The main processor controls the communication among the processors and the communication protocol link to the central control center at remote site. The proposed architecture reduces the load and simplifies the program of each processor and enables the real time processing of the add-on features of intelligent traffic control systems. The architecture is implemented and the common channel inter-processor communications and the real time operation is experimented .experimented .