• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.71-76
• /
• 2006

Porous polymer monolithic columns were prepared by the direct free radical copolymerization of methacrylic acid and ethylene glycol dimethacrylate within the confines of a chromatographic column in the presence of toluene-dodecanol as a porogenic solvent. The separation characteristics of the monolithic columns were tested by a homologous series of xanthine derivatives, theophylline and caffeine. The effects of the polymerization mixture composition and polymerization condition, mobile phase composition, flow rate and temperature on the retention times and separation efficiencies were investigated. The results showed that the selection of correct porogenic solvents and appropriate polymerization conditions are crucial for the preparation of the monolithic stationary phases. The separation efficiency was only extremely weakly dependent on flow rate and temperatures. Hydrogen-bonding interaction played an important role in the retention and separation. Compared with conventional particle columns, the monolithic column exhibited good stability, ease of regeneration, high separation efficiency and fast analysis.

• Journal of Industrial Convergence
• /
• v.2 no.1
• /
• pp.187-216
• /
• 2004

After Asian financial crisis hit the Korea, Korean government and Korean firms need to restructure their system. Specially financial sector has to renew its system. One way renew its system was adjust company's labor system. The forms of labor adjustment are external numerical flexibility, externalization, internal numerical flexibility, functional flexibility and wage flexibility. These five forms based on two big categories which are wage flexibility and employment flexibility. This study only focus on th effect of employment flexibility in financial sector in Korea. Employment flexibilities can be practice as employment adjustment. Also we concentrate on separation and re-accessors to other financial institute after the separation. The result shows that Korean financial sector are in the range of 10.78% and the job destruction rates are about 11.26%. During the period from year 1998 to year 2002, the numbers of accession has down about 30%. The logit statistical analysis for separation shows that demographical variables and the reasons of separation affected separation and reemployment.

• Journal of Korea Water Resources Association
• /
• v.48 no.6
• /
• pp.451-461
• /
• 2015

This study aimed to estimate the future design rainfall through a non-stationary frequency analysis using the rainfall separation technique. First, we classified rainfall in the Korean Peninsula into local downpour and TC-induced rainfall through rainfall separation technique based on the path and size of a typhoon. Furthermore, we performed the analysis of regional rainfall characteristics and trends. In addition, we estimated the future design rainfall through a non-stationary frequency analysis using Gumbel distribution and carried out its quantitative comparison and evaluation. The results of the analysis suggest that the increase and decrease rate of rainfall in the Korean Peninsula were different and the increasing and decreasing tendencies were mutually contradictory at some points. In addition, a non-stationary frequency analysis was carried out by using the rainfall separation technique. The outcome of this analysis suggests that a relatively reasonable future design rainfall can be estimated. Comparing total rainfall with the future design rainfall, differences were found in the southern and eastern regions of the Korean peninsula. This means that climate change may have a different effect on the typhoon and local downpour. Thus, in the future, individual assessment of climate change impacts needs to be done through moisture separation. The results presented here are applicable in future hydraulic structures design, flood control measures related to climate change, and policy establishment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.807-812
• /
• 2020

This paper proposes a blind speech source separation algorithm using a microphone to separate only the target speech source signal in an environment in which various speech source signals are mixed. The proposed algorithm is a model of frequency domain representation based on independent component analysis method. Accordingly, for the purpose of verifying the validity of independent component analysis in the frequency domain for two speech sources, the proposed algorithm is executed by changing the type of speech sources to perform speech sources separation to verify the improvement effect. It was clarified from the experimental results by the waveform of this experiment that the two-channel speech source signals can be clearly separated compared to the original waveform. In addition, in this experiments, the proposed algorithm improves the speech source separation performance compared to the existing algorithms, from the experimental results using the target signal to interference energy ratio.

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.63-83
• /
• 1994

In this paper, the slab method have been applied to investigate the strip casting process in which hot coil is produced from molten steel directly. In the twin roll strip casting process, molten steel supplied by the nozzle cools and solidifies due to the heat extraction effect of the rolls and hot rolling of the solidified shell takes place simultaneously. The analysis of hot rolling has been carried out by using the existing results of solidification analysis for the twin roll strip casting process. The current slab method provides basic design data such as roll separation force, rolling torque, rolling power as well as end dam separation force which are required to design strip caster. The effect of friction on the basic process parameters are investigated also. It is shown that the use of appropriate friction coefficient is important and that the characteristics of hot rolling in the twin-roll strip casting process is quite different from the conventional hot rolling processes.

• Journal of Environmental Science International
• /
• v.15 no.12
• /
• pp.1199-1203
• /
• 2006

This paper analyzes the separation efficiency of vehicles mat residual product, and caloric value, element analysis and heavy metal of separated PE & PVC mat residual product. A results of separation efficiency, fiber fraction of PE & PVC mat residual product was analyzed 71.9% and 18.6%, respectively. Caloric value of PE & PVC mat residual product was analyzed 3,894kca1/kg and 10,203kca1/kg, respectively. A results of element analysis, main component of PVC mat were carbon(33.2%) and oxygen(21.0%), and main component of PE mat fiber were carbon(75.4), hydrogen(11.3%) and oxygen(9.1%). Lead and cadmium concentration of PVC powder was detected 98.9mg/kg and 19.8mg/kg, but Lead and cadmium concentration of fiber was detected 15.7mg/kg and 6.1mg/kg.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.3
• /
• pp.139-143
• /
• 2017

In this paper, we propose a separation method of the dielectric particles in the liquid flow. Since particles are dielectric in most cases, they experience dielectrophoretic(DEP) force under non-uniform electric field. The field characteristics in the electromagnetic and fluid dynamic systems are solved by using the finite element method. The motional equation of the particles is calculated by the Runge-Kutta method. The field analysis shows the feasibility of the proposed method. The particle separation model with large DEP force exerting on particles is designed by analyzing field characteristics.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.41-46
• /
• 2004

This paper proposes a separation of mixed signals by using the robust independent component analysis(RICA) based on neural networks. RICA is based on the temporal correlations and the second order statistics of signal. This method e is applied for improving the analysis rate and speed in which the sources have very small or zero kurtosis. The proposed method has been applied for separating the 10 mixed finger prints of $256{\times}256$-pixel and the 4 mixed images of $512{\times}512$-pixel, respectively. The simulation results show that RICA has the separating rate and speed better than those using the conventional FP algorithm based on Newton method.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.107-113
• /
• 2008

program package for store separation analysis, SAFESEP, has been developed. The package includes CTS system software, 3-Dimensional visualization software, off-line store trajectory software and aerodynamic database software. In this paper, we describe the functions and the capabilities of the store separation analysis program package.

• Nuclear Engineering and Technology
• /
• v.29 no.5
• /
• pp.399-405
• /
• 1997

In this study a new phase separated spectral analysis algorithm is proposed to identify CSB vibration mode directly from ex-core neutron signals. Ex-core neutron signals can be decomposed into the global, core support barrel (CSB) beam mode, and CSB shell mode components by the new phase separation algorithm based on the characteristics of Fourier transform. By using the proposed algorithm and the conventional spectral analysis the vibration mode of the CSB and the fuel assembly of Ulchin-1 NPP were identified from measured ex-core neutron signals.